TSM-119-02-L-DH-A-K-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-119-02-L-DH-A-K-TR is a 38-position dual-row right-angle surface mount terminal strip with 0.100" (2.54 mm) pitch and dual-height insulator, designed for side-access board-to-board interconnect in industrial and embedded systems. Precision contacts with gold plating and tape-and-reel packaging ensure reliable SMT reflow assembly and consistent electrical performance. Available in stock for worldwide shipping with competitive pricing.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 38
- Lifecycle
- ACTIVE
- Datasheet
- TSM-119-02-L-DH-A-K-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 38-position dual-row right-angle (L) layout at 0.100" (2.54 mm) pitch enables horizontal side-access mating for card-cage and panel-mount PCB designs
- Dual-height (DH) insulator provides additional vertical clearance above the PCB for improved wire routing and component spacing
- Tape-and-reel (TR) packaging supports automated pick-and-place SMT reflow processes for high-volume production
- Gold-plated contacts ensure low contact resistance and corrosion resistance across all 38 positions for reliable long-term signal integrity
Applications
The TSM-119-02-L-DH-A-K-TR is used in industrial control systems, embedded computing backplanes, and test and measurement instruments where 38 signal positions at 0.100" pitch must be accessed from the side of the PCB in a right-angle orientation. Its dual-height insulator accommodates wire harnesses and cable routing in dense assemblies, making it suitable for panel-mount enclosures and card-cage systems. The right-angle termination also makes it an ideal choice for stacked PCB configurations where vertical connector access is not possible.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What does the right-angle (L) and dual-height (DH) combination mean for TSM-119-02-L-DH-A-K-TR in a card-cage application?
On the TSM-119-02-L-DH-A-K-TR, the L (right-angle) termination orients the 38-position mating interface horizontally so it can be accessed from the PCB edge, while the DH (dual-height) insulator raises the body to provide extra clearance for wiring at 0.100" (2.54 mm) pitch. Together, these features make it well suited for card-cage and panel-mount systems where side access and wire management are critical.
How does the 0.100" pitch dual-row layout of TSM-119-02-L-DH-A-K-TR affect the total connector footprint length for 38 positions?
With 38 positions arranged in a dual-row configuration at 0.100" (2.54 mm) pitch, the TSM-119-02-L-DH-A-K-TR occupies a footprint length of approximately 47.5 mm (19 positions per row x 2.54 mm). This is roughly twice the length of an equivalent 0.050" pitch connector, making it appropriate for standard PCB grid layouts where finer pitch is not necessary.
Which production environments benefit most from the tape-and-reel packaging of TSM-119-02-L-DH-A-K-TR?
High-volume SMT production environments with automated pick-and-place equipment benefit most from the TR (tape-and-reel) packaging of TSM-119-02-L-DH-A-K-TR. The tape carrier maintains consistent orientation for the right-angle 38-position connector at 0.100" (2.54 mm) pitch, enabling reliable automated placement with minimal manual intervention on standard SMT reflow lines.
What current and voltage rating applies to TSM-119-02-L-DH-A-K-TR for typical signal and low-power uses?
SAMTEC TSM-series connectors at 0.100" (2.54 mm) pitch such as the TSM-119-02-L-DH-A-K-TR are typically rated for up to 3 A per contact and 250 V AC/DC, providing adequate capacity for digital signal buses, low-power analog interfaces, and instrumentation wiring across all 38 positions in industrial and embedded control systems.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”