TSM-102-05-F-DV-P-TR SAMTEC Connector (Other) In Stock
SAMTEC TSM-102-05-F-DV-P-TR is a 4-position dual-row surface-mount terminal strip with 0.100-inch (2.54 mm) pitch and dual-vertical (DV) termination for reliable SMT board-to-board connectivity. It features a polarization peg (P) for correct mating orientation and is supplied in tape-and-reel format for high-volume automated assembly. Available from authorized distributors with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 4
- Lifecycle
- ACTIVE
- Datasheet
- TSM-102-05-F-DV-P-TR Datasheet PDF
- Category
- Connector
- Price
- From $0.3733(MOQ 5000)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TSM-102-05-F-DV-P-TR?
- 4-position dual-row 0.100 inch (2.54 mm) pitch SMT header in a minimal footprint for space-constrained PCB power or signal interfaces
- Dual-vertical (DV) termination provides two solder anchor points per contact, improving pull strength and co-planarity during SMT reflow assembly
- Polarization peg (P) prevents mis-mating by providing a physical key that aligns mating connectors to the correct orientation every time
What is TSM-102-05-F-DV-P-TR used for?
The TSM-102-05-F-DV-P-TR is suited for compact board-to-board signal and low-power interfaces in consumer electronics, embedded systems, and IoT modules where only 4 connections are needed in a minimal 0.100-inch pitch SMT footprint. Its dual-vertical termination improves mechanical anchoring during vibration, making it appropriate for automotive accessory boards and industrial sensors. The tape-and-reel format supports automated placement on high-speed SMT lines, reducing assembly cost per unit at scale.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TSM-102-05-F-DV-P-TR datasheet?
TSM-102-05-F-DV-P-TR Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TSM-102-05-F-DV-P-TR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the dual-vertical (DV) termination on the TSM-102-05-F-DV-P-TR improve PCB assembly reliability compared to single-tail SMT headers?
The dual-vertical (DV) termination on the TSM-102-05-F-DV-P-TR provides 2 solder tails per contact column rather than 1, effectively doubling the solder joint area and mechanical anchoring force for each of the 4 positions. This increases resistance to pull-out forces and reduces the risk of connector lift-off during the 260°C SMT reflow process or when connector cables are stressed during assembly or field use.
What does the polarization peg (P) on TSM-102-05-F-DV-P-TR do, and in which applications is it especially valuable?
The polarization peg (P) on the TSM-102-05-F-DV-P-TR is a plastic protrusion that mates with a corresponding notch or hole in the mating socket, preventing 180-degree reverse insertion across the 4-position dual-row interface. This keying feature is particularly valuable in field-serviceable equipment such as medical instrumentation, industrial controllers, and consumer devices where technicians may connect modules under time pressure without referencing pin-out diagrams.
What current rating per contact can be expected from the TSM-102-05-F-DV-P-TR in a 4-position power delivery application?
SAMTEC's TSM series 0.100 inch pitch contacts are typically rated for approximately 3A per contact at a maximum continuous current before the temperature rise exceeds allowable limits. For the TSM-102-05-F-DV-P-TR with 4 positions, this means up to 12A aggregate capability across all contacts, subject to de-rating based on the number of contacts simultaneously carrying current and the ambient operating temperature of the application.
Can the TSM-102-05-F-DV-P-TR be used as a lower-cost alternative to board-to-wire screw terminals in 4-connection industrial sensor interfaces?
Yes, the TSM-102-05-F-DV-P-TR can replace 4-position screw terminals in low-vibration sensor interfaces where crimp-terminated mating sockets are acceptable. The SMT footprint reduces board cost compared to through-hole screw terminals, the 0.100 inch pitch fits standard mating housings, and the polarization peg prevents mis-wiring. At volumes above a few hundred units, the tape-and-reel format further lowers assembly cost versus manual screw-terminal placement.
Related Guides
How to Choose an Indicator LED: TLMG1100-GS08 Selection Guide
Select TLMG1100-GS08 and evaluate four indicator LED candidates through optical, electrical, footprint, and sourcing checks.
Nov 5, 2026
150141YS73100 Yellow LED Indicator Design and Validation Guide
Design and validate a 150141YS73100 yellow indicator with current-limit calculations, GPIO checks, PWM control, and enclosure visibility tests.
Nov 5, 2026
How to Choose an LMG1020YFFR GaN Gate Driver: Selection and Sourcing Guide
Compare LMG1020 and LMG1210 circuit roles, gate-drive requirements, ordering codes, and sourcing evidence before approving a GaN driver.
Nov 4, 2026
150141YS73100 LED Selection and Procurement Guide
Evaluate 150141YS73100 and four related LEDs using optical, electrical, mechanical, and sourcing checks before production approval.
Nov 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 5000+ | $0.4658 | $2329.00 |
| 7500+ | $0.4525 | $3393.75 |
| 10000+ | $0.3733 | $3733.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector