TLC2201ACP Texas Instruments Integrated Circuit (Dual-In-Line Packages) In Stock
Texas Instruments TLC2201ACP is a single precision low-noise op-amp with 300 µV max input offset voltage, 115 dB typical CMRR, 0.1 pA bias current, and rail-to-rail output swing in an 8-pin DIP package.
- Manufacturer
- Texas Instruments
- Package
- Dual-In-Line Packages
- Pin Count
- 8
- Lifecycle
- OBSOLETE
- Datasheet
- TLC2201ACP Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $3.0000(MOQ 1)
- Temp Range
- ?°C to 70.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TLC2201ACP?
- Ultra-low input bias current of 0.1 pA maximum, enabling accurate signal processing with high-impedance sources such as pH electrodes and photodiodes
- High CMRR of 115 dB typical and 85 dB minimum for superior common-mode noise rejection in instrumentation amplifier topologies
- Low input offset voltage of 300 µV maximum ensures minimal DC error in precision signal conditioning and sensor amplifier designs
- Single op-amp in 8-pin DIP package with internal frequency compensation for stable unity-gain operation without external components
What is TLC2201ACP used for?
The TLC2201ACP is ideal for precision signal conditioning of high-impedance sensors such as pH electrodes, piezoelectric transducers, and photodiode current amplifiers where its 0.1 pA bias current causes negligible offset error. Its 115 dB typical CMRR and 300 µV max offset voltage make it well suited for medical instrumentation front ends, precision weigh scale amplifiers, and industrial strain gauge bridges requiring stable DC accuracy over the full operating temperature range.
What are the specifications of TLC2201ACP?
| Pbfree Code | No |
| YTEOL | 0 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.0001 µA |
| Bias Current-Max (IIB) @25C | 0.0001 µA |
| Common-mode Reject Ratio-Min | 85dB |
| Common-mode Reject Ratio-Nom | 115dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 300 µV |
| JESD-30 Code | R-PDIP-T8 |
| Low-Bias | YES |
| Low-Offset | YES |
| Micropower | NO |
| Neg Supply Voltage Limit-Max | -8 V |
| Neg Supply Voltage-Nom (Vsup) | -5 V |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | DIP8,.3 |
| Package Shape | RECTANGULAR |
| Package Style | IN-LINE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Min | 1.5V/us |
| Slew Rate-Nom | 2.7V/us |
| Supply Current-Max | 1.5mA |
| Supply Voltage Limit-Max | 8V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | NO |
| Technology | CMOS |
| Temperature Grade | COMMERCIAL |
| Terminal Form | THROUGH-HOLE |
| Terminal Pitch | 2.54mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Unity Gain BW-Nom | 1900 |
| Voltage Gain-Min | 70000 |
| Wideband | NO |
| Package | Dual-In-Line Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
Where can I find the TLC2201ACP datasheet?
TLC2201ACP Datasheet DownloadOfficial datasheet from Texas Instruments
What are equivalent replacements for TLC2201ACP?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does TLC2201ACP's 0.1 pA input bias current benefit pH sensor interface designs?
pH electrodes present source impedances of 100 MΩ to 1 GΩ; with TLC2201ACP's maximum input bias current of 0.1 pA, the resulting voltage error is at most 0.1 pA × 1 GΩ = 100 µV—well below the 300 µV offset voltage spec. This makes TLC2201ACP suitable for high-impedance electrochemical sensors without a separate buffer stage or FET-input op-amp.
What common-mode rejection performance does TLC2201ACP provide in a differential measurement circuit?
TLC2201ACP specifies a minimum CMRR of 85 dB and a typical CMRR of 115 dB. At 85 dB minimum, a 10 V common-mode signal at the input is attenuated to roughly 56 µV referred to the output, which is adequate for 12-bit to 14-bit ADC precision in noisy industrial environments where power-line interference couples onto sensor leads.
Can TLC2201ACP operate from a single 5 V supply in a portable medical device?
Yes, TLC2201ACP is designed for single-supply operation and supports supply voltages from 4 V to 16 V (or ±2 V to ±8 V dual supply). From a 5 V single supply the output swings close to both rails, enabling full-span signal processing without a negative supply rail in portable ECG monitors, pulse oximeters, and glucometers operating from lithium coin cells or USB power.
For a precision weigh scale using a 350 Ω strain gauge bridge, does TLC2201ACP provide adequate noise and offset performance?
TLC2201ACP's 300 µV max input offset voltage and low broadband voltage noise make it suitable for strain gauge bridge amplification at moderate gain settings. A 350 Ω bridge with 2 mV/V sensitivity at 5 V excitation produces a 10 mV full-scale signal; at 100 V/V gain the 300 µV offset contributes 30 mV referred to output, which is within calibration range for a 12-bit weigh scale system. Higher precision designs may require external offset nulling.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $4.6200 | $4.62 |
| 100+ | $3.4600 | $346.00 |
| 1000+ | $3.0000 | $3000.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit