TSM-103-05-SM-DV-P SAMTEC Connector (Other) In Stock
SAMTEC TSM-103-05-SM-DV-P is a 6-pin dual-row surface-mount terminal strip at 0.100-inch pitch with dual-vertical SMT termination for compact board signal connections. Designed for automated reflow assembly with a small 3-per-row footprint. Available from stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 6
- Lifecycle
- ACTIVE
- Datasheet
- TSM-103-05-SM-DV-P Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TSM-103-05-SM-DV-P?
- 6-pin dual-row SMT terminal strip at 0.100-inch (2.54 mm) pitch providing a compact 3-per-row signal interface for space-constrained PCB designs
- Dual-vertical (DV) surface-mount termination enables fully automated SMT reflow assembly without secondary through-hole soldering operations
- P-suffix press-fit or pick-and-place packaging option supports high-volume automated board assembly with consistent placement accuracy on standard SMT lines
What is TSM-103-05-SM-DV-P used for?
The TSM-103-05-SM-DV-P is used in compact embedded control boards, sensor modules, and IoT devices where a small 6-pin dual-row SMT connector is needed for board-to-board or board-to-cable signal routing at standard 0.100-inch pitch. Its surface-mount dual-vertical configuration integrates seamlessly into automated SMT reflow production flows, reducing manufacturing complexity. It is also popular in development boards and breakout modules requiring a low pin-count standard-pitch interface for prototyping and field wiring.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TSM-103-05-SM-DV-P datasheet?
TSM-103-05-SM-DV-P Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TSM-103-05-SM-DV-P?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What pin count and pitch does the TSM-103-05-SM-DV-P provide, and how does this compare to single-row alternatives?
The TSM-103-05-SM-DV-P provides 6 pins total, arranged as 3 pins per row in a dual-row layout at 0.100-inch (2.54 mm) pitch. Compared to a single-row 6-pin strip, the dual-row design halves the connector length while maintaining the same pin count, making it better suited for width-limited PCB layouts in compact IoT and sensor modules.
How does the dual-vertical SMT termination of the TSM-103-05-SM-DV-P benefit production assembly processes?
The dual-vertical (DV) surface-mount termination allows the TSM-103-05-SM-DV-P to be placed by standard pick-and-place equipment and soldered in a single SMT reflow pass at peak temperatures up to 260°C (for SAC305 lead-free solder), eliminating a secondary through-hole wave-solder step. This reduces process complexity, lowers per-board assembly cost, and is compatible with fully automated production lines processing hundreds of boards per hour.
For a compact sensor node design, when is the TSM-103-05-SM-DV-P a better fit than a micro-pitch connector?
When a design uses a standard 0.100-inch (2.54 mm) grid layout and requires only 6 signal pins, the TSM-103-05-SM-DV-P is easier to source, less expensive, and simpler to hand-probe during debugging than fine-pitch alternatives at 0.050 inch or smaller. Its larger pad size also improves solder joint reliability in environments with moderate vibration up to 5 g, making it appropriate for industrial sensor nodes and outdoor-deployed IoT hardware.
What procurement and availability options exist for the TSM-103-05-SM-DV-P, and is it stocked for fast delivery?
SAMTEC's TSM series is part of the Tiger Buy program, giving the TSM-103-05-SM-DV-P typical stocking lead times of 1 week or less through authorized global distributors with worldwide shipping. Tape-and-reel packaging is available for SMT production runs requiring automated feeder compatibility, and volume pricing steps begin at quantities as low as 100 pieces for cost-effective prototyping or pilot production builds.
Related Guides
How to Choose an Indicator LED: TLMG1100-GS08 Selection Guide
Select TLMG1100-GS08 and evaluate four indicator LED candidates through optical, electrical, footprint, and sourcing checks.
Nov 5, 2026
150141YS73100 Yellow LED Indicator Design and Validation Guide
Design and validate a 150141YS73100 yellow indicator with current-limit calculations, GPIO checks, PWM control, and enclosure visibility tests.
Nov 5, 2026
How to Choose an LMG1020YFFR GaN Gate Driver: Selection and Sourcing Guide
Compare LMG1020 and LMG1210 circuit roles, gate-drive requirements, ordering codes, and sourcing evidence before approving a GaN driver.
Nov 4, 2026
150141YS73100 LED Selection and Procurement Guide
Evaluate 150141YS73100 and four related LEDs using optical, electrical, mechanical, and sourcing checks before production approval.
Nov 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector