TL084IDTAlternatives & Equivalent Parts
About TL084IDT
TL084IDT is a Integrated Circuit component manufactured by STMicroelectronics. It comes in a Small Outline Packages package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 7 alternatives for TL084IDT — response within 24 hours.
Specification Comparison
| Parameter | TL084IDTSource | TL084IYDT | TL084CDT | TL084CD | NE555PWE4 | SA555P | MIC29302AWU | ECS-MPI4040R4-220-R |
|---|---|---|---|---|---|---|---|---|
| Manufacturer | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | Texas Instruments | Texas Instruments | Microchip | ECS |
| Package Type | Small Outline Packages | Small Outline Packages | Small Outline Packages | Small Outline Packages | — | Dual-In-Line Packages | Other | Inductors Precision Moulded |
| Pin Count | 14 | 14 | 14 | 14 | — | 8 | 5 | 2 |
| Temperature Range | -40.0°C ~ 105.0°C | -40.0°C ~ 105.0°C | ~ 70.0°C | ~ 70.0°C | — | -40.0°C ~ 85.0°C | — | -55.0°C ~ 125.0°C |
| Price | $0.2238 | $0.3060 | $0.1119 | $0.1234 | — | $0.1670 | $1.1400 | $0.5337 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | ACTIVE | ACTIVE | ACTIVE | ACTIVE | ACTIVE | ACTIVE | OBSOLETE |
| Electrical Parameters | ||||||||
| Factory Lead Time | 10 Weeks | — | 10 Weeks | — | — | — | — | 28 Weeks |
| YTEOL | 4.15 | 4.15 | 4.15 | 4.15 | — | 15 | 14 | 0 |
| Amplifier Type | OPERATIONAL AMPLIFIER | OPERATIONAL AMPLIFIER | OPERATIONAL AMPLIFIER | OPERATIONAL AMPLIFIER | — | — | — | — |
| Architecture | VOLTAGE-FEEDBACK | VOLTAGE-FEEDBACK | VOLTAGE-FEEDBACK | VOLTAGE-FEEDBACK | — | — | — | — |
| Average Bias Current-Max (IIB) | 0.02 µA | 0.02 µA | 0.02 µA | 0.02 µA | — | — | — | — |
| Bias Current-Max (IIB) @25C | 0.0002 µA | 0.0002 µA | 0.0004 µA | 0.0002 µA | — | — | — | — |
| Common-mode Reject Ratio-Min | 80 dB | 80 dB | 70 dB | 70 dB | — | — | — | — |
| Common-mode Reject Ratio-Nom | 86 dB | 86 dB | 86 dB | 86 dB | — | — | — | — |
| Frequency Compensation | YES | YES | YES | YES | — | — | — | — |
| Input Offset Current-Max (IIO) | 0.0001 µA | 0.004 µA | 0.0001 µA | 0.004 µA | — | — | — | — |
| Input Offset Voltage-Max | 13000 µV | 13000 µV | 13000 µV | 13000 µV | — | — | — | — |
| JESD-30 Code | R-PDSO-G14 | R-PDSO-G14 | R-PDSO-G14 | R-PDSO-G14 | — | R-PDIP-T8 | R-PSSO-G5 | — |
| JESD-609 Code | e4 | e3 | e3 | e4 | — | e4 | e3 | e3 |
| Low-Bias | YES | NO | YES | YES | — | — | — | — |
| Low-Offset | NO | NO | NO | NO | — | — | — | — |
| Micropower | NO | NO | NO | NO | — | — | — | — |
| Neg Supply Voltage Limit-Max | -18 V | -18 V | -18 V | -18 V | — | — | — | — |
| Neg Supply Voltage-Nom (Vsup) | -15 V | -15 V | -15 V | -15 V | — | — | — | — |
| Number of Functions | 14 | 14 | 14 | 14 | — | 1 | 1 | 1 |
| Package Body Material | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | — | PLASTIC/EPOXY | PLASTIC/EPOXY | — |
| Package Equivalence Code | SOP14,.25 | SOP14,.25 | SOP14,.25 | SOP14,.25 | — | DIP8,.3 | SMSIP5H,.6,67 | — |
| Package Shape | RECTANGULAR | RECTANGULAR | RECTANGULAR | RECTANGULAR | — | RECTANGULAR | RECTANGULAR | — |
| Package Style | SMALL OUTLINE | SMALL OUTLINE | SMALL OUTLINE | SMALL OUTLINE | — | IN-LINE | SMALL OUTLINE | SMT |
| Packing Method | TR | TR | TR | TUBE | — | — | TUBE | TR, 13 Inch |
| Peak Reflow Temperature (Cel) | 260 | 260 | 260 | 260 | — | — | 245 | — |
| Power | NO | NO | NO | NO | — | — | — | — |
| Programmable Power | NO | NO | NO | NO | — | — | — | — |
| Qualification Status | Not Qualified | Not Qualified | Not Qualified | Not Qualified | — | Not Qualified | — | — |
| Slew Rate-Min | 8 V/us | 8 V/us | 8 V/us | 8 V/us | — | — | — | — |
| Slew Rate-Nom | 16 V/us | 16 V/us | 16 V/us | 16 V/us | — | — | — | — |
| Supply Current-Max | 10 mA | 2.5 mA | 10 mA | 10 mA | — | — | — | — |
| Supply Voltage Limit-Max | 18 V | 18 V | 18 V | 18 V | — | — | — | — |
| Supply Voltage-Nom (Vsup) | 15 V | 15 V | 15 V | 15 V | — | 5 V | — | — |
| Surface Mount | YES | YES | YES | YES | — | NO | YES | YES |
| Technology | BIPOLAR | BIPOLAR | BIPOLAR | BIPOLAR | — | BIPOLAR | — | — |
| Temperature Grade | INDUSTRIAL | INDUSTRIAL | COMMERCIAL | COMMERCIAL | — | INDUSTRIAL | — | — |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | Matte Tin (Sn) - annealed | Matte Tin (Sn) | Nickel/Palladium/Gold (Ni/Pd/Au) | — | Nickel/Palladium/Gold (Ni/Pd/Au) | Matte Tin (Sn) | Tin (Sn) - with Nickel (Ni) barrier |
| Terminal Form | GULL WING | GULL WING | GULL WING | GULL WING | — | THROUGH-HOLE | GULL WING | — |
| Terminal Pitch | 1.27 mm | 1.27 mm | 1.27 mm | 1.27 mm | — | 2.54 mm | 1.702 mm | — |
| Terminal Position | DUAL | DUAL | DUAL | DUAL | — | DUAL | SINGLE | — |
| Time@Peak Reflow Temperature-Max (s) | 30 | — | 30 | 30 | — | — | — | — |
| Unity Gain BW-Nom | 4000 | 4000 | 4000 | 4000 | — | — | — | — |
| Voltage Gain-Min | 25000 | 25000 | 15000 | 25000 | — | — | — | — |
| Wideband | NO | NO | NO | NO | — | — | — | — |
| ## TL084IDT Alternates Showing results | Image | — | — | — | — | — | — | — |
| Screening Level | — | AEC-Q100 | — | — | — | — | TS 16949 | — |
| ## TL084CDT Alternates Showing results | — | — | Image | — | — | — | — | — |
| ## TL084CD Alternates Showing results | — | — | — | Image | — | — | — | — |
| Pbfree Code | — | — | — | — | — | Yes | — | Yes |
| Additional Feature | — | — | — | — | — | CAN ALSO OPERATE FROM A 15V NOMINAL SUPPLY | — | — |
| Analog IC - Other Type | — | — | — | — | — | PULSE; RECTANGULAR | — | — |
| Supply Current-Max (Isup) | — | — | — | — | — | 15 mA | — | — |
| Supply Voltage-Max (Vsup) | — | — | — | — | — | 16 V | — | — |
| Supply Voltage-Min (Vsup) | — | — | — | — | — | 4.5 V | — | — |
| ## SA555P Alternates Showing results | — | — | — | — | — | Image | — | — |
| Manufacturer Package Code | — | — | — | — | — | — | DDPAK-5 | — |
| Adjustability | — | — | — | — | — | — | ADJUSTABLE | — |
| Dropout Voltage1-Max | — | — | — | — | — | — | 0.8 V | — |
| Dropout Voltage1-Nom | — | — | — | — | — | — | 0.56 V | — |
| Line Regulation-Max (%/V) | — | — | — | — | — | — | 0.03633 | — |
| Load Regulation-Max(%) | — | — | — | — | — | — | 1% | — |
| Number of Outputs | — | — | — | — | — | — | 1 | — |
| Operating Temperature TJ-Max | — | — | — | — | — | — | 125 °C | — |
| Operating Temperature TJ-Min | — | — | — | — | — | — | -40 °C | — |
| Output Current1-Max | — | — | — | — | — | — | 3 A | — |
| Output Voltage1-Max | — | — | — | — | — | — | 15 V | — |
| Output Voltage1-Min | — | — | — | — | — | — | 1.24 V | — |
| Regulator Type | — | — | — | — | — | — | ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR | — |
| ## MIC29302AWU Alternates Showing results | — | — | — | — | — | — | Image | — |
| Case/Size Code | — | — | — | — | — | — | — | 1816 |
| Construction | — | — | — | — | — | — | — | Rugged |
| DC Resistance | — | — | — | — | — | — | — | 0.316 Ω |
| Inductance-Nom (L) | — | — | — | — | — | — | — | 22 µH |
| Inductor Application | — | — | — | — | — | — | — | POWER INDUCTOR |
| Inductor Type | — | — | — | — | — | — | — | GENERAL PURPOSE INDUCTOR |
| Package Height | — | — | — | — | — | — | — | 2 mm |
| Package Length | — | — | — | — | — | — | — | 4.45 mm |
| Package Width | — | — | — | — | — | — | — | 4.06 mm |
| Rated Current-Max | — | — | — | — | — | — | — | 1.3 A |
| Reference Standard | — | — | — | — | — | — | — | AEC-Q200 |
| Shape/Size Description | — | — | — | — | — | — | — | RECTANGULAR PACKAGE |
| Shielded | — | — | — | — | — | — | — | YES |
| Special Feature | — | — | — | — | — | — | — | DCR IS MEASERED AT 20 % TOLERANCE |
| Terminal Placement | — | — | — | — | — | — | — | DUAL ENDED |
| Terminal Shape | — | — | — | — | — | — | — | ONE SURFACE |
| Test Frequency | — | — | — | — | — | — | — | 0.1 MHz |
| Tolerance | — | — | — | — | — | — | — | 20% |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 7 alternatives for TL084IDT — response within 24 hours.
Quick Links
Why Look for Alternatives?
Finding alternatives for TL084IDT is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating TL084IDT replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for TL084IDT. Get expert recommendations within 24 hours.
FAQ
What is equivalent to TL084IDT?
Known equivalents for TL084IDT include TL084IYDT, TL084CDT, TL084CD. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of TL084IDT?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify TL084IDT alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.