TLC072CDGNG4 Texas Instruments Integrated Circuit (Small Outline Packages) In Stock

Texas Instruments TLC072CDGNG4 is a dual general-purpose JFET-input op-amp with 80 dB minimum CMRR and 100 pA maximum bias current in an 8-pin HVSSOP package. It operates on supplies from ±4 V to ±8 V and offers 3 mV max input offset voltage for precision signal conditioning. Available from stock with worldwide shipping.

OBSOLETEIntegrated CircuitVerified May 2026
Package / Visual Reference
TLC072CDGNG4Small Outline Packages
Quick Facts
Manufacturer
Texas Instruments
Package
Small Outline Packages
Pin Count
8
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
?°C to 70.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of TLC072CDGNG4?

  • 100 pA maximum input bias current minimizes error in high-impedance sensor interfaces such as pH probes and photodiodes
  • 80 dB minimum CMRR (95 dB typical) rejects common-mode noise in differential signal paths
  • Wide ±4 V to ±8 V supply range with internal frequency compensation for stable single or dual-supply operation

What is TLC072CDGNG4 used for?

TLC072CDGNG4 is a strong choice for precision analog front-ends in data-acquisition systems, audio filter stages, and instrumentation amplifiers where the source impedance is high and low input bias current is critical. Its dual-amplifier configuration simplifies active filter implementations — such as dual Sallen-Key topologies — within a single 8-pin HVSSOP footprint. Industrial sensor interfaces and medical monitoring equipment also benefit from its 95 dB typical CMRR rejecting 50/60 Hz interference.

What are the specifications of TLC072CDGNG4?

YTEOL0
Amplifier TypeOPERATIONAL AMPLIFIER
ArchitectureVOLTAGE-FEEDBACK
Average Bias Current-Max (IIB)0.0001 µA
Bias Current-Max (IIB) @25C0.00005 µA
Common-mode Reject Ratio-Min80dB
Common-mode Reject Ratio-Nom95dB
Frequency CompensationYES
Input Offset Voltage-Max3000 µV
JESD-30 CodeS-PDSO-G8
JESD-609 Codee4
Low-BiasYES
Low-OffsetNO
MicropowerNO
Number of Functions2
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP8,.19
Package ShapeSQUARE
Package StyleSMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
Packing MethodTUBE
Peak Reflow Temperature (Cel)260
PowerNO
Programmable PowerNO
Qualification StatusNot Qualified
Slew Rate-Min9.5V/us
Slew Rate-Nom16V/us
Supply Current-Max7mA
Supply Voltage Limit-Max17V
Supply Voltage-Nom (Vsup)5V
Surface MountYES
TechnologyBIMOS
Temperature GradeCOMMERCIAL
Terminal FinishNICKEL PALLADIUM GOLD
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)30
Unity Gain BW-Nom10000
Voltage Gain-Min100000
WidebandNO
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.33.00.01

Where can I find the TLC072CDGNG4 datasheet?

TLC072CDGNG4 Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for TLC072CDGNG4?

Compatible alternatives and drop-in replacements for TLC072CDGNG4:

TLC072CDGNTexas Instruments Operational

Amplifier, 2 Func, 1900uV Offset-Max, BIMOS, PDSO8

View Part →
TLC072CDGNRG4Texas Instruments Operational

Amplifier, 2 Func, 1900uV Offset-Max, BIMOS, PDSO8

View Part →

Frequently Asked Questions

How does the 100 pA maximum input bias current of TLC072CDGNG4 affect high-impedance sensor interface accuracy?

At 100 pA maximum bias current, a 10 MΩ source impedance introduces only 1 mV of offset-like error, well within the 3 mV input offset voltage spec. This makes TLC072CDGNG4 suitable for pH electrode buffers, photodiode transimpedance stages, and capacitive humidity sensors where source resistances can exceed 1 MΩ.

What supply voltage range does TLC072CDGNG4 support, and can it run from a single 5 V rail?

TLC072CDGNG4 operates on dual supplies from ±4 V to ±8 V (8 V to 16 V total). A single 5 V supply falls below the minimum 8 V total, so a split ±5 V or ±8 V supply is required. For single-supply 5 V designs, a different TI op-amp in the TLC07x family with rail-to-rail input would be a better choice.

For a second-order active low-pass filter centered at 10 kHz, what makes TLC072CDGNG4's dual configuration and HVSSOP package advantageous?

A second-order Sallen-Key or multiple-feedback low-pass filter at 10 kHz needs 2 op-amp stages. TLC072CDGNG4 provides both amplifiers in one 8-pin HVSSOP package measuring roughly 3 mm × 3 mm, cutting part count by half. The 95 dB typical CMRR also suppresses 50 Hz or 60 Hz power-line interference that would otherwise distort the passband.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK