TSM-132-05-TM-SH-P-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-132-05-TM-SH-P-TR is a 32-position dual-row surface mount terminal strip at 0.100" pitch with single-row vertical orientation, mid-height (TM) contact, shrouded housing, and tape-and-reel packaging. It provides 32-contact SMT board connectivity with guided mating for reliable assembly in industrial and embedded designs. Available in stock worldwide with fast shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 32
- Lifecycle
- ACTIVE
- Datasheet
- TSM-132-05-TM-SH-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 32-position dual-row 0.100" pitch SMT terminal strip with mid-height contacts optimized for controlled standoff in surface mount assemblies
- Shrouded housing keying prevents connector mismatch across all 32 positions, reducing field wiring errors in dense PCB enclosures
- Tape-and-reel packaging enables automated pick-and-place SMT assembly, reducing per-unit placement cost in medium and high volume production
Applications
The TSM-132-05-TM-SH-P-TR is designed for 32-signal board-to-cable and board-to-board connections in embedded control systems, industrial I/O panels, and laboratory instruments. Its mid-height contact variant provides a consistent standoff between the connector body and the PCB, which suits wave or reflow soldering processes with tight clearance requirements beneath the connector. The shrouded form factor reduces mismating risk during installation in enclosed equipment.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the mid-height (TM) contact variant of the TSM-132-05-TM-SH-P-TR differ from standard or tall contact versions for SMT assembly?
The mid-height TM contact sits between standard and tall variants, offering a standoff height that balances mechanical stability and solder-joint access for inspection and rework. For 32-position SMT terminal strips on boards with components below 3 mm height, the TM contact reduces the risk of connector tilt during reflow while still providing enough clearance for post-solder visual inspection of all 32 joints.
Which embedded control or industrial I/O applications are best served by a 32-position shrouded surface mount connector like the TSM-132-05-TM-SH-P-TR?
Applications such as PLC expansion modules, servo drive signal boards, and multi-axis motion control interfaces benefit most, as they frequently require 32 discrete signal lines between a main controller and an I/O daughter card. The shroud guides the mating plug into the correct 32-pin alignment, preventing cross-connection of control and sensor signals that could trigger fault conditions in the connected actuators.
For a procurement engineer comparing TSM-132-05-TM-SH-P-TR with through-hole alternatives, what SMT-specific supply chain considerations apply?
The tape-and-reel (TR) format makes TSM-132-05-TM-SH-P-TR compatible with standard SMT reel sizes used by contract manufacturers, typically 7-inch or 13-inch reels. This eliminates the need for manual insertion and post-solder press-fit steps required by through-hole equivalents, reducing assembly labor costs by several cents per connector and enabling single-pass reflow processing for boards with 32-position connector requirements.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”