TPS73025DBVT Texas Instruments power-management (SOT-23-5) In Stock
TPS73025DBVT is a 150mA LDO regulator with 2.5V fixed output, 220mV dropout, SOT-23-5 package. From $0.91/unit, 1 pc minimum, ships worldwide.
- Manufacturer
- Texas Instruments
- Package
- SOT-23-5
- Pin Count
- 5
- Lifecycle
- ACTIVE
- Datasheet
- TPS73025DBVT Datasheet PDF
- Category
- power-management
- Price
- From $0.3516(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Applications
Ideal for post-regulation in battery-powered portable devices such as wearables and IoT sensors. Also used in noise-sensitive analog circuits requiring a clean, stable 2.5V rail from a 3.3V or higher supply.
Specifications
| outputVoltage | 2.5V |
| outputCurrent | 150mA |
| dropoutVoltage | 220mV |
| inputVoltageMax | 5.5V |
| inputVoltageMin | 2.7V |
| operatingTemperatureMin | -40C |
| operatingTemperatureMax | 125C |
| quiescentCurrent | 75uA |
| Package | SOT-23-5 |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the output voltage of TPS73025DBVT?
The TPS73025DBVT provides a fixed 2.5V output voltage. It is designed for applications requiring a precise, stable 2.5V rail from a higher input supply ranging from 2.7V to 5.5V.
What package does TPS73025DBVT use and how many pins does it have?
The TPS73025DBVT comes in the SOT-23-5 (DBV) package with 5 pins. This compact surface-mount package is ideal for space-constrained PCB designs in portable and wearable electronics.
What are good alternatives to TPS73025DBVT?
Compatible alternatives include the TLV70025DBVR (same pinout, 200mA), XC6206P252MR (Torex, 200mA, SOT-23-3), and MIC5504-2.5YM5-TR (Micrel, 150mA, SOT-23-5). Always verify output voltage and dropout specs before substituting.
Is TPS73025DBVT RoHS compliant?
Yes, the TPS73025DBVT is RoHS compliant and lead-free. It meets EU RoHS Directive requirements, making it suitable for use in environmentally regulated end products.
What is the typical dropout voltage of TPS73025DBVT?
The TPS73025DBVT has a typical dropout voltage of approximately 220mV at 150mA output current. This low dropout makes it well-suited for battery-powered applications where input-output voltage headroom is limited.
Related Guides
DP83848 10/100 Mbps Ethernet PHY Transceiver: How to Choose the Right Variant
A complete selection guide for the DP83848 family: compare temperature grades, packages, JTAG support, and interface options across all five variants.
Jun 2, 2026
LM5156 Wide-VIN Boost/SEPIC/Flyback Controller: How to Choose the Right Variant
A concise selection guide for the LM5156 and LM51561 family: how to choose between automotive vs industrial grade, spread-spectrum vs fixed-frequency, and WSON-8 vs HTSSOP-14 package.
Jun 2, 2026
24LC01B I2C EEPROM Design Guide: Pinout, Write Timing, and Package Selection
Complete application note for the Microchip 24LC01B 1 Kbit I2C EEPROM: address wiring, pull-up sizing, acknowledge polling, page-write alignment, and package selection.
Jun 1, 2026
AD8531ARTZ-REEL7 Application Note: High-Current Op-Amp Design Guide
A complete design guide for the AD8531ARTZ-REEL7 250 mA rail-to-rail op-amp: decoupling, thermal budgeting, capacitive load stability, and PCB layout best practices.
Jun 1, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.9100 | $0.91 |
| 10+ | $0.6530 | $6.53 |
| 21+ | $0.6250 | $13.13 |
| 23+ | $0.6094 | $14.02 |
| 25+ | $0.5884 | $14.71 |
| 84+ | $0.3516 | $29.53 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”