TPS2010AD Texas Instruments power-management (SOIC-8) In Stock
The TPS2010AD is a dual USB power switch with 500mA current limit and over-current protection. Operates 2.7–5.5V, -40°C to 85°C, SOIC-8 package. From $1.09/unit, in-stock, ships globally, 1-piece MOQ.
- Manufacturer
- Texas Instruments
- Package
- SOIC-8
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- TPS2010AD Datasheet PDF
- Category
- power-management
- Price
- From $1.0920(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TPS2010AD?
- Dual-channel power distribution with independent enable control
- 500mA current limiting per channel with auto-retry
- Over-current and thermal shutdown protection
- 2.7V–5.5V supply range — compatible with 3.3V and 5V systems
- Low 70mΩ on-resistance minimizes voltage drop
- SOIC-8 package for compact PCB footprint
What is TPS2010AD used for?
The TPS2010AD is widely used in USB ports, bus-powered peripherals, and battery-powered devices requiring controlled power switching. It suits industrial controllers and embedded systems that need reliable short-circuit and thermal protection on power rails.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TPS2010AD datasheet?
TPS2010AD Datasheet DownloadOfficial datasheet from Texas Instruments
What are equivalent replacements for TPS2010AD?
Compatible alternatives and drop-in replacements for TPS2010AD:
Single-channel version from same TPS201x family; identical supply range and current limit, pin-compatible for single-port designs
Dual USB power switch in SOIC-8, 500mA/ch, 2.7–5.5V supply — functionally equivalent drop-in replacement
Frequently Asked Questions
How does the TPS2010AD limit current?
The TPS2010AD uses an internal current-sensing circuit to limit output current to approximately 500mA per channel. When an over-current condition is detected, the device reduces gate drive to the internal FET, clamping current and protecting downstream circuitry. The device auto-retries after the fault clears.
Can the TPS2010AD be used in 3.3V systems?
Yes. The TPS2010AD supports a supply voltage range of 2.7V to 5.5V, making it fully compatible with both 3.3V and 5V system rails. Each channel is independently enabled via an active-high logic input, allowing flexible power sequencing in mixed-voltage designs.
What are common applications for the TPS2010AD?
Typical applications include USB power switching in hubs and embedded hosts, power management in bus-powered peripherals, battery-powered IoT devices, and industrial control boards where short-circuit protection on power distribution rails is required.
What package and pin count does the TPS2010AD use?
The TPS2010AD comes in an 8-pin SOIC package (D suffix). The compact footprint and standard 1.27mm pitch make it easy to hand-solder and compatible with standard PCB libraries. A companion MSOP-8 variant (TPS2010AM) is also available for space-constrained designs.
Are compatible alternatives available if the TPS2010AD is out of stock?
Pin-compatible and functionally similar alternatives include the TPS2011AD (single-channel variant), MIC2026-2YM from Microchip (dual USB switch, same SOIC-8), and NCP380 from onsemi. Always verify current limits and enable polarity against your design requirements before substituting.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $3.3600 | $3.36 |
| 10+ | $2.3200 | $23.20 |
| 75+ | $1.9503 | $146.27 |
| 120+ | $1.1760 | $141.12 |
| 256+ | $1.0920 | $279.55 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”