TPS79425DGNR Texas Instruments (MSOP) In Stock

TPS79425DGNR is a fixed 2.5 V, low-dropout linear regulator by Texas Instruments with ultra-low noise and high-accuracy output. Key specs: 2.7 V to 5.5 V input range, 200 mV typical dropout at full load, 0.01% maximum load regulation, in an 8-pin MSOP package. Available from stock with worldwide shipping.

ACTIVEVerified Jun 2026
Package / Visual Reference
TPS79425DGNRIC Package
Quick Facts
Manufacturer
Texas Instruments
Package
Pin Count
8
Lifecycle
ACTIVE
Price
From $1.2508(MOQ 100)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Fixed 2.5 V output with 0.01% maximum load regulation for precision analog and RF power supplies
  • Ultra-low dropout of 200 mV and 2.7 V to 5.5 V input range enabling single-cell Li-ion or dual-cell AA operation
  • Low-noise 8-pin MSOP package with enable pin for power-sequencing and standby control in portable systems

Applications

The TPS79425DGNR is designed for noise-sensitive applications such as RF transceivers, precision ADC reference supplies, and audio signal-processing circuits where clean, stable 2.5 V power is required. Its ultra-low noise output and 0.006% maximum line regulation make it an excellent post-regulator after a switching converter in mixed-signal systems. The 8-pin MSOP package and 2.7 V minimum input suit space-constrained portable devices powered by a single Li-ion cell at end-of-discharge.

Specifications

Pbfree CodeYes
YTEOL15
AdjustabilityFIXED
Dropout Voltage1-Nom0.2V
Input Voltage Absolute-Max6V
Input Voltage-Max5.5V
Input Voltage-Min2.7V
JESD-30 CodeS-PDSO-G8
Line Regulation-Max0.006%
Load Regulation-Max0.01%
Number of Functions1
Number of Outputs1
Operating Temperature TJ-Max125°C
Operating Temperature TJ-Min-40 °C
Output Current1-Max0.25A
Output Voltage1-Max2.575V
Output Voltage1-Min2.425V
Output Voltage1-Nom2.5V
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP8,.19
Package ShapeSQUARE
Package StyleSMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
Packing MethodTR, 13 INCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Regulator TypeFIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
Surface MountYES
Terminal FinishNickel/Palladium/Gold (Ni/Pd/Au)
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)30
Voltage Tolerance-Max3%

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.90

Datasheet

TPS79425DGNR Datasheet Download

Official datasheet from Texas Instruments

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How does the TPS79425DGNR's 200 mV dropout voltage benefit single-cell Li-ion battery-powered designs?

A Li-ion cell discharges from 4.2 V down to approximately 3.0 V at cutoff. With only 200 mV typical dropout, the TPS79425DGNR maintains its 2.5 V regulated output until the cell drops to about 2.7 V, which closely matches the device's 2.7 V minimum input specification. This low dropout maximises usable battery capacity compared to regulators with 500 mV to 1 V dropout voltages.

For an RF front-end supply, why does the 0.006% line regulation and ultra-low noise of the TPS79425DGNR matter?

RF circuits are sensitive to power-supply noise because noise couples into oscillators and mixers, raising phase noise and degrading receive sensitivity. The TPS79425DGNR's 0.006% maximum line regulation and ultra-low noise spectral density ensure that supply variations less than 6 mV per volt of input change reach the RF stage, preventing noise-floor degradation at frequencies from DC through several hundred MHz.

How does the TPS79425DGNR compare to a switching regulator for powering a 16-bit ADC reference circuit?

Unlike a switching regulator that introduces ripple at the switching frequency (typically 100 kHz to several MHz), the TPS79425DGNR provides a clean 2.5 V output with inherently low noise, directly compatible with 16-bit ADC reference inputs where even µV-level noise degrades effective resolution. Its 0.01% maximum load regulation keeps the reference voltage stable across varying ADC sampling currents, avoiding code errors at the LSB level.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
From $1.2508
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
100+$1.5108$151.08
250+$1.4268$356.71
500+$1.3892$694.62
2500+$1.2906$3226.53
5000+$1.2641$6320.60
7500+$1.2508$9381.30
pcs
Unit price: $1.5108 · Total: $151.08

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK