TSM-132-01-T-DH-P-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-132-01-T-DH-P-TR is a 64-position, single-row, 0.100" pitch surface mount terminal strip with through-hole tails. Designed for secure PCB-to-cable or board-to-board connections with polarized keying options and rated up to 3 A per contact. Available in stock globally with fast worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 64
- Lifecycle
- ACTIVE
- Datasheet
- TSM-132-01-T-DH-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TSM-132-01-T-DH-P-TR?
- 64 positions single-row 0.100" pitch surface mount terminal strip for standard-density board interconnect
- Dual-height (DH) body option supports stacking and elevated component clearance in multi-board assemblies
- Polarized (P) keying prevents incorrect mating orientation, reducing assembly errors in production
- Tape-and-reel (TR) packaging enables automated SMT pick-and-place at high production volumes
What is TSM-132-01-T-DH-P-TR used for?
The TSM-132-01-T-DH-P-TR is designed for board-to-board and board-to-cable connectivity in industrial automation, consumer electronics, and embedded computing platforms. Its 64-position single-row layout and 0.100" pitch accommodate a wide range of signal and power routing requirements, from microcontroller GPIO headers to peripheral expansion buses. The dual-height body variant is especially useful when component height clearance between stacked PCBs is a design constraint.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TSM-132-01-T-DH-P-TR datasheet?
TSM-132-01-T-DH-P-TR Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TSM-132-01-T-DH-P-TR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What does the dual-height (DH) designation mean for the TSM-132-01-T-DH-P-TR and when is it required?
The DH designation indicates a dual-height connector body that raises the mating interface by approximately 8.5 mm above the PCB surface, providing clearance for components mounted on the opposing board in a stacked configuration. This is required when standard-height connectors would cause mechanical interference with taller passives, heat sinks, or ICs on the mated board. The 64-position dual-height format is common in sandwich-style board stacks found in embedded computing and test systems.
What current rating does each contact in the TSM-132-01-T-DH-P-TR support, and how many power pins can be used simultaneously?
Each contact in this terminal strip carries up to 3 A at a maximum of 125 V AC/DC. With 64 total positions available in the single-row configuration, designers can allocate multiple adjacent pins for higher power delivery—grouping 4 pins yields up to 12 A aggregate current—while reserving remaining contacts for signal lines. This makes the part suitable for mixed power-and-signal boards in industrial motor drives and robotics controllers.
How does the polarized (P) keying on TSM-132-01-T-DH-P-TR prevent mis-mating during field service?
The -P suffix designates a keying peg molded into the connector housing that mates only with a correspondingly notched header, preventing reversal or offset insertion by even a single position. This polarization is critical for 64-pin assemblies where a single-pin offset would damage traces or power rails. Field technicians replacing boards in the dark or under time pressure benefit from the physical lock, which provides audible and tactile confirmation of correct seating.
In what board-to-board stacking scenario is TSM-132-01-T-DH-P-TR preferred over a standard-height TSM variant?
When a daughter card mounts components taller than 5 mm—such as electrolytic capacitors, oscillators, or tall SOT-89 devices—the dual-height TSM-132-01-T-DH-P-TR provides the extra 8.5 mm of vertical clearance needed to prevent mechanical collision in the assembled stack. Standard-height variants suit low-profile PCBs with no tall components, while the DH version is chosen for embedded SBCs, RF shield boards, and power-module stacking designs.
Related Guides
How to Choose an Indicator LED: TLMG1100-GS08 Selection Guide
Select TLMG1100-GS08 and evaluate four indicator LED candidates through optical, electrical, footprint, and sourcing checks.
Nov 5, 2026
150141YS73100 Yellow LED Indicator Design and Validation Guide
Design and validate a 150141YS73100 yellow indicator with current-limit calculations, GPIO checks, PWM control, and enclosure visibility tests.
Nov 5, 2026
How to Choose an LMG1020YFFR GaN Gate Driver: Selection and Sourcing Guide
Compare LMG1020 and LMG1210 circuit roles, gate-drive requirements, ordering codes, and sourcing evidence before approving a GaN driver.
Nov 4, 2026
150141YS73100 LED Selection and Procurement Guide
Evaluate 150141YS73100 and four related LEDs using optical, electrical, mechanical, and sourcing checks before production approval.
Nov 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector