TSM-128-03-FM-DH-P-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-128-03-FM-DH-P-TR is a 56-position, 0.100" (2.54 mm) pitch dual-row surface-mount terminal strip with female machined contacts, offering high pin density and tape-and-reel packaging for automated SMT manufacturing.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 56
- Lifecycle
- ACTIVE
- Datasheet
- TSM-128-03-FM-DH-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TSM-128-03-FM-DH-P-TR?
- 56 positions in a dual-row 0.100" (2.54 mm) pitch configuration for dense I/O routing
- Female machined contacts (FM suffix) for precision mating with corresponding header pins
- Surface-mount with dual-row headers and tape-and-reel (TR) for pick-and-place automation
- DH variant combines SMD and through-hole tails for enhanced mechanical board retention
- SAMTEC precision machined contacts delivering consistent electrical performance across mating cycles
What is TSM-128-03-FM-DH-P-TR used for?
TSM-128-03-FM-DH-P-TR is used in dense backplane interconnects, FPGA daughter cards, and high-channel-count test and measurement interfaces where 56 signal pins at 2.54 mm pitch are required in surface-mount form. The tape-and-reel packaging supports volume production lines for industrial computing, communications infrastructure, and embedded control applications.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TSM-128-03-FM-DH-P-TR datasheet?
TSM-128-03-FM-DH-P-TR Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TSM-128-03-FM-DH-P-TR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many positions does TSM-128-03-FM-DH-P-TR provide and what is the pin pitch?
TSM-128-03-FM-DH-P-TR provides 56 positions on a dual-row 0.100" (2.54 mm) pitch layout. This gives designers 56 signal or power pins in a compact SMT footprint compatible with standard 2.54 mm grid PCB designs used in industrial and communications hardware.
What does the FM suffix indicate, and why choose machined contacts for this connector?
The FM suffix denotes female machined contacts, which offer tighter dimensional tolerances and longer mating cycle life compared to stamped contacts. For a 56-pin, 0.100" pitch connector used in FPGA or backplane applications, machined contacts ensure repeatable low-contact-resistance mating across hundreds of insertion cycles.
Does TSM-128-03-FM-DH-P-TR support automated SMT assembly, and what packaging is it offered in?
Yes. The TR suffix confirms tape-and-reel packaging, fully compatible with standard SMT pick-and-place equipment. The 56-position dual-row body also includes through-hole tails (DH suffix) that anchor the connector to the PCB, improving solder-joint reliability in vibration-prone industrial or computing environments.
When would a procurement team select TSM-128-03-FM-DH-P-TR over a lower pin-count alternative?
Engineers specify TSM-128-03-FM-DH-P-TR when 56 pins are required to carry parallel data buses, GPIO expanders, or multi-channel sensor signals on a single 0.100" pitch connector. Choosing 56 positions over two separate 28-pin connectors reduces board placement steps and aligns all 56 signals on a single 2.54 mm pitch row pair.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector