TSM-103-04-SM-DH-P-TR SAMTEC Connector (Other) In Stock
Samtec TSM-103-04-SM-DH-P-TR is a 6-position, 0.100-inch pitch surface-mount terminal strip in a dual-row double-height configuration with polarization key, offering reliable SMT board-to-board connectivity for compact embedded designs. Tape-and-reel packaging enables automated pick-and-place assembly in high-volume production. Available from stock with worldwide shipping for industrial and consumer electronics applications.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 6
- Lifecycle
- ACTIVE
- Datasheet
- TSM-103-04-SM-DH-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 6 positions on 0.100 inch (2.54 mm) pitch for compact SMT terminal strip connectivity
- Dual-row double-height (DH) body style matches mating header stack height requirements
- Polarization (P) feature prevents incorrect mating orientation on 6-pin assemblies
- Tape-and-reel (TR) packaging supports automated SMT pick-and-place manufacturing
- Surface-mount termination compatible with standard reflow solder processes
- Samtec TSM series precision-formed contacts for consistent signal integrity on 0.100 inch pitch
Applications
Samtec TSM-103-04-SM-DH-P-TR is used in compact embedded control, sensor interface, and module interconnect applications where a low pin-count 6-position, 0.100-inch pitch SMT terminal strip is required. The polarization key prevents mating errors on 6-pin boards in industrial IoT nodes, motor control sub-boards, and power management modules where incorrect connector orientation could damage circuits. Its tape-and-reel format supports high-volume automated assembly in consumer electronics and white goods production environments.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the polarization feature of TSM-103-04-SM-DH-P-TR prevent assembly errors on 6-position connectors?
TSM-103-04-SM-DH-P-TR includes a physical polarization key in its 6-position, 0.100 inch pitch body that prevents inserting the mating header in the wrong orientation. On compact 6-pin interfaces where pin 1 carries a power rail and pin 6 is ground — or vice versa — reversing polarity could damage ICs rated for 3.3 V or 5 V supply. The polarization key mechanically blocks incorrect insertion during both manual and automated assembly.
What is the significance of the double-height (DH) designation in TSM-103-04-SM-DH-P-TR for PCB layout?
The double-height (DH) designation in TSM-103-04-SM-DH-P-TR indicates the connector body is taller than a standard single-height terminal strip, accommodating a matching double-height mating header to achieve a specific board-to-board stacking distance. This is relevant for PCB stack designs where the vertical clearance between boards must be precisely controlled — typically 4 mm to 12 mm — to fit heat sinks, shielding cans, or cable routing in the inter-board space.
When should a designer use TSM-103-04-SM-DH-P-TR instead of a through-hole 6-pin connector at 0.100 inch pitch?
TSM-103-04-SM-DH-P-TR is preferred when the PCB design uses a fully SMT process with no plated through-holes, saving drilling and plating cost on 6-position interfaces. For boards smaller than 50 mm × 50 mm — such as sensor modules or motor driver sub-boards — eliminating through-hole connectors also improves board rigidity and reduces assembly steps. The tape-and-reel format adds the benefit of automated placement at production line speeds above 1000 placements per hour.
What is the contact pitch and row configuration of TSM-103-04-SM-DH-P-TR, and which mating headers does it accept?
TSM-103-04-SM-DH-P-TR has a 0.100 inch (2.54 mm) contact pitch in a dual-row, 6-position (3 pins per row) surface-mount terminal strip configuration. It mates with Samtec TW, TSW, and M20 series 2.54 mm pitch dual-row male headers as well as industry-standard 0.100 inch pitch pin headers, which are among the most widely available connector types in embedded computing and prototype development kits.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”