TSM-103-04-F-DH-A-K-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-103-04-F-DH-A-K-TR is a 6-position dual-row surface-mount terminal strip with 0.100" (2.54 mm) pitch, gold-plated contacts rated at 3 A per pin, and tape-and-reel packaging for automated SMT assembly. Its compact 3-per-row dual-height configuration suits space-constrained PCB designs requiring reliable low-pin-count interconnect. Stocked at global distributors with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 6
- Lifecycle
- ACTIVE
- Datasheet
- TSM-103-04-F-DH-A-K-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 6-position dual-row layout on 0.100" (2.54 mm) pitch delivering a compact, low-pin-count SMT header in a standard grid footprint
- Gold-plated contacts rated at 3 A per pin supporting mixed signal and moderate power routing within a single 6-pin connector
- Tape-and-reel (TR) packaging ensuring compatibility with automated SMT pick-and-place equipment for high-volume assembly
- Dual-height (DH) SMT design providing increased stand-off for improved solder joint inspection and rework access
Applications
The TSM-103-04-F-DH-A-K-TR is used as a compact 6-position board-to-board or daughter-card header in IoT devices, embedded controllers, and consumer electronics where a standard 0.100" dual-row pitch SMT connector is required. Its 3 A per pin rating makes it suitable for combining GPIO signals and low-power supply connections in a single compact footprint. The tape-and-reel format supports automated high-volume reflow assembly, reducing per-unit labor cost in mass production environments.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How much total current can the TSM-103-04-F-DH-A-K-TR carry, and how does pin count affect power distribution?
The TSM-103-04-F-DH-A-K-TR has 6 positions each rated at 3 A, giving a maximum combined capacity of 18 A across all 6 pins. In practice, designers derate by 20-30% at temperatures above 70°C, limiting reliable total throughput to approximately 12-14 A. For a 5 V microcontroller interface, this allows up to 2 pins to carry power with 4 pins reserved for signal, well within the connector's current budget.
What does the dual-height DH suffix indicate on the TSM-103-04-F-DH-A-K-TR, and why does it matter for SMT rework?
The DH suffix designates a dual-height SMT terminal strip, meaning the connector body stands off the PCB surface by an increased height compared to standard-profile variants. This added clearance—typically 1 to 2 mm above the PCB surface—allows soldering iron tips and hot-air nozzles better access during manual rework of the 6 solder joints, reducing the risk of lifting adjacent pads or heating neighboring components during repair operations.
For a compact 6-pin power and signal interface on an IoT sensor board, how does the TSM-103-04-F-DH-A-K-TR's 0.100" pitch compare to a 0.050" pitch alternative?
The TSM-103-04-F-DH-A-K-TR on 0.100" (2.54 mm) pitch occupies approximately twice the linear length of a 6-pin 0.050" (1.27 mm) pitch connector, but it supports 3 A per pin compared to the 1 A typical for 0.050" pitch variants. For an IoT sensor board needing 1-2 power pins at up to 3 A alongside 4 GPIO signals, the 0.100" pitch is the better choice without requiring separate power connectors.
What SAMTEC mating headers are compatible with the TSM-103-04-F-DH-A-K-TR in a standard PCB-to-PCB stack?
The TSM-103-04-F-DH-A-K-TR mates with SAMTEC's TSW or TSM series 6-position dual-row male headers on the 0.100" (2.54 mm) pitch. These mating headers are available in through-hole and SMT variants with stack heights from 4 mm to 15 mm, enabling flexible board separation in compact embedded modules. The 6-pin count and 2.54 mm pitch are also mechanically compatible with many industry-standard dual-row male headers from other manufacturers.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”