TSM-126-04-TL-SH-A SAMTEC Connector (Other) In Stock
SAMTEC TSM-126-04-TL-SH-A is a 26-position, dual-row surface-mount terminal strip with a standard 0.100" (2.54 mm) pitch and horizontal orientation. It provides a reliable through-hole-compatible footprint in a surface-mount form, supporting up to 3 A per pin for general-purpose interconnect in industrial and consumer PCB designs.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 26
- Lifecycle
- ACTIVE
- Datasheet
- TSM-126-04-TL-SH-A Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 26 dual-row positions on 0.100" (2.54 mm) pitch for broad compatibility with standard PCB grid layouts
- Surface-mount terminal strip with horizontal orientation simplifies high-density board edge and inter-board signal routing
- Rated up to 3 A per pin with gold-plated contacts for low-resistance, reliable connections in industrial applications
Applications
The TSM-126-04-TL-SH-A is used in prototyping, test fixtures, and production PCBs where a 26-position, 0.100" pitch dual-row connector is needed in a surface-mount footprint. It is commonly found in industrial control boards, embedded computing modules, and instrumentation where a horizontal terminal strip provides straightforward access to multiple signal and power lines.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What pitch and current rating does the SAMTEC TSM-126-04-TL-SH-A support?
The TSM-126-04-TL-SH-A uses a 0.100" (2.54 mm) pitch across 26 dual-row positions and is rated up to 3 A per pin, making it compatible with standard PCB grid designs and suitable for mixed signal and moderate-power routing.
When would a designer choose the TSM-126-04-TL-SH-A over a standard through-hole header?
Designers select the TSM-126-04-TL-SH-A when a surface-mount assembly process is required but a 0.100" pitch dual-row connector is still needed, eliminating through-hole drilling while maintaining compatibility with 2.54 mm grid footprints and supporting up to 3 A per pin.
Which embedded and instrumentation applications are well-matched to the TSM-126-04-TL-SH-A?
Industrial control modules, embedded single-board computers, and test-and-measurement breakout boards benefit from this 26-position, 0.100" pitch surface-mount terminal strip. Its 26 dual-row contacts handle both digital signals and moderate power rails within the 3 A per-pin rating, reducing wiring complexity in compact enclosures.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”