TSM-105-04-G-SH-A SAMTEC Connector (Other) In Stock
TSM-105-04-G-SH-A is a SAMTEC 5-position single-row, 2.54 mm (0.100") pitch surface-mount terminal strip connector with a horizontal mating orientation and gold-plated contacts. It supports up to 3 A per pin and withstands 250 VAC, suitable for PCB-to-wire signal and power connections. Available RoHS-compliant with worldwide distribution.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 5
- Lifecycle
- ACTIVE
- Datasheet
- TSM-105-04-G-SH-A Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TSM-105-04-G-SH-A?
- 5-position single-row SMT terminal strip on 2.54 mm (0.100") pitch for compact board-edge connections
- Gold-plated contacts rated at 3 A per pin and 250 VAC for reliable signal and low-power supply connections
- Horizontal mating orientation enables right-angle cable routing in space-constrained enclosures
- RoHS-compliant with SAMTEC's SH shrouded housing for keying and strain relief in high-vibration environments
What is TSM-105-04-G-SH-A used for?
TSM-105-04-G-SH-A is used in industrial control boards, test and measurement instruments, and embedded systems where a compact 5-pin SMT connector is needed for cable harness termination on a 2.54 mm grid. Its shrouded housing prevents mis-mating in field-service scenarios, making it suitable for power distribution rails and I/O signal lines in automation equipment and data acquisition modules. The horizontal exit direction allows flat-flex or ribbon cable routing parallel to the PCB surface within shallow enclosures.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TSM-105-04-G-SH-A datasheet?
TSM-105-04-G-SH-A Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TSM-105-04-G-SH-A?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many positions does the TSM-105-04-G-SH-A have, and what is its pin pitch?
The TSM-105-04-G-SH-A is a 5-position single-row connector on a 2.54 mm (0.100 inch) pitch. This standard pitch makes it compatible with 2.54 mm ribbon cable assemblies and allows placement on a standard 100 mil PCB grid without custom footprint design.
What current and voltage rating should a designer verify before using TSM-105-04-G-SH-A in a power distribution circuit?
Each pin in the TSM-105-04-G-SH-A is rated at 3 A and the connector withstands 250 VAC between adjacent contacts. For a 5-pin connector handling mixed signal and power lines, designers should ensure that the total current through any single pin does not exceed 3 A and that creepage distances in the 2.54 mm pitch housing meet IEC 60950 requirements for 250 V applications.
In which assembly processes can TSM-105-04-G-SH-A be reliably soldered?
TSM-105-04-G-SH-A is a surface-mount terminal strip compatible with standard SMT reflow soldering at peak temperatures up to 260°C per J-STD-020. The SMT lead style eliminates through-hole drilling, reducing PCB fabrication cost and enabling placement on single-sided assemblies where wave soldering is unavailable.
How does the SH shroud on TSM-105-04-G-SH-A reduce field service errors compared to unshrouded headers?
The SH shroud provides polarization keying that physically prevents a mating plug from being inserted backwards or offset by 1 pitch, a common cause of equipment damage during field cable swaps. The shroud also provides 2–3 mm of cable strain relief, reducing the risk of solder joint fatigue on the 5-position SMT pads when cables are tugged during maintenance.
Related Guides
How to Choose an Indicator LED: TLMG1100-GS08 Selection Guide
Select TLMG1100-GS08 and evaluate four indicator LED candidates through optical, electrical, footprint, and sourcing checks.
Nov 5, 2026
150141YS73100 Yellow LED Indicator Design and Validation Guide
Design and validate a 150141YS73100 yellow indicator with current-limit calculations, GPIO checks, PWM control, and enclosure visibility tests.
Nov 5, 2026
How to Choose an LMG1020YFFR GaN Gate Driver: Selection and Sourcing Guide
Compare LMG1020 and LMG1210 circuit roles, gate-drive requirements, ordering codes, and sourcing evidence before approving a GaN driver.
Nov 4, 2026
150141YS73100 LED Selection and Procurement Guide
Evaluate 150141YS73100 and four related LEDs using optical, electrical, mechanical, and sourcing checks before production approval.
Nov 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector