TSM-114-03-SS-DH-P-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-114-03-SS-DH-P-TR is a 28-position surface-mount terminal strip with 0.100" (2.54 mm) pitch in a double-height vertical configuration. It features single-row layout, tape-and-reel packaging for automated assembly, and gold-plated contacts for reliable, low-resistance PCB interconnections.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 28
- Lifecycle
- ACTIVE
- Datasheet
- TSM-114-03-SS-DH-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 28-position single-row layout at 0.100" (2.54 mm) pitch in a double-height (DH) vertical SMT package
- Double-height insulator body providing increased board-to-board stacking clearance over standard-height TSM variants
- Tape-and-reel (TR) packaging for automated pick-and-place SMT assembly in high-volume production
- Gold-plated contacts ensuring consistent, low-resistance signal connections across multiple mating cycles
Applications
The TSM-114-03-SS-DH-P-TR is well-suited for board-to-board and board-to-cable SMT interconnect applications requiring 28 signal or power connections at the standard 0.100" pitch. It finds use in embedded computing expansion cards, industrial I/O interface boards, and test fixture assemblies where a double-height vertical connector accommodates taller mating components or increased clearance requirements. The tape-and-reel packaging supports efficient automated assembly in production environments.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What position count and pitch does the TSM-114-03-SS-DH-P-TR offer, and what does the DH designation indicate?
The TSM-114-03-SS-DH-P-TR provides 28 contact positions at a 0.100" (2.54 mm) pitch. The DH (double-height) designation means the connector body is taller than a standard single-height TSM variant, providing additional board-to-board clearance in stacking configurations where nearby components or taller mating connectors would otherwise cause mechanical interference.
How does the single-row layout of the TSM-114-03-SS-DH-P-TR compare to dual-row TSM variants in PCB space usage?
The single-row (SS) layout of the TSM-114-03-SS-DH-P-TR arranges all 28 contacts in a single line at 0.100" (2.54 mm) spacing, resulting in a narrower connector footprint along one PCB axis compared to dual-row variants. This is advantageous when PCB width is constrained and contacts must be distributed along a longer linear run, such as along the edge of an expansion card or I/O interface module.
For which embedded and industrial applications is the TSM-114-03-SS-DH-P-TR particularly well-matched?
The TSM-114-03-SS-DH-P-TR is well-matched for industrial PLC I/O expansion interfaces, embedded microcontroller development boards, and instrumentation modules where 28 signal connections at the common 2.54 mm pitch are needed in a single SMT connector. Its double-height body suits designs where the baseboard and mezzanine card have components near the connector that would be clearance-limited with a standard-height TSM body.
What sourcing advantage does the tape-and-reel format provide for the TSM-114-03-SS-DH-P-TR in volume production?
The tape-and-reel format of the TSM-114-03-SS-DH-P-TR allows this 28-position, 2.54 mm pitch SMT connector to be fed directly into automated pick-and-place machines, eliminating manual placement and reducing per-unit assembly cost in high-volume runs. Procurement of reel quantities through authorized SAMTEC distributors also simplifies inventory management and guarantees consistent component orientation, reducing placement defect rates compared to bulk-packaged alternatives.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”