TSM-135-04-S-SH-A SAMTEC Connector (Other) In Stock
SAMTEC TSM-135-04-S-SH-A is a 35-position single-row horizontal shrouded surface-mount terminal strip with 0.100" (2.54 mm) pitch, offering polarized cable-to-board connections with a taller shroud height than standard variants. Available from authorized distributors with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 35
- Lifecycle
- ACTIVE
- Datasheet
- TSM-135-04-S-SH-A Datasheet PDF
- Category
- Connector
- Price
- From $4.1300(MOQ 250)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TSM-135-04-S-SH-A?
- 35-position single-row horizontal layout at 0.100" (2.54 mm) pitch with taller SH-A shroud for enhanced mating guidance and contact protection
- Shrouded SMT design enforces polarized mating orientation, reducing field wiring errors in multi-connector panel assemblies
- Surface-mount technology footprint compatible with standard automated reflow soldering at peak temperatures up to 260°C
What is TSM-135-04-S-SH-A used for?
The TSM-135-04-S-SH-A is suited for embedded system backplanes, industrial controller I/O panels, and test instrument front-ends requiring a 35-position shrouded cable header at 2.54 mm pitch. The taller shroud (04 height code) provides additional mechanical protection for the 35 contacts during cable connection in field-service or harsh industrial environments. It is also used on development and evaluation boards where flat ribbon cables or discrete wire harnesses must be frequently connected and disconnected without risk of contact damage.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TSM-135-04-S-SH-A datasheet?
TSM-135-04-S-SH-A Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TSM-135-04-S-SH-A?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the -04 height code on the TSM-135-04-S-SH-A differ from the -03 variant in terms of shroud dimensions?
The -04 suffix on the TSM-135-04-S-SH-A designates a taller shroud height compared to the -03 version, typically adding approximately 1 mm to 2 mm of additional plastic wall height above the contact tips. This extra clearance improves mechanical guidance during mating at 0.100" (2.54 mm) pitch and provides better physical protection of all 35 contacts against accidental damage in environments where cables are connected by hand without precise alignment fixtures.
For a 35-channel sensor interface panel, why choose the TSM-135-04-S-SH-A over an unshrouded header?
An unshrouded header allows a mating plug to be inserted off-center or at the wrong angle, potentially bending contacts or creating intermittent connections across the 35-position interface. The TSM-135-04-S-SH-A shroud physically constrains the mating connector to correct alignment within approximately 0.5 mm tolerance, ensuring all 35 contacts engage simultaneously and preventing the single-pin misalignment faults that cause difficult-to-diagnose intermittent failures in multi-channel sensor and actuator wiring.
What ribbon cable or discrete wire assemblies mate with TSM-135-04-S-SH-A in a complete wire-to-board solution?
The TSM-135-04-S-SH-A mates with standard 0.100" (2.54 mm) pitch single-row female crimp housings and 35-conductor IDC ribbon cable connectors rated for 28 AWG conductors at up to 300 V and 1 A per contact. Flat ribbon cable widths for 35-conductor single-row assemblies are approximately 44.5 mm, and the horizontal exit orientation of the SH-A package allows cable routing parallel to the PCB surface to minimize connector height above board.
When evaluating TSM-135-04-S-SH-A versus a dual-row 18-position header for a 35-signal interface, what layout tradeoffs arise?
The TSM-135-04-S-SH-A single-row 35-position format spans approximately 88.9 mm in board length at 2.54 mm pitch, whereas a dual-row 18-position header accommodating 36 signals occupies only about 45 mm. Designers should choose the TSM-135-04-S-SH-A when board edge space is available along one axis and single-row ribbon cable assemblies are preferred for cable identification simplicity, accepting the longer board edge requirement in exchange for lower cable complexity and reduced connector height profile.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 250+ | $5.7500 | $1437.50 |
| 500+ | $5.3200 | $2660.00 |
| 1000+ | $4.1300 | $4130.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector