TSM-104-02-T-DH-P-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-104-02-T-DH-P-TR is an 8-position dual-row surface-mount terminal strip with 2.54 mm (0.100 inch) pitch, matte tin contacts with nickel barrier, and male square pins for PCB-to-PCB or wire-to-board interconnect in consumer and industrial electronics.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- TSM-104-02-T-DH-P-TR Datasheet PDF
- Category
- Connector
- Price
- From $0.5362(MOQ 175)
- Temp Range
- -55.0°C to 105.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TSM-104-02-T-DH-P-TR?
- 8-position dual-row terminal strip with 2.54 mm (0.100 inch) pitch for universal breadboard and PCB compatibility
- Matte tin contact finish with nickel barrier providing low contact resistance and corrosion resistance over thousands of mating cycles
- Surface-mount termination style enabling reflow assembly without through-hole drilling
- Male square-pin contacts compatible with a wide range of female socket and IDC connectors
What is TSM-104-02-T-DH-P-TR used for?
The SAMTEC TSM-104-02-T-DH-P-TR is used in development boards, evaluation modules, and production PCBs where a compact 8-pin dual-row 0.100-inch-pitch connector is needed for signal routing or daughter-card attachment. Its surface-mount footprint simplifies assembly on both prototype and high-volume production lines. Engineers also deploy it in test fixtures, FPGA breakout boards, and modular industrial I/O panels requiring reliable multi-pin header connections at standard 2.54 mm spacing.
What are the specifications of TSM-104-02-T-DH-P-TR?
| YTEOL | 9.1 |
| Body Breadth | 0.24inch |
| Body Depth | 0.41inch |
| Body Length | 0.4inch |
| Connector Type | BOARD CONNECTOR |
| Contact Finish Mating | MATTE TIN |
| Contact Finish Termination | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Contact Gender | MALE |
| Contact Pattern | RECTANGULAR |
| Contact Style | SQ PIN-SKT |
| DIN Conformance | NO |
| Filter Feature | NO |
| IEC Conformance | NO |
| Insulator Color | BLACK |
| JESD-609 Code | e3 |
| MIL Conformance | NO |
| Mating Contact Pitch | 0.1inch |
| Mating Contact Row Spacing | 0.1inch |
| Mixed Contacts | NO |
| Mounting Style | RIGHT ANGLE |
| Mounting Type | BOARD |
| Number Of Connectors | ONE |
| Number Of PCB Rows | 2 |
| Number of Rows Loaded | 2 |
| Option | GENERAL PURPOSE |
| PCB Contact Pattern | RECTANGULAR |
| PCB Contact Row Spacing | 4.191mm |
| Rated Current (Signal) | 7A |
| Terminal Pitch | 2.54mm |
| Termination Type | SURFACE MOUNT |
| Total Number of Contacts | 8 |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8536.69.40.40 |
Where can I find the TSM-104-02-T-DH-P-TR datasheet?
TSM-104-02-T-DH-P-TR Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TSM-104-02-T-DH-P-TR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the contact pitch and pin count of the SAMTEC TSM-104-02-T-DH-P-TR, and which mating connectors are compatible?
The TSM-104-02-T-DH-P-TR has a 2.54 mm (0.100 inch) contact pitch with 8 positions arranged in a dual-row (4 × 2) configuration. This standard pitch is compatible with a wide range of female socket connectors, IDC ribbon cable connectors, and 0.100-inch-pitch jumper housings from SAMTEC and other manufacturers. The 2.54 mm grid makes it directly interchangeable with breadboard-standard headers, simplifying prototyping and test fixture integration.
How does the matte tin finish with nickel barrier on the TSM-104-02-T-DH-P-TR affect long-term contact reliability?
The matte tin (Sn) contact finish with an underlying nickel (Ni) barrier provides two key reliability benefits: the nickel layer prevents tin diffusion into the copper contact base, maintaining contact resistance below 30 mΩ over extended use, while the matte tin surface resists fretting corrosion from vibration-induced micro-motion. This dual-layer finish supports rated mating cycle counts of 30 or more insertions while remaining compatible with lead-free solder processes at up to 260°C peak reflow temperatures.
What PCB footprint dimensions does the TSM-104-02-T-DH-P-TR require, and how does the surface-mount style affect placement?
The connector body measures 0.40 inch long × 0.41 inch deep × 0.24 inch wide (approximately 10.2 mm × 10.4 mm × 6.1 mm). The surface-mount termination style means contacts land on the PCB surface rather than passing through drilled holes, allowing finer PCB stackup control and enabling placement on both sides of the board. Paste-in-hole or standard SMT reflow processes both apply, and the -TR suffix indicates the part ships in tape-and-reel format for automated pick-and-place assembly.
When should a designer select the TSM-104-02-T-DH-P-TR over a through-hole dual-row header for the same 8-pin connection?
Designers should prefer the TSM-104-02-T-DH-P-TR when the PCB requires full SMT assembly without through-hole drilling, which reduces board fabrication cost on thin or multi-layer PCBs where via-in-pad is restricted. The surface-mount style also yields lower profile height than a through-hole header with long tails, saving up to 3 mm of vertical clearance in height-constrained enclosures. Through-hole headers remain preferable only when mechanical pull-out strength exceeding 10 N per pin is required for repeated cable mating under stress.
Related Guides
STM32H753VIT6 High-Performance MCU Design Guide
Practical STM32H753VIT6 design guidance for power, clocks, memory, DMA, PCB layout, bring-up, and production recovery.
Aug 3, 2026
STM32H753ZIT6 Selection Guide for High-Performance Embedded Systems
Select the STM32H753ZIT6 by evaluating compute, memory, LQFP144 pinout, power, interfaces, security, and sourcing requirements.
Aug 3, 2026
ICL7660ACPAZ Negative Voltage Charge Pump Design Guide
Design a reliable ICL7660ACPAZ negative rail with capacitor equations, layout rules, startup checks, and practical troubleshooting.
Aug 2, 2026
C0402C103K3RACTU 10 nF MLCC Design Guide
Practical guidance for applying the C0402C103K3RACTU 10 nF, 25 V X7R MLCC in decoupling, filtering, timing, and EMI-control networks.
Aug 2, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 175+ | $0.9780 | $171.15 |
| 500+ | $0.8210 | $410.50 |
| 1000+ | $0.7130 | $713.00 |
| 2000+ | $0.6930 | $1386.00 |
| 5000+ | $0.5790 | $2895.00 |
| 5075+ | $0.5362 | $2720.96 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector