TSM-115-01-H-DH-P-TR SAMTEC Connector (Other) In Stock
The TSM-115-01-H-DH-P-TR is a 30-position, 0.100 inch pitch surface mount terminal strip from SAMTEC in a single-row SMT configuration with high-profile contact height. It is suited for board interconnects and wire-to-board terminations in industrial and consumer electronics designs. Available from authorized distributors with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 30
- Lifecycle
- ACTIVE
- Datasheet
- TSM-115-01-H-DH-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 30-position single-row surface mount terminal strip at 0.100 inch (2.54 mm) standard pitch for universal PCB grid compatibility
- High-profile (H suffix) contact configuration provides additional clearance above the PCB for wire termination or mating connector engagement
- Tape and reel (TR) packaging optimized for automated high-volume pick-and-place SMT assembly
- Single-row layout yields a compact linear footprint of approximately 75 mm for 30 positions at 2.54 mm pitch
Applications
The TSM-115-01-H-DH-P-TR is used in industrial control boards, consumer electronics motherboards, and embedded systems where a 30-position, 0.100 inch pitch surface mount terminal strip with a higher profile is required. Its SMT design and tape-and-reel format enable high-volume automated assembly, and the high-profile height accommodates thicker wire gauge terminations or taller mating connector housings. The 30-position single-row configuration is well matched to applications like 24-bit data buses with auxiliary control lines or modular sensor interfaces.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What does the 'H' designator in TSM-115-01-H-DH-P-TR indicate about the connector's physical dimensions?
The 'H' suffix in TSM-115-01-H-DH-P-TR designates a high-profile contact height variant. This taller contact above the PCB surface provides additional clearance — typically 8 mm or more above the board — which accommodates thicker wire gauge terminations, larger mating housings, or applications where a standard-profile contact height of around 4–5 mm would be insufficient for the mating system.
How many signal lines can the TSM-115-01-H-DH-P-TR accommodate, and over what board length?
The TSM-115-01-H-DH-P-TR provides 30 positions in a single-row layout at 0.100 inch (2.54 mm) pitch, spanning approximately 75 mm of board length for the 30-position array. This supports 30 signal or power lines, suitable for interfaces such as a 24-bit wide data bus plus 6 control signals, or a 30-channel analog input strip for data acquisition boards.
Is the TSM-115-01-H-DH-P-TR suited for fully automated SMT production lines?
Yes, the TSM-115-01-H-DH-P-TR is packaged in tape and reel (TR) format, making it directly compatible with automated pick-and-place equipment and standard SMT reflow soldering processes at peak temperatures up to 260°C per J-STD-020. No through-hole drilling is needed for 30 positions, reducing PCB fabrication time and cost compared to equivalent through-hole terminal strips.
For a 30-channel sensor interface board, why would a designer choose TSM-115-01-H-DH-P-TR over a lower-profile SMT strip?
When the mating wire harness or connector housing is taller than 5 mm, the high-profile TSM-115-01-H-DH-P-TR provides the necessary contact height clearance to engage the mating component without mechanical interference. For 30-channel sensor interface boards where individual wires are terminated per pin or where a taller mating connector body exceeds 6 mm in height, the H-profile version ensures reliable electrical and mechanical engagement that a standard 4 mm profile strip cannot achieve.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”