TPS51610RHBR Texas Instruments (HVQCCN) In Stock
TPS51610RHBR is a single-output synchronous buck switching controller by Texas Instruments supporting 3 V to 28 V input and up to 40 A output. Key specs: 28 V maximum input voltage, 32-pin QFN package, and adaptive on-time D-CAP2 control for fast transient response. Available in stock with worldwide shipping.
- Manufacturer
- Texas Instruments
- Package
- —
- Pin Count
- 32
- Lifecycle
- ACTIVE
- Datasheet
- TPS51610RHBR Datasheet PDF
- Price
- From $1.1164(MOQ 50)
- Temp Range
- -40.0°C to 105.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TPS51610RHBR?
- Adaptive on-time D-CAP2 control achieves fast load-transient response without an external compensation network, reducing design time and bill-of-materials components
- Wide 3 V to 28 V input voltage range covers 5 V USB-PD, 12 V ATX, and 24 V industrial rails in a single controller device
- Supports multi-phase parallel operation for output currents up to 40 A per phase, enabling scalable power delivery for server CPUs and high-current FPGAs in a compact 32-pin QFN package
What is TPS51610RHBR used for?
TPS51610RHBR drives synchronous buck converters for server motherboard CPU and memory power stages where load currents exceed 20 A and transient response within 50 µs is required. Its 28 V input capability makes it suitable for telecom equipment powered from 24 V bus architectures that also supply 1.8 V and 1.0 V core rails. The device also targets industrial computing and storage systems that demand high-efficiency point-of-load regulation across a wide operating temperature range.
What are the specifications of TPS51610RHBR?
| Pbfree Code | Yes |
| Date Of Intro | 2019-07-23 |
| YTEOL | 15 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Input Voltage-Max | 28V |
| Input Voltage-Min | 3V |
| JESD-30 Code | S-PQCC-N32 |
| JESD-609 Code | e4 |
| Number of Functions | 1 |
| Number of Outputs | 1 |
| Output Current-Max | 60A |
| Output Voltage-Max | 1.5V |
| Output Voltage-Min | 0.3V |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | SQUARE |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
| Peak Reflow Temperature (Cel) | 260 |
| Surface Mount | YES |
| Switcher Configuration | BUCK |
| Switching Frequency-Max | 500kHz |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Terminal Position | QUAD |
| Time@Peak Reflow Temperature-Max (s) | 30 |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 2 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.90 |
| Country of Origin | Malaysia |
Where can I find the TPS51610RHBR datasheet?
TPS51610RHBR Datasheet DownloadOfficial datasheet from Texas Instruments
What are equivalent replacements for TPS51610RHBR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What input voltage range does TPS51610RHBR support, and which power bus architectures does this cover?
TPS51610RHBR operates from a 3 V to 28 V input, covering the 5 V USB-PD bus, 12 V ATX desktop power bus, and 24 V industrial rack supply. This single device can regulate down to 1.0 V core rails in server and industrial computing platforms without requiring a pre-regulator stage, simplifying the power architecture and reducing total component count.
How does TPS51610RHBR's D-CAP2 adaptive on-time control simplify the output filter design compared to voltage-mode controllers?
D-CAP2 eliminates the external Type-III compensation network required by conventional voltage-mode controllers, saving 4 to 6 passive components per channel. The adaptive on-time modulation responds to output voltage deviations in one switching cycle, typically achieving a load-step transient recovery within 5 µs to 10 µs for a 10 A step change—performance comparable to current-mode controllers with full external compensation.
What QFN package dimensions does TPS51610RHBR use, and how does this affect thermal management in a high-current design?
TPS51610RHBR comes in a 32-pin QFN (5 mm × 5 mm body) with an exposed thermal pad. The exposed pad is soldered directly to the PCB ground plane, yielding a junction-to-board thermal resistance of approximately 10 °C/W. In a 12 V to 1.8 V conversion at 20 A output, the controller's own dissipation is typically under 300 mW, keeping junction temperature below 55 °C at 25 °C ambient with 2-layer copper pour.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 50+ | $1.2202 | $61.01 |
| 150+ | $1.1683 | $175.24 |
| 250+ | $1.1164 | $279.10 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”