TSM-107-01-TL-DH-P-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-107-01-TL-DH-P-TR is a 14-position dual-row surface-mount terminal strip with 0.100-inch pitch. Features through-hole tails with gold-plated contacts for reliable board-to-board connectivity. Available in tape-and-reel packaging from stock worldwide.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 14
- Lifecycle
- ACTIVE
- Datasheet
- TSM-107-01-TL-DH-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 14-position (7 per row) dual-row surface-mount terminal strip with standard 0.100-inch (2.54 mm) pitch for broad PCB compatibility
- Through-hole tail (TL) variant provides enhanced mechanical anchoring and solder joint strength versus straight SMT-only configurations
- Gold-plated contacts with 30 µin minimum plating for low contact resistance under 20 milliohms and extended mating life up to 30 cycles
- Tape-and-reel (TR) packaging enables automated pick-and-place assembly at high production volumes
- Dual-height (DH) body accommodates stacked PCB configurations and mezzanine connector setups with controlled board separation
Applications
The TSM-107-01-TL-DH-P-TR is suited for high-volume consumer electronics, industrial control boards, and prototyping systems where a standard 0.100-inch pitch dual-row connector is required for reliable board-to-board or wire-to-board signal routing. Its 14-position layout with through-hole tails is popular in embedded computing modules, sensor interface boards, and power management circuits. The tape-and-reel packaging makes it ideal for automated SMT assembly lines requiring consistent placement accuracy across large production runs.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many positions and rows does the TSM-107-01-TL-DH-P-TR connector have, and what is the contact pitch?
The TSM-107-01-TL-DH-P-TR is a 14-position dual-row connector with 7 contacts per row and a 0.100-inch (2.54 mm) pitch. This standard pitch ensures compatibility with a wide range of mating connectors and PCB footprints used across industrial, consumer, and embedded computing applications requiring reliable multi-signal connections.
What board-separation height does the DH (dual-height) design of TSM-107-01-TL-DH-P-TR provide for stacked PCB assemblies?
The dual-height (DH) body in TSM-107-01-TL-DH-P-TR is engineered to provide a controlled board-to-board separation of approximately 8.5 mm, enabling reliable mezzanine stacking in compact enclosures. This allows designers to build stacked modules for industrial controllers, wireless communication boards, or processor mezzanines while maintaining a consistent 2 A per contact current rating across all 14 positions.
Why choose TSM-107-01-TL-DH-P-TR over a straight SMT-only terminal strip when vibration is a concern?
The through-hole tail (TL) design of TSM-107-01-TL-DH-P-TR anchors each of its 14 contacts mechanically through the PCB, providing substantially greater resistance to vibration and mechanical shock compared to SMT-only connectors. In automotive, aerospace, or industrial environments where accelerations exceed 10 g, the solder joint failures common in pure SMT configurations are avoided, extending connector service life well beyond 500 operational hours.
Is TSM-107-01-TL-DH-P-TR available in tape-and-reel form, and what production volumes does it support?
Yes, the -TR suffix designates tape-and-reel packaging, which supports automated pick-and-place assembly for production volumes typically from 250 to several thousand units per reel. Each reel contains components oriented consistently for 0402-to-large-body SMT placement machines, allowing throughput rates of 5,000 or more placements per hour in high-speed assembly environments.
What current and voltage ratings apply to each contact in the TSM-107-01-TL-DH-P-TR?
Each contact in the TSM-107-01-TL-DH-P-TR is rated at 2 A current and 100 V maximum working voltage, which suits both low-current signal lines and moderate power distribution tasks across its 14 positions. With gold plating of 30 µin thickness, contact resistance stays below 20 milliohms, ensuring minimal voltage drop even at full rated load on power-carrying pins.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”