TSM-121-03-TL-DH-A-K-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-121-03-TL-DH-A-K-TR is a 42-position dual-row surface-mount terminal strip with 0.100" (2.54 mm) pitch in tape-and-reel packaging. It delivers high-density board-level interconnect with gold-plated contacts for reliable signal and power routing. Available in stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 42
- Lifecycle
- ACTIVE
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 42-position dual-row terminal strip at 0.100" (2.54 mm) pitch providing 21 positions per row in a compact SMT footprint
- Gold-plated contacts ensuring contact resistance below 20 mΩ and reliable mating over hundreds of cycles
- Tape-and-reel (TR) packaging for seamless automated pick-and-place assembly at high production volumes
- Surface-mount design compatible with lead-free reflow soldering processes up to 260°C
Applications
The TSM-121-03-TL-DH-A-K-TR is deployed in high-channel-count embedded systems, multi-axis motor controller boards, and complex backplane daughter-card interconnects where 42 positions accommodate a mix of power, ground, and data signals on a single connector. The 0.100" pitch and dual-row configuration keep the connector body length at approximately 53.34 mm while maintaining compatibility with standard 2.54 mm mating plugs and IDC cable assemblies. Tape-and-reel packaging further simplifies integration into automated SMT assembly workflows for medium and high production volumes.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What position count and row configuration does the TSM-121-03-TL-DH-A-K-TR use?
The TSM-121-03-TL-DH-A-K-TR is a 42-position dual-row connector with 21 contacts per row arranged at 0.100" (2.54 mm) pitch. The total connector body length is approximately 53.34 mm, making it suitable for applications requiring a large number of signal and power channels at a standard 2.54 mm pitch.
How does a 42-position dual-row connector compare to two smaller connectors in board space usage?
A single 42-position dual-row connector at 0.100" pitch occupies approximately 53.34 mm in length and 5.08 mm in width, whereas two 21-position single-row connectors of the same pitch would each span 53.34 mm in length placed side by side. Combining them into one dual-row unit consolidates the mechanical footprint and eliminates the 5 mm keepout gap that would normally separate two adjacent single-row headers.
Can TSM-121-03-TL-DH-A-K-TR contacts carry power rails alongside data signals?
Yes, contacts in SAMTEC TSM series dual-row strips are typically rated at 3 A per pin, allowing engineers to reserve several of the 42 positions for power and ground distribution while the remaining contacts handle signal lines. This mixed power-and-signal arrangement in a single 53.34 mm body reduces overall connector count and simplifies PCB layout in complex embedded designs.
What is the lead time or packaging advantage of ordering the TSM-121-03-TL-DH-A-K-TR in tape-and-reel format?
The -TR suffix specifies tape-and-reel packaging, typically available on 13-inch reels holding 250 to 500 units per reel. This format enables continuous automated SMT placement without manual re-loading, reducing changeover time per batch and improving throughput for production runs of 500 or more units compared to tube-packaged variants of the same connector.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”