TSM-108-04-TM-DH-A-P-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-108-04-TM-DH-A-P-TR is a 16-position dual-row surface mount terminal strip on a 2.54 mm (0.100 inch) pitch with a tall-mount TM profile and double-row DH layout. It features palladium-plated square-pin male contacts and tape and reel packaging for automated SMT placement. Available from stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 16
- Lifecycle
- ACTIVE
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TSM-108-04-TM-DH-A-P-TR?
- 16-position dual-row configuration on 2.54 mm (0.100 inch) pitch accommodates 8 pins per row for high-density board-to-board signal routing
- Tall-mount (TM) profile provides additional standoff height for boards requiring greater component clearance in stacked assemblies
- Palladium-plated square-pin male contacts deliver low contact resistance below 20 milliohms and extended corrosion resistance over rated mating cycles
- Tape and reel (TR) packaging enables automated pick-and-place SMT assembly for volume production without manual handling
What is TSM-108-04-TM-DH-A-P-TR used for?
TSM-108-04-TM-DH-A-P-TR is used in industrial backplane systems, embedded controller boards, and development platforms where a 16-position dual-row header on a standard 0.100 inch pitch must accommodate taller mating connectors or provide component clearance in stacked configurations. The tall-mount height suits applications with through-hole components or heat sinks on the mating board requiring additional vertical clearance. Its palladium-plated contacts support reliable signal integrity in repeated plug-and-play or field-replaceable module connections.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TSM-108-04-TM-DH-A-P-TR datasheet?
TSM-108-04-TM-DH-A-P-TR Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TSM-108-04-TM-DH-A-P-TR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the pitch and dual-row layout of TSM-108-04-TM-DH-A-P-TR?
TSM-108-04-TM-DH-A-P-TR has a 2.54 mm (0.100 inch) pitch with 8 positions per row in a dual-row (DH) configuration, yielding 16 total positions. This standard pitch is directly compatible with industry-standard 0.100 inch mating headers and IDC ribbon cable sockets.
How does the tall-mount (TM) profile of TSM-108-04-TM-DH-A-P-TR differ from a standard-height variant?
The tall-mount profile extends the connector body height above the PCB surface by approximately 2 mm to 4 mm compared to standard TSM heights, providing clearance for taller components, heat sinks, or connectors on the mating board in a stacked assembly. This suits development boards and industrial control cards where component density creates height conflicts.
For a field-replaceable module in an industrial controller, how does TSM-108-04-TM-DH-A-P-TR perform over repeated insertions?
TSM-108-04-TM-DH-A-P-TR uses palladium-plated contacts rated for a minimum of 30 mating cycles while maintaining contact resistance below 20 milliohms. This makes it appropriate for field-replaceable module applications in industrial controllers where boards are periodically swapped during maintenance without degrading signal integrity.
Can TSM-108-04-TM-DH-A-P-TR be reflowed with standard SMT lead-free soldering profiles?
Yes. As a surface mount connector packaged on tape and reel (TR), TSM-108-04-TM-DH-A-P-TR is compatible with lead-free reflow soldering at peak temperatures up to 260°C per IPC/JEDEC J-STD-020, enabling fully automated assembly on standard SMT production lines without manual soldering.
Related Guides
How to Choose an Indicator LED: TLMG1100-GS08 Selection Guide
Select TLMG1100-GS08 and evaluate four indicator LED candidates through optical, electrical, footprint, and sourcing checks.
Nov 5, 2026
150141YS73100 Yellow LED Indicator Design and Validation Guide
Design and validate a 150141YS73100 yellow indicator with current-limit calculations, GPIO checks, PWM control, and enclosure visibility tests.
Nov 5, 2026
How to Choose an LMG1020YFFR GaN Gate Driver: Selection and Sourcing Guide
Compare LMG1020 and LMG1210 circuit roles, gate-drive requirements, ordering codes, and sourcing evidence before approving a GaN driver.
Nov 4, 2026
150141YS73100 LED Selection and Procurement Guide
Evaluate 150141YS73100 and four related LEDs using optical, electrical, mechanical, and sourcing checks before production approval.
Nov 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector