TSM-133-02-S-DH-A-K-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-133-02-S-DH-A-K-TR is a 66-position dual-row surface mount terminal strip on a 0.100 inch (2.54 mm) pitch, providing high pin count board-to-board or wire-to-board connectivity for computing, industrial, and test instrumentation designs.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 66
- Lifecycle
- ACTIVE
- Datasheet
- TSM-133-02-S-DH-A-K-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 66-position dual-row surface mount terminal strip with 0.100 inch (2.54 mm) pitch
- High pin count design supporting up to 66 discrete signal, power, or ground connections
- Surface mount configuration for automated SMT assembly and reflow soldering compatibility
- Standard 2.54 mm pitch ensures broad mating connector compatibility across manufacturers
- RoHS compliant for use in environmentally regulated markets worldwide
Applications
The TSM-133-02-S-DH-A-K-TR is suited for high-density board expansion interfaces in FPGA evaluation boards, embedded computing modules, and industrial control cards where 66 or more signal lines must be routed through a single surface mount connector. Its dual-row 0.100 inch pitch layout is also commonly used in backplane interconnects and multi-channel data acquisition systems.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many contact positions does TSM-133-02-S-DH-A-K-TR provide, and how are they arranged?
TSM-133-02-S-DH-A-K-TR provides 66 pins arranged in 2 rows of 33 contacts on a 0.100 inch (2.54 mm) pitch, offering a compact dual-row layout that supports up to 66 simultaneous signal or power connections from a single surface mount footprint.
When replacing a through-hole dual-row header with TSM-133-02-S-DH-A-K-TR, what assembly process changes are required?
Switching to TSM-133-02-S-DH-A-K-TR requires updating the PCB land pattern to SMT pads rather than through-hole drill patterns. The reflow solder profile should peak at 260°C for 30 seconds maximum, consistent with SAMTEC TSM series MSL ratings for lead-free assembly.
Which SAMTEC mating connector family pairs with TSM-133-02-S-DH-A-K-TR for a reliable 66-pin interface?
SAMTEC TSM-series surface mount terminal strips on a 0.100 inch pitch are designed to mate with TSW or SSW series dual-row receptacles, providing a low-profile 66-pin interface with positive mating engagement. Verify the mating height requirement — typically 8.5 mm to 11 mm — against your board stacking clearance.
For a multi-axis motion controller needing 60+ I/O lines, does TSM-133-02-S-DH-A-K-TR fit within a standard 100 mm PCB edge?
TSM-133-02-S-DH-A-K-TR on a 0.100 inch pitch spans approximately 83 mm in length for 33 positions per row, fitting within a 100 mm PCB edge. This makes it practical for compact multi-axis motion controller I/O headers that require 66 pins in a single connector.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”