TSM-115-03-FM-DH-A-K-TR SAMTEC Connector (Other) In Stock
The TSM-115-03-FM-DH-A-K-TR is a 30-position dual-row surface mount terminal strip from SAMTEC with a 0.100 inch (2.54 mm) pitch and a 3 mm post height. It features kinked contact tails for reliable SMT solder joints and is supplied in tape-and-reel format for automated pick-and-place assembly. Available in stock worldwide.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 30
- Lifecycle
- ACTIVE
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TSM-115-03-FM-DH-A-K-TR?
- 30-position dual-row terminal strip on a 0.100 inch (2.54 mm) pitch for standard industrial and embedded board interfaces
- 3 mm post height (option 03) provides compatible mating depth with standard 0.100 inch receptacle housings and wire-to-board assemblies
- Kinked (K) SMT tail creates a controlled solder standoff for improved joint quality and post-reflow optical inspection
- Tape-and-reel (TR) packaging supports automated pick-and-place processes on high-volume SMT production lines
What is TSM-115-03-FM-DH-A-K-TR used for?
The TSM-115-03-FM-DH-A-K-TR suits embedded computing modules, industrial control backplanes, and test-and-measurement instrumentation that require a 30-position 2.54 mm pitch SMT terminal strip with a 3 mm mating post. Its dual-row layout maximizes contact density while the kinked tail and tape-and-reel packaging streamline high-volume surface mount assembly in electronics manufacturing.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TSM-115-03-FM-DH-A-K-TR datasheet?
TSM-115-03-FM-DH-A-K-TR Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TSM-115-03-FM-DH-A-K-TR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What distinguishes the TSM-115-03-FM-DH-A-K-TR from the TSM-115-01-F-DH-A-K-TR in terms of post height?
The '03' in the TSM-115-03-FM-DH-A-K-TR specifies a 3 mm post height above the PCB surface, compared to the shorter post of the '-01' variant. The taller 3 mm post depth is compatible with deeper receptacle housings and wire-to-board connectors, giving designers more flexibility in connector pairing for the 30-position 2.54 mm pitch interface.
How does the kinked tail on the TSM-115-03-FM-DH-A-K-TR improve SMT solder reliability?
The kinked (K) tail lifts the connector body slightly above the PCB pads during reflow soldering, creating a controlled standoff across all 30 positions. This allows flux vapor to escape and ensures solder wets the full pad contact area, improving joint strength and making the 2.54 mm pitch solder joints accessible for automated optical inspection.
For a 30-pin dual-row 2.54 mm pitch SMT interface, when would a designer choose the FM contact finish option?
The FM (flash gold over nickel) contact finish provides a thin gold layer over nickel barrier, offering moderate oxidation resistance at a lower cost than full gold plating. Designers choose FM finish for the TSM-115-03-FM-DH-A-K-TR when environmental exposure is moderate and the 30-position connector will undergo fewer than several hundred mating cycles in industrial or instrumentation applications.
Is the TSM-115-03-FM-DH-A-K-TR suitable for high-volume automated assembly, and how is it packaged for production?
Yes, the TR suffix indicates tape-and-reel packaging, making the TSM-115-03-FM-DH-A-K-TR fully compatible with automated pick-and-place equipment. The reel format supports uninterrupted high-volume SMT line runs, and the kinked K tail simplifies solder inspection for all 30 positions across the 0.100 inch dual-row footprint.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector