TSM-114-03-TM-DH-P-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-114-03-TM-DH-P-TR is a 28-position dual-row surface-mount terminal strip with 0.100" (2.54 mm) pitch, double-height shroud, TM tail, and tape-and-reel packaging designed for polarized board-to-board SMT signal distribution. From $1.90, in stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 28
- Lifecycle
- ACTIVE
- Datasheet
- TSM-114-03-TM-DH-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 28-position dual-row SMT terminal strip with 0.100" (2.54 mm) standard pitch for broad compatibility with existing PCB grid layouts
- Double-height (DH) shroud provides mechanical polarization and contact protection to prevent mis-mating across all 28 pins
- TM tail configuration enables surface-mount reflow soldering without through-hole drilling, simplifying PCB fabrication
- Tape-and-reel (TR) packaging supports fully automated pick-and-place SMT assembly for high-volume production
Applications
The TSM-114-03-TM-DH-P-TR is used in embedded computing systems, industrial I/O modules, and consumer electronics where a 28-position, 2.54 mm pitch dual-row SMT shrouded terminal strip provides polarized, mechanically protected board-to-board or cable-to-board signal connections. Its double-height shroud and standard 2.54 mm pitch make it compatible with a wide selection of mating connectors, simplifying system design for I/O expansion cards, sensor interface boards, and relay control modules. Tape-and-reel packaging enables cost-effective high-volume automated assembly in manufacturing environments requiring consistent placement accuracy.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the pin count and pitch of the TSM-114-03-TM-DH-P-TR, and how does the dual-row layout benefit board layout?
The TSM-114-03-TM-DH-P-TR has 28 positions in a dual-row configuration at 0.100" (2.54 mm) pitch. The dual-row layout places 14 pins per row, halving the connector's board length compared to a single-row 28-pin strip at the same pitch, which saves PCB real estate while maintaining the standard 2.54 mm grid spacing compatible with most mating connectors.
How does the double-height shroud on the TSM-114-03-TM-DH-P-TR protect the connector in field-service or frequent mating scenarios?
The double-height (DH) shroud extends the plastic housing walls taller than a standard shroud, fully enclosing the 28 signal pins and providing a guided entry path for the mating connector. This prevents off-center insertions, protects pins from mechanical damage during handling, and enforces polarization so the mating connector can only be inserted in the correct orientation, reducing field-service errors.
Can the TSM-114-03-TM-DH-P-TR be used with automated SMT assembly equipment, and what packaging does it come in?
Yes, the TR suffix indicates tape-and-reel packaging, which is fully compatible with standard automated pick-and-place SMT assembly equipment. Each connector is seated in a carrier tape wound on a reel, allowing assembly machines to place the 28-pin connector accurately on the PCB pad pattern before reflow soldering, making it suitable for high-volume production runs with consistent placement quality.
For which end applications is the TSM-114-03-TM-DH-P-TR preferred over a wire-to-board screw terminal?
The TSM-114-03-TM-DH-P-TR is preferred over screw terminals in high-density PCB-to-PCB or PCB-to-cable applications where space is limited, assembly speed matters, and polarization is required. With 28 positions at 2.54 mm pitch in a compact dual-row SMT package, it suits embedded controller boards, sensor fusion modules, I/O expansion cards, and industrial communication interfaces where a screw terminal's large footprint and manual wiring are impractical.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”