TPS54334DRCR Texas Instruments Integrated Circuit (Other) In Stock
The TPS54334DRCR is a 3 A, 28 V input synchronous step-down (buck) DC-DC converter with integrated high- and low-side MOSFETs. It operates from a 4.2 V to 28 V input, delivers an adjustable output from 0.8 V, and switches at up to 2.5 MHz in a compact 10-pin VFDFN package.
- Manufacturer
- Texas Instruments
- Package
- Other
- Pin Count
- 15
- Lifecycle
- ACTIVE
- Datasheet
- TPS54334DRCR Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.6495(MOQ 100)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TPS54334DRCR?
- 3 A continuous output current with integrated high- and low-side MOSFETs for high efficiency up to 95%
- Wide 4.2 V to 28 V input voltage range supports automotive and industrial 12 V / 24 V rails
- Adjustable switching frequency up to 2.5 MHz enables small external inductors and capacitors
- Eco-mode light-load operation reduces quiescent current to 60 µA for standby power savings
- 10-pin VFDFN (3 mm × 3 mm) package with exposed thermal pad minimises PCB footprint
What is TPS54334DRCR used for?
The TPS54334DRCR is well-suited for industrial equipment power rails, point-of-load conversion from 12 V or 24 V bus voltages in factory automation and test systems. It is also used in automotive non-safety accessories and infotainment boards where a compact, efficient 3 A buck regulator operating across the full 4.2 V to 28 V input range is required. Telecom and networking line cards leverage its high switching frequency to achieve low-profile magnetics while meeting strict EMI constraints.
What are the specifications of TPS54334DRCR?
| Pbfree Code | Yes |
| YTEOL | 15 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Input Voltage-Max | 28V |
| Input Voltage-Min | 4.2V |
| JESD-30 Code | S-PDSO-N10 |
| JESD-609 Code | e4 |
| Number of Functions | 1 |
| Number of Outputs | 1 |
| Output Current-Max | 3A |
| Output Voltage-Max | 25V |
| Output Voltage-Min | 0.8V |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | SQUARE |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE |
| Peak Reflow Temperature (Cel) | 260 |
| Surface Mount | YES |
| Switcher Configuration | BUCK |
| Switching Frequency-Max | 570kHz |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.90 |
| Country of Origin | Philippines |
Where can I find the TPS54334DRCR datasheet?
TPS54334DRCR Datasheet DownloadOfficial datasheet from Texas Instruments
What are equivalent replacements for TPS54334DRCR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the maximum continuous output current the TPS54334DRCR can supply, and how does thermal performance affect it?
The TPS54334DRCR is rated for 3 A continuous output current. At full load the integrated MOSFETs dissipate heat through the exposed 3 mm × 3 mm thermal pad; with adequate copper pour and airflow the device maintains regulation from -40 °C to 150 °C junction temperature, allowing sustained 3 A delivery in most industrial environments.
How wide is the TPS54334DRCR input voltage range, and which power rails does that cover?
The device accepts inputs from 4.2 V to 28 V, covering single-cell Li-ion packs at approximately 4.2 V, standard 5 V USB or logic rails, 12 V automotive and industrial bus voltages, and 24 V process-control rails. This wide range eliminates the need for separate pre-regulators in mixed-voltage systems.
When is TPS54334DRCR a practical alternative to discrete MOSFET + controller solutions in a 12 V industrial design?
For load currents up to 3 A the TPS54334DRCR replaces two external MOSFETs, a gate driver, and separate bootstrap components, saving roughly 30 % PCB area compared to a discrete design. Its current-mode PWM control and integrated 60 µA Eco-mode cut bill-of-materials cost while meeting efficiency targets above 90 % at typical 12 V input, 5 V / 3 A output conditions.
What switching frequency does TPS54334DRCR support, and how does that influence passive component selection?
The switching frequency is adjustable up to 2.5 MHz via a single resistor. Higher frequencies—for example 1 MHz to 2 MHz—allow inductors in the 1 µH to 2.2 µH range and output capacitors below 47 µF, reducing solution height to under 2 mm and fitting space-constrained PCBs in portable or automotive applications.
What is the minimum output voltage achievable with TPS54334DRCR?
The reference voltage is 0.8 V, so the output can be regulated down to 0.8 V by setting the resistor-divider feedback network accordingly. This covers modern FPGA and processor core rails that require sub-1 V supplies, making the device suitable for SoC power trees where core voltages of 0.9 V or 1.0 V are common.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 100+ | $1.3364 | $133.64 |
| 250+ | $1.2606 | $315.16 |
| 285+ | $0.7023 | $200.16 |
| 370+ | $0.6759 | $250.08 |
| 465+ | $0.6495 | $302.02 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit