TLV2765IPW Texas Instruments Integrated Circuit (Small Outline Packages) In Stock

Name: TLV2765IPW
Brand: Texas Instruments
SKU: TLV2765IPW
Availability: InStock

Texas Instruments TLV2765IPW is a quad voltage-feedback operational amplifier with 500 kHz bandwidth and 3 V single-supply operation in a 16-pin TSSOP package. Features ultra-low 0.2 nA bias current and 76 dB common-mode rejection ratio. Available from stock worldwide with competitive pricing.

ACTIVEIntegrated CircuitVerified Jun 2026

Package / Visual Reference

TLV2765IPWSmall Outline Packages

Quick Facts

Manufacturer: Texas Instruments
Package: Small Outline Packages
Pin Count: 16
Lifecycle: ACTIVE
Datasheet: TLV2765IPW Datasheet PDF
Category: Integrated Circuit
Price: From $3.1400(MOQ 61)
Temp Range: -40.0°C to 85.0°C
RoHS: Compliant
Lead Time: 3–7 business days
Shipping: DHL Express · Worldwide

What are the key features of TLV2765IPW?

500 kHz gain-bandwidth product with voltage-feedback architecture enabling precise signal conditioning in low-power 3 V single-supply systems
Ultra-low input bias current of 0.2 nA maximum (15 fA typical at 25°C) for high-impedance sensor interface applications
76 dB typical common-mode rejection ratio with 55 dB minimum, ensuring clean differential signal amplification in noisy environments
Quad op-amp configuration in compact 16-pin TSSOP (TSSOP-16) package, reducing PCB area by integrating four independent amplifiers

What is TLV2765IPW used for?

The TLV2765IPW is well-suited for battery-powered sensor conditioning circuits, photodiode transimpedance amplifiers, and precision analog front-ends in portable medical and industrial instruments where 3 V supply rails and ultra-low bias current are required. Its quad configuration enables multi-channel signal chains such as bridge amplifiers, active filters, and instrumentation front-ends without increasing component count. The 16-pin TSSOP footprint integrates four channels in minimal board space for handheld and space-constrained designs.

What are the specifications of TLV2765IPW?

Pbfree Code	Yes
YTEOL	15
Amplifier Type	OPERATIONAL AMPLIFIER
Architecture	VOLTAGE-FEEDBACK
Average Bias Current-Max (IIB)	0.0002 µA
Bias Current-Max (IIB) @25C	0.000015 µA
Common-mode Reject Ratio-Min	55dB
Common-mode Reject Ratio-Nom	76dB
Frequency Compensation	YES
Input Offset Current-Max (IIO)	0.000015 µA
Input Offset Voltage-Max	3500 µV
JESD-30 Code	R-PDSO-G16
JESD-609 Code	e4
Low-Bias	YES
Low-Offset	NO
Micropower	YES
Number of Functions	4
Package Body Material	PLASTIC/EPOXY
Package Equivalence Code	TSSOP16,.25
Package Shape	RECTANGULAR
Package Style	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Packing Method	TUBE
Peak Reflow Temperature (Cel)	260
Power	NO
Programmable Power	NO
Qualification Status	Not Qualified
Slew Rate-Min	0.07V/us
Slew Rate-Nom	0.22V/us
Subcategory	Operational Amplifier
Supply Current-Max	0.112mA
Supply Voltage Limit-Max	4V
Supply Voltage-Nom (Vsup)	2.4V
Surface Mount	YES
Technology	CMOS
Temperature Grade	INDUSTRIAL
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Form	GULL WING
Terminal Pitch	0.65mm
Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	30
Unity Gain BW-Nom	500
Voltage Gain-Min	18000
Wideband	NO
Package	Small Outline Packages

Compliance & Regulatory

RoHS Status	Compliant
Lead-Free	Yes (Pb-Free)
Moisture Sensitivity Level	MSL 1
ECCN	EAR99
HTS Code	8542.33.00.01
Country of Origin	Malaysia

Where can I find the TLV2765IPW datasheet?

TLV2765IPW Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for TLV2765IPW?

Compatible alternatives and drop-in replacements for TLV2765IPW:

TLV2765IPWRTexas Instruments

Operational Amplifier, 4 Func, 3500uV Offset-Max, CMOS, PDSO16

View Part →

Compare all alternatives & request quotes →

Frequently Asked Questions

How does TLV2765IPW achieve stable operation from a 3 V single-supply rail in battery-powered sensor designs?

TLV2765IPW is specified for 3 V single-supply operation with a rail-to-rail or near-rail input common-mode range, allowing direct amplification of small sensor signals without a negative supply. The 500 kHz gain-bandwidth and 0.2 nA maximum bias current minimize loading on high-impedance sensors while maintaining accuracy down to the 3 V supply in portable handheld equipment.

What makes the 15 fA typical input bias current of TLV2765IPW suitable for photodiode or pH-probe interfaces?

At 25°C, TLV2765IPW exhibits a typical input bias current of only 15 fA (0.000015 µA), which is orders of magnitude lower than standard CMOS or BJT op-amps. This prevents the amplifier from loading high-impedance sources such as photodiodes or pH probes, preserving measurement accuracy and enabling transimpedance gains of 100 MΩ or higher without significant error.

How many op-amp channels does TLV2765IPW integrate, and how does this compare with using four discrete single op-amps on the same PCB?

TLV2765IPW integrates 4 independent op-amp channels in a single 16-pin TSSOP package. Using four discrete single op-amps would require four separate packages and significantly more PCB area. The quad configuration reduces the component count by 3 packages, simplifies routing, and lowers total power consumption for multi-channel active filter or instrumentation amplifier chains.

Which common-mode rejection ratio specification should engineers use when evaluating TLV2765IPW for a differential signal chain?

Engineers should design to the 55 dB minimum CMRR guaranteed over the full operating range, not the 76 dB typical figure. In practice, a 55 dB CMRR attenuates common-mode noise by a factor of 562, which is adequate for most industrial sensor front-ends operating from a 3 V supply. For tighter noise budgets, external trimming or a dedicated instrumentation amplifier may be required.

Related Guides

CSD87313DMS Synchronous Buck Power Stage Design Guide

Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.

Aug 6, 2026

STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection

Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.

Aug 6, 2026

C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC

Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.

Aug 4, 2026

STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security

Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.

Aug 4, 2026

Why Buy from FindMyChip

Authorized Source

Verified supply chain with full traceability & inspection

Competitive Pricing

Factory-direct from China distributors, low MOQ

Fast Shipping

DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide

Quality Guaranteed

30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

View all Texas Instruments parts →

More from Texas Instruments

SN74HC138PWT

Small Outline Packages

Integrated Circuit

MCP6292IDGKT

Small Outline Packages

Integrated Circuit

CD4511BMN

Dual-In-Line Packages

Integrated Circuit

UCC2803DG4

Small Outline Packages

Integrated Circuit

MC33078DRE4

Small Outline Packages

Integrated Circuit

TLV6710DDCT

SOT23 (6-Pin)

Integrated Circuit

AvailabilityIn Stock

Reference Price (USD)

From $3.1400

Buy from 1pc · Factory-direct pricing

Qty.	Unit Price	Ext. Price
61+	$4.9100	$299.51
500+	$3.5400	$1770.00
1000+	$3.3400	$3340.00
10000+	$3.1400	$31400.00

pcs

Unit price: $4.9100 · Total: $299.51

In Stock · 24h Response · Worldwide Shipping

Direct Contact

WhatsApp Inquiry Email RFQ

Lead Time3-7 business days

MOQFrom 1 piece

ShippingDHL / FedEx / UPS

OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”

James Wright

Supply Chain Director, CircuitPro Ltd, UK

TLV2765IPW Texas Instruments Integrated Circuit (Small Outline Packages) In Stock

What are the key features of TLV2765IPW?

What is TLV2765IPW used for?

What are the specifications of TLV2765IPW?

Compliance & Regulatory

Where can I find the TLV2765IPW datasheet?

What are equivalent replacements for TLV2765IPW?

Frequently Asked Questions

How does TLV2765IPW achieve stable operation from a 3 V single-supply rail in battery-powered sensor designs?

What makes the 15 fA typical input bias current of TLV2765IPW suitable for photodiode or pH-probe interfaces?

How many op-amp channels does TLV2765IPW integrate, and how does this compare with using four discrete single op-amps on the same PCB?

Which common-mode rejection ratio specification should engineers use when evaluating TLV2765IPW for a differential signal chain?

Related Guides

CSD87313DMS Synchronous Buck Power Stage Design Guide

STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection

C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC

STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security

Why Buy from FindMyChip

About Texas Instruments

More from Texas Instruments

You May Also Like