TSM-112-05-TM-SH SAMTEC Connector (Other) In Stock
SAMTEC TSM-112-05-TM-SH is a 12-position, single-row, 0.100" (2.54 mm) pitch surface mount vertical terminal strip providing reliable multi-signal PCB interconnect in a compact package. Designed for signal routing in industrial controls, embedded computing, and consumer electronics boards. Available from authorized distributors with fast worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 12
- Lifecycle
- ACTIVE
- Datasheet
- TSM-112-05-TM-SH Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 12-position single-row layout at 0.100 inch (2.54 mm) pitch matches standard PCB grid for broad compatibility with mating pin headers and jumper connectors
- Surface mount vertical (SH) termination supports automated pick-and-place assembly and standard reflow soldering for high-volume manufacturing
- Low-profile vertical orientation enables use in space-constrained enclosures where component height above the PCB must be minimized
- Wide availability in standard and tape-and-reel packaging options simplifies procurement for both prototype and production quantities
Applications
The TSM-112-05-TM-SH is used as a general-purpose signal header in industrial PLC modules, embedded microcontroller boards, and consumer electronics that require 12 discrete wire-to-board or board-to-board connections at the standard 0.100 inch pitch. Its single-row vertical layout suits panel-mount interface boards and sensor modules where a clean row of 12 signal pins is needed for ribbon cable or harness termination. The SMT footprint also makes it a practical choice for production-optimized designs that benefit from fully automated assembly without through-hole drilling.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many positions does TSM-112-05-TM-SH provide, and what pitch does it use?
The TSM-112-05-TM-SH offers 12 positions in a single-row configuration at 0.100 inch (2.54 mm) pitch, which is the universally adopted standard for PCB headers. This makes it directly compatible with ribbon cables, IDC connectors, and most jumper wire assemblies used in embedded development and industrial wiring harnesses.
Does TSM-112-05-TM-SH support automated SMT assembly, and what type of soldering process does it use?
Yes, the TSM-112-05-TM-SH is a surface mount component designed for automated pick-and-place assembly followed by standard reflow soldering. Its SMT termination style eliminates the need for through-hole PCB drilling, saving fabrication time and cost while ensuring consistent solder joint quality across all 12 positions in high-volume production runs.
Which embedded controller or sensor applications commonly use TSM-112-05-TM-SH as an I/O header?
Common applications include Arduino-style development boards requiring 12-pin expansion headers at 0.100 inch pitch, industrial PLC digital I/O modules with up to 12 input or output channels, and sensor fusion boards that aggregate data from multiple sensors over a 12-wire flat cable. Its standard pitch also suits low-speed serial protocols such as SPI, I2C, and UART across 12 signal lines.
How does TSM-112-05-TM-SH compare to a dual-row 6-position connector for the same number of signals?
The TSM-112-05-TM-SH single-row design occupies a board length of approximately 1.2 inches at 0.100 inch pitch for 12 positions, while a dual-row 6-position alternative would be half the length but twice as wide. Single-row connectors are preferable when board width is constrained or when board edge placement is required, while dual-row connectors suit applications needing a shorter connector length.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”