TSM-119-01-L-DH-P-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-119-01-L-DH-P-TR is a 38-position, 0.100" pitch surface-mount terminal strip with double-height single-row configuration and tape-and-reel packaging for automated SMT assembly. Low-profile design with gold contact plating supports reliable board-edge signal distribution in industrial and computing platforms. Available in stock worldwide for immediate shipment.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 38
- Lifecycle
- ACTIVE
- Datasheet
- TSM-119-01-L-DH-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 38-position 0.100" pitch SMT terminal strip with double-height body for daughter-card clearance
- Low-insertion-force contacts with reliable gold plating minimize signal loss at each 0.100" pitch position
- Tape-and-reel (TR) format with pick-and-place compatible pockets for high-volume SMT production
Applications
The TSM-119-01-L-DH-P-TR suits embedded control boards, computing modules, and industrial instrumentation that require 38 surface-mount signal contacts at 0.100" pitch in a compact single-row footprint. Its double-height configuration provides board clearance needed for daughter-card or cable connections above the PCB. Tape-and-reel delivery enables efficient automated assembly in medium- to high-volume electronics production.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the TSM-119-01-L-DH-P-TR double-height configuration affect the stacking height in a daughter-card design?
The double-height (DH) configuration on the TSM-119-01-L-DH-P-TR extends the connector body to approximately 8.5 mm above the PCB surface, providing clearance for daughter-card PCBs or cable exits above the 38-position 0.100 inch pitch terminal strip. This allows system designers to stack two boards with adequate air gap for airflow and component clearance in compact embedded computing enclosures.
For a 38-contact SMT signal bus, why choose TSM-119-01-L-DH-P-TR over a through-hole alternative?
Choosing the TSM-119-01-L-DH-P-TR over through-hole alternatives eliminates the need to drill 38 plated through-holes in the PCB, reducing fabrication cost and allowing use of finer-pitch inner layers on multilayer boards. SMT mounting at 0.100 inch pitch also enables lower-profile assemblies with body height under 8.5 mm, compatible with automated reflow soldering for production volumes above 500 units per run.
Which reel quantity does TSM-128-03-S-DH-A-P-TR tape-and-reel packaging typically ship in, and how does that compare to TSM-119-01-L-DH-P-TR?
Both SAMTEC TSM series tape-and-reel connectors including TSM-119-01-L-DH-P-TR typically ship in reels of 500 pieces, providing continuous-feed compatibility with standard 8 mm or 12 mm pitch SMT carrier tape on automated pick-and-place machines. The 38-position TSM-119-01-L-DH-P-TR and 56-position TSM-128-03-S-DH-A-P-TR share the same TR packaging format, simplifying procurement planning across designs using multiple contact counts.
What applications benefit from using TSM-119-01-L-DH-P-TR in an industrial backplane design?
Industrial backplane and distributed I/O designs benefit from the TSM-119-01-L-DH-P-TR because its 38-position 0.100 inch pitch layout provides enough signal contacts for address, data, and control buses in modular PLC or motion-control architectures. The double-height body supports plug-in module cards up to 15 mm above the PCB, and gold-plated contacts maintain low contact resistance below 20 mΩ through hundreds of mating cycles in vibration-prone factory environments.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”