TSM-126-03-FM-DH-A-K-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-126-03-FM-DH-A-K-TR is a 52-position dual-row surface mount terminal strip on 0.100 inch pitch with flush-mount SMT tails and tape-and-reel packaging for high-volume automated PCB placement.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 52
- Lifecycle
- ACTIVE
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TSM-126-03-FM-DH-A-K-TR?
- 52-position dual-row configuration on 0.100 inch (2.54 mm) pitch maximizing signal density in surface mount applications
- Flush-mount (FM) SMT termination profile reduces connector height and improves PCB clearance in low-profile assemblies
- Tape-and-reel (TR) packaging compatible with standard EIA-481 SMT feeders for high-speed automated pick-and-place production
What is TSM-126-03-FM-DH-A-K-TR used for?
The TSM-126-03-FM-DH-A-K-TR is used in high-density board-to-board signal routing for embedded computing modules, FPGA evaluation boards, and communications interface cards requiring 52 contacts on 0.100 inch pitch. Its flush-mount SMT tails reduce the overall mated height, making it suitable for compact enclosures with tight PCB-to-panel clearances. The dual-row layout and tape-and-reel packaging streamline automated assembly for industrial control systems and high-volume telecom hardware.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TSM-126-03-FM-DH-A-K-TR datasheet?
TSM-126-03-FM-DH-A-K-TR Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TSM-126-03-FM-DH-A-K-TR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What contact count and pitch does the TSM-126-03-FM-DH-A-K-TR support?
The TSM-126-03-FM-DH-A-K-TR provides 52 contacts arranged in a dual-row format with 0.100 inch (2.54 mm) center-to-center pitch. This high contact density is suitable for applications requiring many I/O lines within a standard through-hole or SMT footprint.
How does the flush-mount termination of the TSM-126-03-FM-DH-A-K-TR differ from standard SMT tails?
The flush-mount (FM) termination sits level with the PCB surface pads, minimizing standoff height compared to gull-wing or J-lead profiles. This allows lower mated stack heights—often below 8 mm—making the connector suitable for slim industrial modules and computing blades with strict height budgets.
Which automation-friendly packaging does the TSM-126-03-FM-DH-A-K-TR use, and how many units fit per reel?
The TR suffix indicates tape-and-reel packaging compliant with EIA-481 carrier tape standards, enabling automated SMT placement at rates exceeding 5,000 parts per hour. Reel quantities typically range from 250 to 1,000 pieces per reel depending on part size, reducing changeover downtime on high-volume lines.
In which scenarios would the TSM-126-03-FM-DH-A-K-TR be preferred over a standard through-hole pin header with 52 positions?
The TSM-126-03-FM-DH-A-K-TR is preferred when the PCB assembly uses full SMT reflow rather than wave solder, or when both sides of the board are populated and through-hole drilling is impractical. Its 0.100 inch pitch maintains compatibility with existing dual-row mating receptacles while eliminating drill holes and reducing board fabrication cost.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector