TPS2023DG4 Texas Instruments Integrated Circuit (Small Outline Packages) In Stock

Texas Instruments TPS2023DG4 is a single-channel USB high-side power switch rated at 5.5 V and 2.2 A peak current limit in SOIC-8 package. Integrates over-current, thermal, and under-voltage protection for reliable USB port power management. Available from stock with worldwide shipping.

OBSOLETEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
TPS2023DG4Small Outline Packages
Quick Facts
Manufacturer
Texas Instruments
Package
Small Outline Packages
Pin Count
8
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of TPS2023DG4?

  • Single-channel high-side MOSFET switch with 2.2 A peak current limit and 1.5 A continuous output current for USB bus-powered port protection
  • Integrated over-current, thermal shutdown, under-voltage lockout, and transient protection eliminate the need for external protection components
  • Active-low enable input with fault flag output in SOIC-8 package enables simple GPIO control and fault detection from a host MCU

What is TPS2023DG4 used for?

The TPS2023DG4 is designed for USB host ports, USB hubs, and notebook computer docking stations where each downstream port requires independent current-limited power control. Its integrated thermal shutdown and over-current protection guard against short-circuit events on USB cable connections without requiring a host software response. The SOIC-8 package and single-supply 5 V operation allow direct placement close to USB Type-A connectors on motherboard and industrial panel PC designs.

What are the specifications of TPS2023DG4?

YTEOL0
Built-in ProtectionsTRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Driver Number of Bits1
Interface IC TypeBUFFER OR INVERTER BASED PERIPHERAL DRIVER
JESD-30 CodeR-PDSO-G8
JESD-609 Codee4
Number of Functions1
Output Current Flow DirectionSOURCE
Output Current-Max1.5A
Output Peak Current Limit-Nom2.2A
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSOP8,.25
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Supply Voltage-Max5.5V
Supply Voltage-Min2.7V
Supply Voltage-Nom3.3V
Surface MountYES
TechnologyMOS
Temperature GradeINDUSTRIAL
Terminal FinishNICKEL PALLADIUM GOLD
Terminal FormGULL WING
Terminal Pitch1.27mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)30
Turn-off Time40000 µs
Turn-on Time20000 µs
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.60

Where can I find the TPS2023DG4 datasheet?

TPS2023DG4 Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for TPS2023DG4?

Compatible alternatives and drop-in replacements for TPS2023DG4:

TPS2023DRG4Texas Instruments

Buffer/Inverter Based Peripheral Driver, 1 Driver, 2.2A, MOS, PDSO8

View Part →
TPS2023DRTexas Instruments

Buffer/Inverter Based Peripheral Driver, 1 Driver, 2.2A, MOS, PDSO8

View Part →

Frequently Asked Questions

What are the continuous and peak current limits for the TPS2023DG4 USB power switch?

The TPS2023DG4 supports a continuous output current of 1.5 A and a peak current limit of 2.2 A, meeting USB 2.0 and USB 3.0 bus-powered device requirements. The internal current-limiting circuitry activates before the device enters thermal shutdown, protecting both the switch and the connected USB peripheral.

Which protection features are built into the TPS2023DG4 to avoid external protection circuitry?

On-chip protections include over-current limiting at 2.2 A, thermal shutdown that activates around 145°C junction temperature, under-voltage lockout below approximately 1.5 V, and transient suppression. These four protection layers replace discrete PTC fuses and external TVS diodes, simplifying USB port circuitry to a single IC.

How does the TPS2023DG4 report fault conditions to a host microcontroller?

The TPS2023DG4 drives an active-low open-drain fault output pin when an over-current or thermal fault is detected. A host MCU GPIO with an internal pull-up can poll or interrupt on this signal to log fault events, notify users, or disable additional circuitry within a few microseconds of the fault condition.

What supply voltage range does the TPS2023DG4 cover for 5V USB and other bus supply designs?

The TPS2023DG4 operates from 2.7 V to 5.5 V, covering the nominal 5 V USB VBUS rail with full 10% voltage tolerance. The lower bound of 2.7 V also allows use in 3.3 V power distribution rails in embedded systems where a lower-voltage switched supply is needed.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK