TMM-107-01-L-D-RA SAMTEC Connector (Header, Unshrouded - Right Angle PTH Pin) In Stock
Samtec TMM-107-01-L-D-RA is a low-profile dual-row right-angle unshrouded PTH pin header connector with 14 positions, 0.100" pitch, and 10µin gold-over-nickel mating contacts, designed for reliable right-angle board-to-cable and board-to-board connections in space-constrained PCB assemblies.
- Manufacturer
- SAMTEC
- Package
- Header, Unshrouded - Right Angle PTH Pin
- Pin Count
- 14
- Lifecycle
- ACTIVE
- Datasheet
- TMM-107-01-L-D-RA Datasheet PDF
- Category
- Connector
- Price
- From $0.5054(MOQ 7)
- Temp Range
- -55.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TMM-107-01-L-D-RA?
- 14-position dual-row right-angle (RA) PTH pin header at 0.100 inch (2.54 mm) pitch
- Low-profile body (0.155 inch wide x 0.188 inch deep) minimizes connector height for compact enclosures
- Gold (10 µin) over nickel (50 µin) mating contacts ensure low contact resistance and reliable multi-cycle mating
- Tin-over-nickel termination finish on PCB pins compatible with standard lead-free solder reflow
- Through-hole (PTH) mounting provides strong mechanical anchoring against cable pull forces
- RoHS-compliant lead-free construction with 1-week factory lead time for fast procurement
What is TMM-107-01-L-D-RA used for?
TMM-107-01-L-D-RA is used in industrial sensors, embedded control boards, and communications equipment where flat ribbon cables or wire harnesses must connect at a 90-degree angle to the PCB without tall vertical headers. Its low-profile right-angle PTH design is ideal for PCB assemblies housed in shallow enclosures, and the dual-row 14-position layout efficiently routes signal and power contacts in a compact 0.553 inch body length.
What are the specifications of TMM-107-01-L-D-RA?
| Pbfree Code | Yes |
| Factory Lead Time | 1Week |
| YTEOL | 8 |
| Additional Feature | LOW PROFILE |
| Body Breadth | 0.155inch |
| Body Depth | 0.188inch |
| Body Length | 0.553inch |
| Connector Type | BOARD CONNECTOR |
| Contact Finish Mating | GOLD (10) OVER NICKEL (50) |
| Contact Finish Termination | Tin (Sn) - with Nickel (Ni) barrier |
| Contact Gender | MALE |
| Contact Material | PHOSPHOR BRONZE |
| Contact Pattern | RECTANGULAR |
| Contact Style | SQ PIN-SKT |
| DIN Conformance | NO |
| Filter Feature | NO |
| IEC Conformance | NO |
| Insulator Color | BLACK |
| Insulator Material | LIQUID CRYSTAL POLYMER |
| JESD-609 Code | e3 |
| MIL Conformance | NO |
| Mating Contact Pitch | 0.079inch |
| Mating Contact Row Spacing | 0.079inch |
| Mating Information | MULTIPLE MATING PARTS AVAILABLE |
| Mixed Contacts | NO |
| Mounting Style | RIGHT ANGLE |
| Mounting Type | BOARD |
| Number Of Connectors | ONE |
| Number Of PCB Rows | 2 |
| Number of Rows Loaded | 2 |
| Option | GENERAL PURPOSE |
| PCB Contact Pattern | RECTANGULAR |
| PCB Contact Row Spacing | 2mm |
| Plating Thickness | 10u inch |
| Rated Current (Signal) | 3.2A |
| Reference Standard | UL |
| Terminal Length | 0.12inch |
| Terminal Pitch | 2mm |
| Termination Type | SOLDER |
| Total Number of Contacts | 14 |
| Package | Header, Unshrouded - Right Angle PTH Pin |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8536.69.40.40 |
| Country of Origin | Malaysia, Vietnam |
Where can I find the TMM-107-01-L-D-RA datasheet?
TMM-107-01-L-D-RA Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TMM-107-01-L-D-RA?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the right-angle (RA) termination of TMM-107-01-L-D-RA benefit PCB assemblies in shallow or low-clearance enclosures?
The right-angle termination of TMM-107-01-L-D-RA routes mating cable or connector entry parallel to the PCB surface rather than perpendicular. In enclosures with a lid clearance of less than 10 mm above the PCB, this 90-degree exit avoids the vertical height of a straight pin header, allowing the full 14-position dual-row connector to mate even when there is minimal overhead clearance.
What contact finish does TMM-107-01-L-D-RA use on mating surfaces, and how many mating cycles does that support?
TMM-107-01-L-D-RA uses a gold (10 µin) over nickel (50 µin) finish on the mating contact surfaces. A 10 µin gold deposit typically supports a minimum of 50 mating cycles while maintaining contact resistance below a few milliohms, making it suitable for connectors that are mated infrequently during manufacturing or field service rather than subjected to daily insertion cycles.
For a 14-position dual-row header, how long is the TMM-107-01-L-D-RA body along the board edge?
TMM-107-01-L-D-RA has a body length of 0.553 inch (approximately 14 mm), which accommodates 7 positions per row at a 0.100 inch (2.54 mm) pitch in a dual-row format. This compact 14 mm body length is suitable for PCB edge locations where board space along the edge is limited and a longer connector cannot be accommodated.
What lead time and RoHS status should procurement teams expect when sourcing TMM-107-01-L-D-RA?
Samtec lists a factory lead time of 1 week for TMM-107-01-L-D-RA, making it a fast-turnaround option for production restocking. The connector is fully RoHS-compliant and carries a Pb-free code, with tin-over-nickel PCB termination that processes reliably in lead-free reflow ovens at standard peak temperatures of approximately 260°C.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 7+ | $1.6460 | $11.52 |
| 100+ | $1.2000 | $120.00 |
| 500+ | $1.0260 | $513.00 |
| 1000+ | $0.8690 | $869.00 |
| 2000+ | $0.6434 | $1286.74 |
| 5000+ | $0.5054 | $2526.95 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector