TSM-105-04-TM-DH-A-P-TR SAMTEC Connector (Other) In Stock
Samtec TSM-105-04-TM-DH-A-P-TR is a 10-position dual-row 2.54 mm pitch surface-mount terminal strip rated at 3 A per pin. Tape-and-reel packaging supports automated pick-and-place. Available from stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 10
- Lifecycle
- ACTIVE
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 10-position dual-row layout on 2.54 mm (0.100 inch) pitch for high-density board-to-wire connections
- Surface-mount termination with tape-and-reel packaging for automated SMT assembly
- 3 A per-pin current rating with gold-flash or select gold plating options for reliable signal integrity
- Compatible with Samtec TSW mating receptacle family for a secure, low-profile mated stack height
Applications
The TSM-105-04-TM-DH-A-P-TR is well suited for general-purpose PCB-to-wire breakout applications in industrial control panels, test fixtures, and prototyping platforms where a 2.54 mm pitch grid simplifies hand-wiring and standard 0.1-inch jumper harnesses. Its surface-mount termination style enables reflow-soldering in high-volume production lines, while the dual-row layout reduces connector footprint compared to single-row strips of equivalent pin count. The tape-and-reel format further supports pick-and-place automation in compact consumer and embedded systems.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What pitch and current rating does TSM-105-04-TM-DH-A-P-TR support per pin?
The connector uses a 2.54 mm (0.100 inch) pitch and is rated at 3 A per pin, making it suitable for logic-level signal distribution and moderate power delivery on compact PCB designs.
How many positions does TSM-105-04-TM-DH-A-P-TR have and how are they arranged?
It provides 10 positions arranged in a dual-row configuration with 5 pins per row, allowing two parallel signal buses to be routed through a single compact connector footprint measuring approximately 12.7 mm in length.
Can TSM-105-04-TM-DH-A-P-TR be used with standard 0.1-inch jumper wires in a prototyping scenario?
Yes, the 2.54 mm pitch is compatible with standard 0.1-inch female-crimp housings and Dupont-style jumper wires, so engineers can quickly prototype with off-the-shelf harnesses during development before transitioning to custom cables.
What mating connector from Samtec is recommended to pair with TSM-105-04-TM-DH-A-P-TR?
Samtec's TSW dual-row receptacle series mates directly with TSM-series strips; a TSW-105-xx-x-D receptacle provides 10 matched positions and a typical mated height of about 8.5 mm above the PCB surface.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”