TPD2EUSB30DRTRAlternatives & Equivalent Parts
About TPD2EUSB30DRTR
TPD2EUSB30DRTR is a Diode component manufactured by Texas Instruments. It comes in a SO Transistor Flat Lead package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 2 alternatives for TPD2EUSB30DRTR — response within 24 hours.
Specification Comparison
| Parameter | TPD2EUSB30DRTRSource | TUSB9261PVP | 5227661-1 |
|---|---|---|---|
| Manufacturer | Texas Instruments | Texas Instruments | TE Connectivity |
| Package Type | SO Transistor Flat Lead | Quad Flat Packages | Other |
| Pin Count | 3 | 64 | 2 |
| Temperature Range | -40.0°C ~ 85.0°C | ~ 70.0°C | -55.0°C ~ 85.0°C |
| Price | $0.1970 | $3.0700 | $1.2800 |
| Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | ACTIVE | ACTIVE |
| Electrical Parameters | |||
| Pbfree Code | Yes | Yes | Yes |
| YTEOL | 15 | 15 | 8 |
| Breakdown Voltage-Min | 7 V | — | — |
| Clamping Voltage-Max | 8 V | — | — |
| Configuration | SINGLE | — | — |
| Diode Element Material | SILICON | — | — |
| Diode Type | TRANS VOLTAGE SUPPRESSOR DIODE | — | — |
| JESD-30 Code | R-PDSO-F3 | S-PQFP-G64 | — |
| JESD-609 Code | e4 | e4 | — |
| Non-rep Peak Rev Power Dis-Max | 45 W | — | — |
| Number of Elements | 1 | — | — |
| Package Body Material | PLASTIC/EPOXY | PLASTIC/EPOXY | — |
| Package Shape | RECTANGULAR | SQUARE | — |
| Package Style | SMALL OUTLINE | FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH | — |
| Peak Reflow Temperature (Cel) | 260 | 260 | — |
| Polarity | UNIDIRECTIONAL | — | — |
| Reference Standard | IEC-61000-4-2, 4-5 | — | — |
| Rep Pk Reverse Voltage-Max | 5.5 V | — | — |
| Surface Mount | YES | YES | — |
| Technology | AVALANCHE | CMOS | — |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | Nickel/Palladium/Gold (Ni/Pd/Au) | — |
| Terminal Form | FLAT | GULL WING | — |
| Terminal Position | DUAL | QUAD | — |
| Time@Peak Reflow Temperature-Max (s) | 30 | 30 | — |
| Bus Compatibility | — | ATA; ATAPI | — |
| Clock Frequency-Max | — | 40 MHz | — |
| Data Transfer Rate-Max | — | 384 MBps | — |
| Drive Interface Standard | — | IEEE 1149.6; IEEE 1149.1 | — |
| Package Equivalence Code | — | TQFP64,.35SQ,16 | — |
| Qualification Status | — | Not Qualified | — |
| Supply Current-Max | — | 0.005 mA | — |
| Supply Voltage-Max | — | 1.155 V | — |
| Supply Voltage-Min | — | 1.045 V | — |
| Supply Voltage-Nom | — | 1.1 V | — |
| Temperature Grade | — | COMMERCIAL | — |
| Terminal Pitch | — | 0.4 mm | — |
| uPs/uCs/Peripheral ICs Type | — | BUS CONTROLLER, UNIVERSAL SERIAL BUS | — |
| Factory Lead Time | — | — | 12 Weeks |
| Additional Feature | — | — | ROHS AND ELV COMPLIANT |
| Body Breadth | — | — | 0.625 inch |
| Body Depth | — | — | 0.625 inch |
| Body Length | — | — | 0.581 inch |
| Body/Shell Style | — | — | JACK |
| Characteristic Impedance | — | — | 50 Ω |
| Connector Type | — | — | RF BNC CONNECTOR |
| Contact Finish Mating | — | — | NOT APPLICABLE |
| Contact Gender | — | — | FEMALE |
| Contact Material | — | — | NOT APPLICABLE |
| Contact Style | — | — | COAX |
| Coupling Type | — | — | BAYONET |
| DIN Conformance | — | — | NO |
| Durability | — | — | 500 Cycles |
| EMI Shielded | — | — | NO |
| Empty Shell | — | — | YES |
| Filter Feature | — | — | NO |
| IEC Conformance | — | — | NO |
| Insertion Force-Max | — | — | 15.1232 N |
| Insulation Resistance | — | — | 5000000000 Ω |
| Insulator Material | — | — | POLYMETHYLPENTENE |
| MIL Conformance | — | — | NO |
| Mains Connector Rating | — | — | 115/230VAC |
| Mixed Contacts | — | — | NO |
| Mounting Option 1 | — | — | LOCKING |
| Mounting Style | — | — | RIGHT ANGLE |
| Mounting Type | — | — | PANEL |
| Number Of Connectors | — | — | ONE |
| Number of Ports | — | — | 1 |
| Operating Frequency-Max | — | — | 4 GHz |
| Option | — | — | GENERAL PURPOSE |
| Panel Mount | — | — | YES |
| Shell Finish | — | — | NICKEL |
| Shell Material | — | — | ZINC ALLOY |
| Terminal Length | — | — | 0.162 inch |
| Termination Type | — | — | SOLDER |
| Total Number of Contacts | — | — | 1 |
| Withdrawl Force-Min | — | — | .278 N |
| Body Material Zinc | — | — | Configuration Features: Number of Positions 1 |
| PCB Mount Orientation Right Angle | — | — | Contact Features: RF Connector Center Contact Underplating Material Nickel |
| RF Connector Center Contact Material Phosphor Bronze | — | — | Dimensions: RF Connector Mated Outer Diameter (Approximate) 14.53 MM |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 2 alternatives for TPD2EUSB30DRTR — response within 24 hours.
Quick Links
suggested
Why Look for Alternatives?
Finding alternatives for TPD2EUSB30DRTR is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating TPD2EUSB30DRTR replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for TPD2EUSB30DRTR. Get expert recommendations within 24 hours.
FAQ
What is equivalent to TPD2EUSB30DRTR?
Known equivalents for TPD2EUSB30DRTR include TUSB9261PVP, 5227661-1. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of TPD2EUSB30DRTR?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify TPD2EUSB30DRTR alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.