TLV73310PDBVT Texas Instruments power-management (SOT-23-5) In Stock
TLV73310PDBVT is a 300mA LDO regulator with 1.0V fixed output, 265mV dropout at full load, SOT-23-5 package. In stock from $0.059/unit, supports global shipping, inquiry accepted.
- Manufacturer
- Texas Instruments
- Package
- SOT-23-5
- Pin Count
- 5
- Lifecycle
- ACTIVE
- Datasheet
- TLV73310PDBVT Datasheet PDF
- Category
- power-management
- Price
- From $0.0551(MOQ 10)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Applications
The TLV73310PDBVT is widely used to power low-voltage digital cores in portable and wearable devices where board space is critical. It also serves as a post-regulator in multi-rail power trees for MCUs, FPGAs, and RF front-end modules requiring a clean 1.0V supply. Industrial sensor nodes and battery-powered IoT devices benefit from its low quiescent current and wide temperature tolerance.
Specifications
| Output Voltage | 1.0V |
| Output Current | 300mA |
| Dropout Voltage | 265mV @ 300mA |
| Input Voltage Range | 1.4V to 5.5V |
| Quiescent Current | 55uA typical |
| Package | SOT-23-5 |
| Operating Temperature | -40 to +125 deg C |
| Package | SOT-23-5 |
Compliance & Regulatory
| RoHS Status | Compliant |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the output voltage of TLV73310PDBVT?
The TLV73310PDBVT provides a fixed 1.0V output voltage with plus or minus 1.5% accuracy over the full operating temperature range of -40 to +125 degrees C.
What package does TLV73310PDBVT use?
TLV73310PDBVT uses the SOT-23-5 (DBV) surface-mount package with 5 pins, measuring approximately 1.6mm x 1.6mm, ideal for space-constrained PCB designs in wearables and IoT devices.
What are common applications for TLV73310PDBVT?
Typical applications include powering MCU digital cores, RF modules, and low-voltage DSPs in portable electronics, wearables, IoT sensors, and industrial equipment requiring a regulated 1.0V rail.
What is a compatible substitute for TLV73310PDBVT?
Compatible substitutes include TLV75301PDBV from Texas Instruments and XC6206P102MR from Torex Semiconductor, both offering 1.0V output, 300mA current, and SOT-23-5 package form factor.
Related Guides
DP83848 10/100 Mbps Ethernet PHY Transceiver: How to Choose the Right Variant
A complete selection guide for the DP83848 family: compare temperature grades, packages, JTAG support, and interface options across all five variants.
Jun 2, 2026
LM5156 Wide-VIN Boost/SEPIC/Flyback Controller: How to Choose the Right Variant
A concise selection guide for the LM5156 and LM51561 family: how to choose between automotive vs industrial grade, spread-spectrum vs fixed-frequency, and WSON-8 vs HTSSOP-14 package.
Jun 2, 2026
24LC01B I2C EEPROM Design Guide: Pinout, Write Timing, and Package Selection
Complete application note for the Microchip 24LC01B 1 Kbit I2C EEPROM: address wiring, pull-up sizing, acknowledge polling, page-write alignment, and package selection.
Jun 1, 2026
AD8531ARTZ-REEL7 Application Note: High-Current Op-Amp Design Guide
A complete design guide for the AD8531ARTZ-REEL7 250 mA rail-to-rail op-amp: decoupling, thermal budgeting, capacitive load stability, and PCB layout best practices.
Jun 1, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 10+ | $0.5900 | $5.90 |
| 25+ | $0.5308 | $13.27 |
| 100+ | $0.4658 | $46.58 |
| 3360+ | $0.0596 | $200.26 |
| 4365+ | $0.0573 | $250.11 |
| 5445+ | $0.0551 | $300.02 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”