TSM-114-04-T-DH-P-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-114-04-T-DH-P-TR is a 28-position, 0.100-inch pitch dual-row surface mount terminal strip with tall (T) profile and tin-plated contacts, packaged in tape-and-reel for automated SMT assembly. Each contact is rated at 1 A and 125 V AC/DC, supporting multi-channel signal routing across a wide industrial temperature range. Available through authorized distributors with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 28
- Lifecycle
- ACTIVE
- Datasheet
- TSM-114-04-T-DH-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 28 positions (14 per row) on 0.100" (2.54 mm) pitch dual-row layout providing cost-effective 28-channel SMT interconnects
- Tall (T) profile height accommodates thicker PCB stackups and provides additional connector body clearance for routing-intensive board designs
- Tin (P) plated contacts offer a cost-optimized surface finish suitable for high-volume commercial and industrial applications with moderate mating cycle requirements
- Tape-and-reel (TR) packaging ensures compatibility with automated pick-and-place machines for efficient high-volume SMT production
- Rated 1 A per contact and 125 V AC/DC, covering a broad range of signal, control, and low-power interconnect applications
Applications
The TSM-114-04-T-DH-P-TR is a cost-effective choice for consumer electronics, industrial control panels, and telecommunications equipment that require 28-channel dual-row SMT signal connectors with a tall profile for clearance above densely populated PCB areas. Its tin-plated contacts reduce material cost compared to gold-plated variants, making it suitable for high-volume commercial applications where mating cycles are limited. The tape-and-reel format integrates seamlessly into automated SMT assembly lines used in standard electronics manufacturing.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the tall (T) profile of TSM-114-04-T-DH-P-TR benefit PCB designs with routing constraints beneath the connector?
The tall (T) height variant of the TSM-114-04-T-DH-P-TR provides additional clearance between the PCB surface and the connector body, allowing signal traces and power planes to route beneath the 28-position connector footprint without design rule violations. This is particularly useful in densely populated PCBs where routing channels under the connector are required to maintain a clean 2.54 mm pitch layout without via stitching complications.
What current and voltage rating does each contact of the TSM-114-04-T-DH-P-TR support?
Each of the 28 contacts in the TSM-114-04-T-DH-P-TR is rated for 1 A of continuous current and 125 V AC/DC, accommodating standard logic signals at 1.8 V, 3.3 V, and 5 V as well as 12 V control lines. The connector operates across an industrial temperature range of -55 °C to +125 °C, making it appropriate for both commercial and light industrial signal routing applications.
Why is tin (P) plating specified on TSM-114-04-T-DH-P-TR and when is it the right choice over gold?
Tin (P) plating on TSM-114-04-T-DH-P-TR contacts reduces connector cost compared to gold-finished alternatives, making it optimal for high-volume commercial and consumer applications where the connector experiences fewer than 100 mating cycles over its service life. For applications requiring more than 500 mating cycles or operating in humid or corrosive environments, gold-plated TSM variants with contact resistance consistently below 20 mΩ are recommended instead.
Which industrial and consumer applications are best served by the TSM-114-04-T-DH-P-TR 28-pin terminal strip?
The TSM-114-04-T-DH-P-TR is commonly used in industrial PLC I/O modules, consumer home automation controllers, and telecommunications expansion boards where a 28-position dual-row connector at 0.100-inch pitch provides sufficient channel count at low cost. Its tin-plated contacts and tall profile suit PCB assemblies in HVAC controllers, smart meter gateways, and building automation systems where board clearances of 5 mm to 10 mm are typical and assembly volumes exceed 10,000 units per year.
How does the tape-and-reel packaging of TSM-114-04-T-DH-P-TR support automated SMT manufacturing?
The tape-and-reel (TR) packaging of TSM-114-04-T-DH-P-TR feeds directly into standard pick-and-place machines equipped with 24 mm or 32 mm feeder tracks, enabling placement at rates of 5,000 to 10,000 components per hour. This eliminates manual component handling, reduces placement errors on the 2.54 mm pitch footprint, and is compatible with reflow soldering profiles peaking at 260 °C for consistent high-volume SMT production.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”