TS461CLTAlternatives & Equivalent Parts
About TS461CLT
TS461CLT is a Integrated Circuit component manufactured by STMicroelectronics. It comes in a SOT23 (5-Pin) package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 6 alternatives for TS461CLT — response within 24 hours.
Specification Comparison
| Parameter | TS461CLTSource | LM4040AIM3-2.5 | TPS60120PWP | TS3A4751RGYR | PIC18F1220-I/SO | 74HC4066D | GRM185R60J225KE26D |
|---|---|---|---|---|---|---|---|
| Manufacturer | STMicroelectronics | Texas Instruments | Texas Instruments | Texas Instruments | Microchip | Nexperia | Murata Electronics |
| Package Type | SOT23 (5-Pin) | SOT23 (3-Pin) | Small Outline Packages | Other | Small Outline Packages | Small Outline Packages | Capacitor Chip Non-polarised |
| Pin Count | 5 | 3 | 20 | 14 | 18 | 14 | 2 |
| Temperature Range | -20.0°C ~ 70.0°C | -40.0°C ~ 85.0°C | -40.0°C ~ 85.0°C | -40.0°C ~ 85.0°C | -40.0°C ~ 85.0°C | -40.0°C ~ 125.0°C | -55.0°C ~ 85.0°C |
| Price | $0.2453 | $0.5956 | $1.8525 | $0.8032 | $2.5400 | $0.0962 | $0.0132 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | OBSOLETE | ACTIVE | ACTIVE | ACTIVE | ACTIVE | NOT RECOMMENDED |
| Electrical Parameters | |||||||
| Factory Lead Time | 16 Weeks | — | — | — | 6 Weeks | — | 10 Weeks |
| YTEOL | 6.3 | 0 | 15 | 15 | 9 | 6.75 | 3 |
| Amplifier Type | OPERATIONAL AMPLIFIER | — | — | — | — | — | — |
| Architecture | VOLTAGE-FEEDBACK | — | — | — | — | — | — |
| Average Bias Current-Max (IIB) | 1 µA | — | — | — | — | — | — |
| Bias Current-Max (IIB) @25C | 0.75 µA | — | — | — | — | — | — |
| Common-mode Reject Ratio-Min | 60 dB | — | — | — | — | — | — |
| Common-mode Reject Ratio-Nom | 85 dB | — | — | — | — | — | — |
| Frequency Compensation | YES | — | — | — | — | — | — |
| Input Offset Voltage-Max | 7000 µV | — | — | — | — | — | — |
| JESD-30 Code | R-PDSO-G5 | R-PDSO-G3 | R-PDSO-G20 | S-PQCC-N14 | R-PDSO-G18 | R-PDSO-G14 | — |
| JESD-609 Code | e4 | e0 | e4 | e4 | e3 | e4 | e3 |
| Low-Bias | NO | — | — | — | — | — | — |
| Low-Offset | NO | — | — | — | — | — | — |
| Micropower | NO | — | — | — | — | — | — |
| Neg Supply Voltage Limit-Max | -6 V | — | — | — | — | — | — |
| Neg Supply Voltage-Nom (Vsup) | -2.5 V | — | — | — | — | — | — |
| Number of Functions | 5 | 1 | 1 | 4 | — | 4 | — |
| Package Body Material | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | — |
| Package Equivalence Code | TSOP5/6,.11,37 | TO-236 | TSSOP20,.25 | LCC14/18,.14SQ,20 | SOP18,.4 | — | — |
| Package Shape | RECTANGULAR | RECTANGULAR | RECTANGULAR | SQUARE | RECTANGULAR | RECTANGULAR | RECTANGULAR PACKAGE |
| Package Style | SMALL OUTLINE, LOW PROFILE, SHRINK PITCH | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | SMALL OUTLINE | SMALL OUTLINE | SMT |
| Packing Method | TR | — | — | — | — | — | 180mm Reel W8P4 |
| Peak Reflow Temperature (Cel) | 260 | 260 | 260 | 260 | 260 | 260 | — |
| Power | NO | — | — | — | — | — | — |
| Programmable Power | NO | — | — | — | — | — | — |
| Qualification Status | Not Qualified | Not Qualified | Not Qualified | Not Qualified | Not Qualified | — | — |
| Slew Rate-Min | 2.8 V/us | — | — | — | — | — | — |
| Slew Rate-Nom | 4 V/us | — | — | — | — | — | — |
| Supply Current-Max | 2.8 mA | — | — | — | 15 mA | — | — |
| Supply Voltage Limit-Max | 6 V | — | — | — | — | — | — |
| Supply Voltage-Nom (Vsup) | 2.5 V | — | — | 1.8 V | — | 4.5 V | — |
| Surface Mount | YES | YES | YES | YES | YES | YES | YES |
| Technology | BIPOLAR | BIPOLAR | — | CMOS | CMOS | CMOS | — |
| Temperature Grade | OTHER | INDUSTRIAL | INDUSTRIAL | INDUSTRIAL | INDUSTRIAL | AUTOMOTIVE | — |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | Tin/Lead (Sn/Pb) | Nickel/Palladium/Gold (Ni/Pd/Au) | Nickel/Palladium/Gold (Ni/Pd/Au) | Matte Tin (Sn) | NICKEL PALLADIUM GOLD | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Terminal Form | GULL WING | GULL WING | GULL WING | NO LEAD | GULL WING | GULL WING | — |
| Terminal Pitch | 0.95 mm | 0.95 mm | 0.65 mm | 0.5 mm | 1.27 mm | 1.27 mm | — |
| Terminal Position | DUAL | DUAL | DUAL | QUAD | DUAL | DUAL | — |
| Time@Peak Reflow Temperature-Max (s) | 30 | NOT SPECIFIED | 30 | 30 | — | 30 | — |
| Unity Gain BW-Nom | 12000 | — | — | — | — | — | — |
| Voltage Gain-Min | 3160 | — | — | — | — | — | — |
| Wideband | NO | — | — | — | — | — | — |
| Pbfree Code | — | Yes | Yes | Yes | Yes | — | Yes |
| Date Of Intro | — | 1992-01-01 | — | — | — | 1991-01-01 | — |
| Analog IC - Other Type | — | TWO TERMINAL VOLTAGE REFERENCE | SWITCHED CAPACITOR REGULATOR | SPST | — | SPST | — |
| Number of Outputs | — | 1 | 1 | — | — | — | — |
| Output Voltage-Max | — | 2.519 V | 3.3 V | — | — | — | — |
| Output Voltage-Min | — | 2.481 V | 3.3 V | — | — | — | — |
| Output Voltage-Nom | — | 2.5 V | 3.3 V | — | — | — | — |
| Temp Coef of Voltage-Max | — | 100 ppm/°C | — | — | — | — | — |
| Trim/Adjustable Output | — | NO | — | — | — | — | — |
| Voltage Tolerance-Max | — | 0.1% | — | — | — | — | — |
| ## LM4040AIM3-2.5 Alternates Showing results | — | Image | — | — | — | — | — |
| Control Mode | — | — | CURRENT-MODE | — | — | — | — |
| Input Voltage-Max | — | — | 3.6 V | 3.6 V | — | — | — |
| Input Voltage-Min | — | — | 1.8 V | — | — | — | — |
| Input Voltage-Nom | — | — | 2 V | — | — | — | — |
| Output Current-Max | — | — | 0.2 A | — | — | — | — |
| Switcher Configuration | — | — | DOUBLER INVERTER | — | — | — | — |
| Switching Frequency-Max | — | — | 450 kHz | — | — | — | — |
| ## TPS60120PWP Alternates Showing results | — | — | Image | — | — | — | — |
| Additional Feature | — | — | — | Configuration : 1:1 SPST | — | — | — |
| Bandwidth-Nom | — | — | — | 125 MHz | — | — | — |
| Normal Position | — | — | — | NO | — | — | — |
| Number of Channels | — | — | — | 4 | — | 1 | — |
| Off-state Isolation-Nom | — | — | — | 61 dB | — | 50 dB | — |
| On-state Resistance Match-Nom | — | — | — | 0.09 Ω | — | 5 Ω | — |
| On-state Resistance-Max (Ron) | — | — | — | 2 Ω | — | 142 Ω | — |
| Output | — | — | — | SEPARATE OUTPUT | — | — | — |
| Supply Current-Max (Isup) | — | — | — | 0.01 mA | — | — | — |
| Supply Voltage-Max (Vsup) | — | — | — | 3.3 V | — | 10 V | — |
| Supply Voltage-Min (Vsup) | — | — | — | 1.6 V | — | 2 V | — |
| Switch-off Time-Max | — | — | — | 12 ns | — | 45 ns | — |
| Switch-on Time-Max | — | — | — | 20 ns | — | 30 ns | — |
| Switching | — | — | — | BREAK-BEFORE-MAKE | — | — | — |
| ## TS3A4751RGYR Alternates Showing results | — | — | — | Image | — | — | — |
| Manufacturer Package Code | — | — | — | — | SOIC-18 | — | — |
| Has ADC | — | — | — | — | YES | — | — |
| Bit Size | — | — | — | — | 8 | — | — |
| Boundary Scan | — | — | — | — | NO | — | — |
| CPU Family | — | — | — | — | PIC18 | — | — |
| Clock Frequency-Max | — | — | — | — | 40 MHz | — | — |
| DAC Channels | — | — | — | — | NO | — | — |
| DMA Channels | — | — | — | — | NO | — | — |
| Format | — | — | — | — | FIXED POINT | — | — |
| Integrated Cache | — | — | — | — | NO | — | — |
| Low Power Mode | — | — | — | — | YES | — | — |
| Number of External Interrupts | — | — | — | — | 3 | — | — |
| Number of I/O Lines | — | — | — | — | 16 | — | — |
| Number of Serial I/Os | — | — | — | — | 1 | — | — |
| Number of Timers | — | — | — | — | 4 | — | — |
| On Chip Data RAM Width | — | — | — | — | 8 | — | — |
| On Chip Program ROM Width | — | — | — | — | 8 | — | — |
| PWM Channels | — | — | — | — | YES | — | — |
| RAM (bytes) | — | — | — | — | 256 | — | — |
| RAM (words) | — | — | — | — | 256 | — | — |
| ROM (words) | — | — | — | — | 4096 | — | — |
| ROM Programmability | — | — | — | — | FLASH | — | — |
| Screening Level | — | — | — | — | TS 16949 | — | — |
| Speed | — | — | — | — | 40 MHz | — | — |
| Supply Voltage-Max | — | — | — | — | 5.5 V | — | — |
| Supply Voltage-Min | — | — | — | — | 4.2 V | — | — |
| Supply Voltage-Nom | — | — | — | — | 5 V | — | — |
| uPs/uCs/Peripheral ICs Type | — | — | — | — | MICROCONTROLLER, RISC | — | — |
| ## PIC18F1220-I/SO Alternates Showing results | — | — | — | — | Image | — | — |
| Reach Compliance Code | — | — | — | — | — | — | Compliant |
| Capacitance | — | — | — | — | — | — | 2.2 µF |
| Capacitor Type | — | — | — | — | — | — | CERAMIC CAPACITOR |
| Dielectric Material | — | — | — | — | — | — | CERAMIC |
| Height | — | — | — | — | — | — | 0.5 mm |
| Mounting Feature | — | — | — | — | — | — | SURFACE MOUNT |
| Multilayer | — | — | — | — | — | — | Yes |
| Negative Tolerance | — | — | — | — | — | — | 10% |
| Positive Tolerance | — | — | — | — | — | — | 10% |
| Rated (DC) Voltage (URdc) | — | — | — | — | — | — | 6.3 V |
| Size Code | — | — | — | — | — | — | 1608M/0603 |
| Temperature Characteristics Code | — | — | — | — | — | — | X5R |
| Temperature Coefficient | — | — | — | — | — | — | 15% ppm/°C |
| Terminal Shape | — | — | — | — | — | — | WRAPAROUND |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 6 alternatives for TS461CLT — response within 24 hours.
Quick Links
suggested
suggested
suggested
suggested
suggested
Why Look for Alternatives?
Finding alternatives for TS461CLT is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating TS461CLT replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for TS461CLT. Get expert recommendations within 24 hours.
FAQ
What is equivalent to TS461CLT?
Known equivalents for TS461CLT include LM4040AIM3-2.5, TPS60120PWP, TS3A4751RGYR. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of TS461CLT?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify TS461CLT alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.