TSM-122-05-L-SH-P-TR SAMTEC Connector (Other) In Stock
TSM-122-05-L-SH-P-TR is a 22-position single-row vertical surface-mount terminal strip from SAMTEC with 0.100-inch pitch and integral shielding. It delivers reliable signal connectivity for high-density SMT applications with an L-shaped right-angle termination style. Available from stock worldwide in tape-and-reel packaging for automated assembly.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 22
- Lifecycle
- ACTIVE
- Datasheet
- TSM-122-05-L-SH-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 22-position single-row vertical SMT terminal strip with 0.100-inch (2.54 mm) pitch matching standard PCB grid layouts
- Integral shield (SH) housing providing EMI attenuation for noise-sensitive signal lines adjacent to power stages or RF circuits
- Tape-and-reel (TR) packaging compatible with high-volume automated pick-and-place assembly processes at standard reel sizes
Applications
The TSM-122-05-L-SH-P-TR is intended for surface-mount board-to-board and ribbon-cable interconnect applications in industrial automation, embedded computing, and test instrumentation where 22 signal channels at 0.100-inch pitch are required with EMI shielding. Its L-type right-angle contact geometry enables low-profile horizontal cable routing parallel to the PCB surface, reducing connector height clearance requirements. Design engineers specify this terminal strip for expansion module interfaces, sensor array connections, and signal distribution headers in shielded PCB assemblies.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many signal positions does the TSM-122-05-L-SH-P-TR provide, and at what contact pitch?
The TSM-122-05-L-SH-P-TR provides 22 positions at 0.100-inch (2.54 mm) pitch in a single-row surface-mount configuration, spanning approximately 2.2 inches of board edge length and accommodating 22 independent signal or power lines with individual contact current ratings up to 1 A per pin in typical SMT applications.
When is the shielded (SH) version of the TSM-122 series preferred over the unshielded variant in PCB design?
The shielded SH variant is preferred when the terminal strip routes signals within 10 mm of switching regulators, digital clock lines, or RF antennas operating above 10 MHz, where the metal shield provides 15 dB or more of isolation compared to unshielded versions, protecting sensitive analog inputs, low-speed serial buses, and sensor signals from radiated EMI coupling.
Does the tape-and-reel format of the TSM-122-05-L-SH-P-TR support high-volume PCB manufacturing, and what reel size is typical?
Yes, the -TR suffix confirms tape-and-reel packaging on standard 7-inch or 13-inch reels holding several hundred to thousands of pieces per reel, enabling uninterrupted automated SMT pick-and-place runs at throughput rates exceeding 10,000 placements per hour on modern assembly lines handling the TSM-122-05-L-SH-P-TR in volume production.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”