TSM-115-03-FM-DH-P-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-115-03-FM-DH-P-TR is a 30-position dual-row surface-mount terminal strip with 0.100-inch (2.54 mm) pitch, featuring friction-lock headers for secure mating. Rated at 3 A per pin, it ships in tape-and-reel packaging for high-volume SMT assembly.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 30
- Lifecycle
- ACTIVE
- Datasheet
- TSM-115-03-FM-DH-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TSM-115-03-FM-DH-P-TR?
- 30-position dual-row configuration at 0.100-inch (2.54 mm) pitch for industry-standard board-to-board connectivity
- Friction-lock (FM) header design prevents accidental disconnection under vibration or mechanical stress
- 3 A per pin current rating supporting both signal and power distribution in a single connector
- Tape-and-reel (TR) packaging compatible with automated pick-and-place SMT production lines
What is TSM-115-03-FM-DH-P-TR used for?
The TSM-115-03-FM-DH-P-TR is well-suited for industrial control panels, robotics, and power electronics designs requiring secure 30-position dual-row board-to-board connections at the widely compatible 2.54 mm pitch. Its friction-lock feature makes it particularly valuable in high-vibration environments such as motor drives, conveyor systems, and automotive test equipment where accidental disconnection must be prevented. The surface-mount termination and tape-and-reel format support efficient automated assembly in medium-to-high production volumes.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TSM-115-03-FM-DH-P-TR datasheet?
TSM-115-03-FM-DH-P-TR Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TSM-115-03-FM-DH-P-TR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the pin pitch and total position count of the TSM-115-03-FM-DH-P-TR?
The TSM-115-03-FM-DH-P-TR is a 30-position dual-row terminal strip with a 0.100-inch (2.54 mm) pitch, one of the most widely used pitches in electronics. This standard spacing ensures broad compatibility with mating connectors and simplifies board routing for both signal and low-power circuits.
How does the friction-lock feature of the TSM-115-03-FM-DH-P-TR protect against disconnection in vibrating machinery?
The FM (friction-lock) designation means the mating connector latches mechanically, requiring a deliberate pull force of several Newtons to disengage. In vibration-prone applications such as motor drives or conveyor controllers operating at 50 Hz to 200 Hz vibration frequencies, this design prevents the 30-pin assembly from backing out during normal operation.
What current per pin can the TSM-115-03-FM-DH-P-TR handle when used for mixed power and signal routing?
Each pin of the TSM-115-03-FM-DH-P-TR supports up to 3 A of continuous current, totaling a potential 90 A across all 30 pins at full load. In typical mixed designs, power pins carry 3 A while signal pins run at under 0.5 A, and operating voltage is commonly 3.3 V to 24 V depending on application.
Is the TSM-115-03-FM-DH-P-TR suitable for automated SMT assembly, and what reel format does it come in?
Yes, the -TR suffix confirms it comes in tape-and-reel packaging sized for standard SMT pick-and-place equipment. The surface-mount pads at 2.54 mm pitch conform to IPC-7351 land pattern guidelines, supporting reflow profiles peaking at 260°C and enabling reliable placement accuracy in high-volume runs.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector