TS3A4751RGYRAlternatives & Equivalent Parts
About TS3A4751RGYR
TS3A4751RGYR is a Integrated Circuit component manufactured by Texas Instruments. It comes in a Other package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for TS3A4751RGYR — response within 24 hours.
Specification Comparison
| Parameter | TS3A4751RGYRSource | LM4040AIM3-2.5 | TPS60120PWP | TS461CLT | ESDA6V1SC6 |
|---|---|---|---|---|---|
| Manufacturer | Texas Instruments | Texas Instruments | Texas Instruments | STMicroelectronics | STMicroelectronics |
| Package Type | Other | SOT23 (3-Pin) | Small Outline Packages | SOT23 (5-Pin) | SOT23 (6-Pin) |
| Pin Count | 14 | 3 | 20 | 5 | 6 |
| Temperature Range | -40.0°C ~ 85.0°C | -40.0°C ~ 85.0°C | -40.0°C ~ 85.0°C | -20.0°C ~ 70.0°C | -55.0°C ~ 150.0°C |
| Price | $0.8032 | $0.5956 | $1.8525 | $0.2453 | $0.0700 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | OBSOLETE | ACTIVE | ACTIVE | ACTIVE |
| Electrical Parameters | |||||
| Pbfree Code | Yes | Yes | Yes | — | — |
| YTEOL | 15 | 0 | 15 | 6.3 | 6 |
| Additional Feature | Configuration : 1:1 SPST | — | — | — | — |
| Analog IC - Other Type | SPST | TWO TERMINAL VOLTAGE REFERENCE | SWITCHED CAPACITOR REGULATOR | — | — |
| Bandwidth-Nom | 125 MHz | — | — | — | — |
| Input Voltage-Max | 3.6 V | — | 3.6 V | — | — |
| JESD-30 Code | S-PQCC-N14 | R-PDSO-G3 | R-PDSO-G20 | R-PDSO-G5 | R-PDSO-G6 |
| JESD-609 Code | e4 | e0 | e4 | e4 | e3 |
| Normal Position | NO | — | — | — | — |
| Number of Channels | 4 | — | — | — | — |
| Number of Functions | 4 | 1 | 1 | 5 | — |
| Off-state Isolation-Nom | 61 dB | — | — | — | — |
| On-state Resistance Match-Nom | 0.09 Ω | — | — | — | — |
| On-state Resistance-Max (Ron) | 2 Ω | — | — | — | — |
| Output | SEPARATE OUTPUT | — | — | — | — |
| Package Body Material | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY |
| Package Equivalence Code | LCC14/18,.14SQ,20 | TO-236 | TSSOP20,.25 | TSOP5/6,.11,37 | — |
| Package Shape | SQUARE | RECTANGULAR | RECTANGULAR | RECTANGULAR | RECTANGULAR |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH | SMALL OUTLINE, LOW PROFILE, SHRINK PITCH | SMALL OUTLINE |
| Peak Reflow Temperature (Cel) | 260 | 260 | 260 | 260 | 260 |
| Qualification Status | Not Qualified | Not Qualified | Not Qualified | Not Qualified | Not Qualified |
| Supply Current-Max (Isup) | 0.01 mA | — | — | — | — |
| Supply Voltage-Max (Vsup) | 3.3 V | — | — | — | — |
| Supply Voltage-Min (Vsup) | 1.6 V | — | — | — | — |
| Supply Voltage-Nom (Vsup) | 1.8 V | — | — | 2.5 V | — |
| Surface Mount | YES | YES | YES | YES | YES |
| Switch-off Time-Max | 12 ns | — | — | — | — |
| Switch-on Time-Max | 20 ns | — | — | — | — |
| Switching | BREAK-BEFORE-MAKE | — | — | — | — |
| Technology | CMOS | BIPOLAR | — | BIPOLAR | AVALANCHE |
| Temperature Grade | INDUSTRIAL | INDUSTRIAL | INDUSTRIAL | OTHER | — |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | Tin/Lead (Sn/Pb) | Nickel/Palladium/Gold (Ni/Pd/Au) | Nickel/Palladium/Gold (Ni/Pd/Au) | Matte Tin (Sn) |
| Terminal Form | NO LEAD | GULL WING | GULL WING | GULL WING | GULL WING |
| Terminal Pitch | 0.5 mm | 0.95 mm | 0.65 mm | 0.95 mm | — |
| Terminal Position | QUAD | DUAL | DUAL | DUAL | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 | NOT SPECIFIED | 30 | 30 | — |
| ## TS3A4751RGYR Alternates Showing results | Image | — | — | — | — |
| Date Of Intro | — | 1992-01-01 | — | — | — |
| Number of Outputs | — | 1 | 1 | — | — |
| Output Voltage-Max | — | 2.519 V | 3.3 V | — | — |
| Output Voltage-Min | — | 2.481 V | 3.3 V | — | — |
| Output Voltage-Nom | — | 2.5 V | 3.3 V | — | — |
| Temp Coef of Voltage-Max | — | 100 ppm/°C | — | — | — |
| Trim/Adjustable Output | — | NO | — | — | — |
| Voltage Tolerance-Max | — | 0.1% | — | — | — |
| ## LM4040AIM3-2.5 Alternates Showing results | — | Image | — | — | — |
| Control Mode | — | — | CURRENT-MODE | — | — |
| Input Voltage-Min | — | — | 1.8 V | — | — |
| Input Voltage-Nom | — | — | 2 V | — | — |
| Output Current-Max | — | — | 0.2 A | — | — |
| Switcher Configuration | — | — | DOUBLER INVERTER | — | — |
| Switching Frequency-Max | — | — | 450 kHz | — | — |
| ## TPS60120PWP Alternates Showing results | — | — | Image | — | — |
| Factory Lead Time | — | — | — | 16 Weeks | 25 Weeks |
| Amplifier Type | — | — | — | OPERATIONAL AMPLIFIER | — |
| Architecture | — | — | — | VOLTAGE-FEEDBACK | — |
| Average Bias Current-Max (IIB) | — | — | — | 1 µA | — |
| Bias Current-Max (IIB) @25C | — | — | — | 0.75 µA | — |
| Common-mode Reject Ratio-Min | — | — | — | 60 dB | — |
| Common-mode Reject Ratio-Nom | — | — | — | 85 dB | — |
| Frequency Compensation | — | — | — | YES | — |
| Input Offset Voltage-Max | — | — | — | 7000 µV | — |
| Low-Bias | — | — | — | NO | — |
| Low-Offset | — | — | — | NO | — |
| Micropower | — | — | — | NO | — |
| Neg Supply Voltage Limit-Max | — | — | — | -6 V | — |
| Neg Supply Voltage-Nom (Vsup) | — | — | — | -2.5 V | — |
| Packing Method | — | — | — | TR | — |
| Power | — | — | — | NO | — |
| Programmable Power | — | — | — | NO | — |
| Slew Rate-Min | — | — | — | 2.8 V/us | — |
| Slew Rate-Nom | — | — | — | 4 V/us | — |
| Supply Current-Max | — | — | — | 2.8 mA | — |
| Supply Voltage Limit-Max | — | — | — | 6 V | — |
| Unity Gain BW-Nom | — | — | — | 12000 | — |
| Voltage Gain-Min | — | — | — | 3160 | — |
| Wideband | — | — | — | NO | — |
| Breakdown Voltage-Max | — | — | — | — | 7.2 V |
| Breakdown Voltage-Min | — | — | — | — | 6.1 V |
| Breakdown Voltage-Nom | — | — | — | — | 6.65 V |
| Clamping Voltage-Max | — | — | — | — | 19 V |
| Configuration | — | — | — | — | COMMON ANODE, 4 ELEMENTS, 4 CHANNEL |
| Diode Element Material | — | — | — | — | SILICON |
| Diode Type | — | — | — | — | TRANS VOLTAGE SUPPRESSOR DIODE |
| Forward Voltage-Max (VF) | — | — | — | — | 1.25 V |
| Non-rep Peak Rev Power Dis-Max | — | — | — | — | 400 W |
| Number of Elements | — | — | — | — | 4 |
| Polarity | — | — | — | — | UNIDIRECTIONAL |
| Reference Standard | — | — | — | — | IEC-61000-4-2; MIL-STD-883E |
| Rep Pk Reverse Voltage-Max | — | — | — | — | 5.25 V |
| Reverse Current-Max | — | — | — | — | 2 µA |
| Reverse Test Voltage | — | — | — | — | 5.25 V |
| ## ESDA6V1SC6 Alternates Showing results | — | — | — | — | Image |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for TS3A4751RGYR — response within 24 hours.
Quick Links
Why Look for Alternatives?
Finding alternatives for TS3A4751RGYR is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating TS3A4751RGYR replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for TS3A4751RGYR. Get expert recommendations within 24 hours.
FAQ
What is equivalent to TS3A4751RGYR?
Known equivalents for TS3A4751RGYR include LM4040AIM3-2.5, TPS60120PWP, TS461CLT. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of TS3A4751RGYR?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify TS3A4751RGYR alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.