TSM-102-01-TL-DV-P SAMTEC Connector (Other) In Stock
The TSM-102-01-TL-DV-P is a compact 4-position dual-row surface-mount terminal strip from SAMTEC with a 0.100 inch (2.54 mm) pitch for wire-to-board connections. It combines signal and power contacts in a dual-voltage configuration and suits low pin-count SMT header applications. Available in stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 4
- Lifecycle
- ACTIVE
- Datasheet
- TSM-102-01-TL-DV-P Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 4-position dual-row surface-mount terminal strip on 0.100 inch (2.54 mm) pitch providing 2 contacts per row in a minimal PCB footprint
- Dual-voltage (DV) rated contacts support simultaneous signal and power wiring in a single compact 4-pin SMT connector housing
- Surface-mount termination enables automated reflow assembly and eliminates through-hole drilling, reducing PCB fabrication cost for low pin-count wire-to-board connections
Applications
The TSM-102-01-TL-DV-P is used in compact wire-to-board interconnects for small embedded modules, LED driver boards, and sensor interface cards where only 4 signal or power connections are needed. Its dual-voltage rating supports mixed power-and-signal harness wiring without requiring separate connectors on the PCB. The SMT package allows it to be placed alongside other surface-mount components in automated assembly, making it a cost-effective choice for high-volume consumer and industrial electronics production.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many positions and rows does the TSM-102-01-TL-DV-P provide, and how are the contacts distributed?
The TSM-102-01-TL-DV-P is a 4-position connector arranged in 2 rows of 2 contacts each on a 0.100 inch (2.54 mm) pitch. The dual-row 2x2 layout delivers a balanced footprint suitable for compact wire-to-board applications where 4 signal or mixed power-and-signal pins must be connected in the smallest possible PCB area.
What does the dual-voltage (DV) designation mean on TSM-102-01-TL-DV-P, and why is it useful in small board designs?
The dual-voltage (DV) designation means the connector is rated to carry both low-level logic signals and higher power-supply voltages simultaneously through its 4 contacts. In a small 4-pin connector this allows one pair of contacts to carry 3.3 V or 5 V power while the other pair carries data signals, eliminating the need for a separate power header and simplifying cable harness wiring in compact embedded PCB designs.
Which mating cable assemblies are compatible with TSM-102-01-TL-DV-P's 0.100 inch pitch and 2x2 layout?
The TSM-102-01-TL-DV-P mates with SAMTEC's SQT, SFSD, or comparable 0.100 inch (2.54 mm) pitch dual-row crimp housings with 4 positions. Standard 28 AWG to 22 AWG stranded wire with crimp terminals fits into these housings, and pre-made 4-pin 2x2 cable assemblies with 2.54 mm pitch connectors commonly available from SAMTEC and third-party suppliers can also be used directly.
When should a designer choose TSM-102-01-TL-DV-P over a through-hole 4-pin header for an SMT PCB design?
On an all-SMT PCB, using the surface-mount TSM-102-01-TL-DV-P avoids the cost of drilling 4 through-holes per connector and keeps the solder process to a single reflow pass. Through-hole 4-pin headers require a separate wave-solder or hand-solder step that adds assembly time and cost. For boards with fine-pitch surface-mount ICs that cannot be mixed with wave solder, the TSM SMT alternative avoids the process compatibility issue entirely.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”