TSM-123-05-S-SH-P-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-123-05-S-SH-P-TR is a 23-position dual-row surface-mount terminal strip with 0.100 inch (2.54 mm) pitch and single-row vertical mating interface. It provides robust SMT board-to-board or wire-to-board connectivity with standard 2.54 mm spacing for broad mating-header compatibility. Available in tape-and-reel packaging in stock worldwide for volume SMT assembly.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 23
- Lifecycle
- ACTIVE
- Datasheet
- TSM-123-05-S-SH-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TSM-123-05-S-SH-P-TR?
- 23-position dual-row layout on 0.100 inch (2.54 mm) pitch supporting a wide range of compatible mating receptacles and jumper housings
- Surface-mount termination compatible with lead-free reflow soldering up to 260°C for automated SMT production lines
- Single-row vertical mating orientation enabling straightforward stacking with standard 0.100 inch pitch headers and receptacles
- Tape-and-reel (TR) packaging allowing continuous pick-and-place feeder operation for high-throughput SMT assembly
What is TSM-123-05-S-SH-P-TR used for?
The TSM-123-05-S-SH-P-TR is a standard 2.54 mm pitch terminal strip suited to backplane interconnects, industrial control boards, and development platform headers where 23 signals or power lines must be routed in a compact dual-row SMT footprint. It pairs with common 0.100 inch pitch mating receptacles used in prototyping, embedded computing, and communication expansion modules. Its tape-and-reel format and SMT termination support fully automated assembly in mid- to high-volume PCB production environments.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TSM-123-05-S-SH-P-TR datasheet?
TSM-123-05-S-SH-P-TR Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TSM-123-05-S-SH-P-TR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the TSM-123-05-S-SH-P-TR dual-row configuration reduce board edge consumption compared to a single-row 23-position connector?
Arranging 23 contacts in two rows on a 0.100 inch (2.54 mm) pitch occupies roughly half the linear board-edge length compared to a single-row connector of the same position count. For a 23-position single-row header the footprint would span approximately 56 mm, whereas the dual-row TSM-123-05-S-SH-P-TR compresses this to around 30 mm, freeing board edge real estate for additional connectors or routing vias.
Which mating connector families are compatible with the TSM-123-05-S-SH-P-TR's 0.100 inch pitch interface?
The 0.100 inch (2.54 mm) pitch is an industry-standard spacing compatible with SAMTEC's own SSW and SFH receptacle series as well as widely available third-party 2.54 mm pitch female headers, IDC connectors, and jumper housings. This broad compatibility simplifies prototype board-to-board mating and allows designers to source replacement receptacles from multiple suppliers.
For an industrial control PCB with automated SMT assembly, what soldering process is recommended for the TSM-123-05-S-SH-P-TR?
The TSM-123-05-S-SH-P-TR uses SMT solder tails compatible with standard lead-free reflow processes peaking at approximately 260°C per JEDEC J-STD-020. Its tape-and-reel packaging feeds directly into pick-and-place equipment, and the land pattern follows IPC-7351 guidelines for 0.100 inch pitch SMT connectors, making it straightforward to incorporate into existing SMT line recipes.
Is the TSM-123-05-S-SH-P-TR a suitable alternative to through-hole terminal strips when migrating a legacy design to full SMT assembly?
Yes. The TSM-123-05-S-SH-P-TR provides the same 0.100 inch (2.54 mm) pitch and 23-position dual-row signal capacity as common through-hole terminal strips but with SMT solder tails, eliminating the need for wave soldering or hand-soldering steps. Migrating to this SMT strip reduces assembly cycle time and allows the board to run through a single reflow pass alongside all other SMT components.
Related Guides
How to Choose an Indicator LED: TLMG1100-GS08 Selection Guide
Select TLMG1100-GS08 and evaluate four indicator LED candidates through optical, electrical, footprint, and sourcing checks.
Nov 5, 2026
150141YS73100 Yellow LED Indicator Design and Validation Guide
Design and validate a 150141YS73100 yellow indicator with current-limit calculations, GPIO checks, PWM control, and enclosure visibility tests.
Nov 5, 2026
How to Choose an LMG1020YFFR GaN Gate Driver: Selection and Sourcing Guide
Compare LMG1020 and LMG1210 circuit roles, gate-drive requirements, ordering codes, and sourcing evidence before approving a GaN driver.
Nov 4, 2026
150141YS73100 LED Selection and Procurement Guide
Evaluate 150141YS73100 and four related LEDs using optical, electrical, mechanical, and sourcing checks before production approval.
Nov 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector