TSM-126-05-F-SH-P-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-126-05-F-SH-P-TR is a 26-position single-row vertical surface mount terminal strip with 0.100-inch (2.54 mm) pitch, providing reliable PCB signal termination in an SMT form factor. Tape-and-reel packaging supports high-volume automated assembly. Available with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 26
- Lifecycle
- ACTIVE
- Datasheet
- TSM-126-05-F-SH-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 26-position single-row vertical SMT terminal strip with 0.100-inch (2.54 mm) pitch for standard-density signal routing on PCBs
- Surface mount termination compatible with automated reflow soldering and high-speed pick-and-place assembly
- Tape-and-reel (-TR) packaging enabling consistent component orientation and efficient use in volume PCB manufacturing
Applications
The TSM-126-05-F-SH-P-TR is used for 26-channel wire-to-board and board-to-board signal connections in industrial controllers, embedded computing boards, and instrumentation equipment. Its 0.100-inch pitch single-row vertical layout simplifies PCB trace routing along board edges. The SMT format reduces board height compared to through-hole alternatives in space-constrained enclosures.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many signal positions does the TSM-126-05-F-SH-P-TR provide and what is its contact pitch?
The TSM-126-05-F-SH-P-TR provides 26 signal positions in a single-row vertical surface mount layout with a 0.100-inch (2.54 mm) pitch, spanning a total linear length of approximately 2.6 inches along the PCB edge for straightforward trace routing.
For an industrial controller needing 26 signal connections, why choose a surface mount TSM-126-05-F-SH-P-TR over a through-hole alternative?
The TSM-126-05-F-SH-P-TR uses surface mount termination, eliminating the need to drill 26 through-holes, reducing board fabrication cost and enabling lower-profile PCB assemblies. The tape-and-reel packaging also allows automated pick-and-place placement at 0.100-inch (2.54 mm) pitch, speeding up production.
Can the TSM-126-05-F-SH-P-TR be used alongside standard 0.100-inch pitch mating headers from other manufacturers?
The TSM-126-05-F-SH-P-TR is designed on the industry-standard 0.100-inch (2.54 mm) pitch, which is compatible with a wide range of male headers and mating connectors from multiple manufacturers, giving designers broad sourcing flexibility for the 26-position interface.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”