TSM-103-02-TM-DH-A-K-TR SAMTEC Connector (Other) In Stock
The TSM-103-02-TM-DH-A-K-TR is a 6-position, 0.100 inch pitch surface mount terminal strip from SAMTEC in a dual-row configuration with tape-and-reel packaging. It is suited for compact SMT board-to-board connections, debug headers, and signal breakout applications in embedded systems. Available from authorized distributors with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 6
- Lifecycle
- ACTIVE
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 6-position dual-row SMT terminal strip at 0.100 inch (2.54 mm) pitch for standard PCB grid-aligned compact signal connections
- Tape and reel (TR) packaging for automated high-volume pick-and-place SMT assembly without manual component handling
- Dual-row 3x2 configuration provides 6 pins in a minimal 7.62 mm x 5.08 mm PCB footprint
- SAMTEC TSM series quality construction with gold-selective or tin contact finish options for reliable low-resistance mating
Applications
The TSM-103-02-TM-DH-A-K-TR is commonly used as a compact debug or programming header, JTAG connector, or 6-pin power and signal interface in embedded microcontroller boards, IoT modules, and industrial sensor nodes where board space is at a premium. Its 6-position 2.54 mm pitch dual-row layout supports standard JTAG (4-pin), SWD (2-pin plus power), SPI, or I2C breakout headers while occupying minimal PCB area. The tape-and-reel format enables seamless integration into high-volume automated SMT production lines without additional feeder modifications.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the physical layout and pitch of the TSM-103-02-TM-DH-A-K-TR, and how compact is its PCB footprint?
The TSM-103-02-TM-DH-A-K-TR provides 6 positions in a dual-row, 3x2 configuration at 0.100 inch (2.54 mm) pitch. This 3-position per row layout results in a compact PCB footprint of approximately 7.62 mm length by 5.08 mm width, making it one of the smallest dual-row SMT terminal strips in the SAMTEC TSM series while still accommodating 6 independent signal or power connections.
For a compact embedded debug interface, how can the TSM-103-02-TM-DH-A-K-TR support JTAG or SWD programming headers?
The 6-position TSM-103-02-TM-DH-A-K-TR can accommodate a complete ARM SWD debug interface (SWDIO, SWCLK, GND, VCC = 4 pins) plus 2 additional signals such as SWO trace output and reset, all within the 7.62 mm x 5.08 mm footprint at 2.54 mm pitch. For JTAG, the standard 10-pin 0.100 inch header can be reduced to 6 pins by omitting TRST and optional signals, fitting micro-sized PCBs where a standard 10-pin header would consume too much board area.
Is the TSM-103-02-TM-DH-A-K-TR designed for automated SMT production, and what packaging does it come in?
Yes, the TSM-103-02-TM-DH-A-K-TR is supplied in tape and reel (TR) packaging, making it compatible with automated SMT pick-and-place machines and standard reflow soldering at peak temperatures up to 260 degrees C. The tape-and-reel format supports continuous feeder operation during high-volume PCB assembly runs, eliminating the handling delays associated with bulk-packaged 6-pin connectors and maintaining placement accuracy to within 0.1 mm for the 2.54 mm pitch pads.
When would a designer choose the TSM-103-02-TM-DH-A-K-TR over a through-hole 6-pin header for a debug connector?
The TSM-103-02-TM-DH-A-K-TR is preferred over through-hole headers when PCB area is constrained and automated SMT assembly is required, as it eliminates 6 drilled vias and can be placed on either side of a double-sided PCB. For designs where the board is less than 1.2 mm thick or uses a 4-layer or fewer HDI stackup, SMT 6-pin headers also provide better structural fit since through-hole pins on thin boards can crack solder joints under repeated mating forces at the 2.54 mm pitch.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”