TSM-122-01-SS-DH-A-K-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-122-01-SS-DH-A-K-TR is a 44-position, 0.100" pitch dual-row surface mount terminal strip with solder-slug termination. Offers robust high-channel-count connectivity for industrial and embedded computing boards. Supplied in tape-and-reel packaging for automated SMT pick-and-place assembly.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 44
- Lifecycle
- ACTIVE
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TSM-122-01-SS-DH-A-K-TR?
- 44-position dual-row terminal strip on 0.100" (2.54 mm) pitch covers a broad range of signal routing needs on standard PCB grids
- Solder-slug (SS) termination provides a flat, wide contact pad for reliable solder joint formation and improved adhesion during reflow
- Gold-plated contacts maintain contact resistance below 20 milliohms across extended service life and multiple mating cycles
- Tape-and-reel (TR) packaging enables continuous automated pick-and-place assembly at high production volumes
What is TSM-122-01-SS-DH-A-K-TR used for?
The TSM-122-01-SS-DH-A-K-TR is used in industrial control backplanes, embedded system expansion boards, and test and measurement equipment that require 44 signal connections on a standard 2.54 mm pitch dual-row terminal strip. Its solder-slug termination ensures consistent solder joint quality during reflow in dense PCB assemblies with tightly spaced pads. The tape-and-reel format supports integration into automated SMT lines at high throughput volumes.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TSM-122-01-SS-DH-A-K-TR datasheet?
TSM-122-01-SS-DH-A-K-TR Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TSM-122-01-SS-DH-A-K-TR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the contact count and pitch of the TSM-122-01-SS-DH-A-K-TR?
The TSM-122-01-SS-DH-A-K-TR provides 44 contacts in a dual-row layout on a 0.100 inch (2.54 mm) pitch, making it a mid-to-high density surface mount terminal strip suited for industrial control boards and embedded systems needing 44 signal channels through a single reliable connector on a standard PCB grid.
What benefits does the solder-slug termination of TSM-122-01-SS-DH-A-K-TR offer during PCB assembly?
The solder-slug (SS) termination on TSM-122-01-SS-DH-A-K-TR provides a flat, wide solder contact surface that distributes solder paste more evenly across the 44-position pad footprint, reducing bridging and voiding risk during reflow and improving joint strength compared to standard round lead terminations in dense SMT assemblies.
How does TSM-122-01-SS-DH-A-K-TR support high-volume manufacturing workflows?
Packaged in tape-and-reel (TR) format, TSM-122-01-SS-DH-A-K-TR feeds directly into automated pick-and-place equipment at standard 8 mm or 12 mm tape widths, enabling placement of thousands of 44-pin connectors per hour with high accuracy and minimal manual intervention, reducing per-unit assembly cost in volume SMT production.
When would TSM-122-01-SS-DH-A-K-TR be selected over a 0.050 inch pitch connector for the same pin count?
The TSM-122-01-SS-DH-A-K-TR at 0.100 inch (2.54 mm) pitch is preferred over finer-pitch alternatives when connectors must mate with standard header pins on adjacent boards or backplanes, when wider solder pad spacing improves solder joint inspection reliability, or when lower-cost PCB fabrication with 2.54 mm grid routing is required for the 44-pin interface.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector