TLP3062A(F Toshiba Integrated Circuit (Dual-In-Line Packages) In Stock
Toshiba TLP3062A(F) is a single-channel phototriac output optocoupler rated at 600 V blocking voltage, 5000 Vrms isolation, and 10 mA input trigger current, in a through-hole DIP package. It provides robust galvanic isolation for AC load switching in industrial and consumer controls. Available in stock worldwide with fast shipping.
- Manufacturer
- Toshiba
- Package
- Dual-In-Line Packages
- Pin Count
- 6
- Lifecycle
- ACTIVE
- Datasheet
- TLP3062A(F Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -25.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 600 V off-state blocking voltage supports direct triac triggering for 120 VAC and 240 VAC mains load switching
- 5000 Vrms isolation voltage meets IEC 60747-5-5 and UL recognition requirements for reinforced insulation in safety-critical AC control circuits
- Low input trigger current of 10 mA enables direct GPIO drive from 3.3 V or 5 V microcontrollers without additional buffer circuitry
Applications
The TLP3062A(F) is commonly used to isolate microcontroller outputs from AC mains-connected triac gate drives in household appliance controls, HVAC fan speed regulators, and light dimmer circuits requiring switching up to 600 V. Its 5000 Vrms isolation rating makes it suitable for industrial motor soft-starters and PLC output modules where reinforced insulation between the control logic and power stage is mandated by safety standards. Power-tool speed controllers and solid-state relay modules also rely on this optocoupler to achieve zero-cross firing with guaranteed isolation.
Specifications
| Reach Compliance Code | Compliant |
| Factory Lead Time | 24Weeks |
| YTEOL | 8 |
| Additional Feature | UL RECOGNIZED |
| Configuration | SINGLE |
| Forward Current-Max | 0.025A |
| Input Trigger Current-Max | 0.01A |
| Isolation Voltage-Max | 5000V |
| Mounting Feature | THROUGH HOLE MOUNT |
| Number of Elements | 1 |
| On-State Current-Max | 0.1A |
| Optoelectronic Device Type | TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR |
| Peak Off-state Voltage-Min | 600V |
| Peak Surge Current | 1.2A |
| Repetitive Peak Off-state Voltage | 600V |
| Reverse Leakage Current-Max | 0.00001A |
| Surface Mount | NO |
| Package | Dual-In-Line Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| HTS Code | 8541.40.80.00 |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the maximum off-state blocking voltage of the TLP3062A(F), and which AC mains voltages does it support?
The TLP3062A(F) has a maximum off-state blocking voltage of 600 V, which provides sufficient margin for switching 120 VAC and 240 VAC mains circuits after accounting for transient spikes. When used with a main-side triac rated at 600 V or higher, the optocoupler can reliably trigger gate current in both AC half-cycles.
How much input trigger current does the TLP3062A(F) require, and can a 3.3 V MCU drive it directly?
The TLP3062A(F) requires a maximum input trigger current of 10 mA. A 3.3 V microcontroller GPIO pin typically sources 8–12 mA, so with a series resistor of approximately 270 Ω the LED forward current can be set to 10 mA. This allows direct GPIO drive without a separate buffer or transistor, simplifying the control circuit layout.
What isolation voltage rating does the TLP3062A(F) carry, and which safety certifications apply?
The TLP3062A(F) is rated for 5000 Vrms isolation voltage and carries UL recognition. This 5000 Vrms rating satisfies the reinforced insulation requirements under IEC 60747-5-5 for working voltages up to 250 VRMS, making it compliant for use in household appliances and industrial equipment certified to IEC 60335 or EN 61010.
For a solid-state relay module that must switch a 240 VAC 10 A resistive load, how should the TLP3062A(F) be paired with an external triac?
In a typical solid-state relay circuit, the TLP3062A(F) drives the gate of an external triac rated at 600 V and at least 15 A, such as the BTA16-600B, through a gate resistor of 100–470 Ω to limit peak gate current. The optocoupler's 600 V phototriac output directly pulses the power triac gate at zero-cross events, achieving isolation between the 5 V logic control side and the 240 VAC, 10 A load side without additional high-voltage gate driver components.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About Toshiba
Toshiba is a leading electronic component manufacturer. FindMyChip sources Toshiba ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”