TL072IPE4 Texas Instruments Integrated Circuit (Dual-In-Line Packages) In Stock
TL072IPE4 is a dual general-purpose JFET-input operational amplifier from Texas Instruments with 3 MHz bandwidth, ±18 V supply, and 100 dB typical CMRR, packaged in an 8-pin PDIP for easy through-hole prototyping.
- Manufacturer
- Texas Instruments
- Package
- Dual-In-Line Packages
- Pin Count
- 8
- Lifecycle
- OBSOLETE
- Datasheet
- TL072IPE4 Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TL072IPE4?
- Dual JFET-input op-amp with 3 MHz gain-bandwidth product for audio, filter, and signal conditioning circuits
- Ultra-low bias current of 0.02 µA max enables high-impedance sensor interfacing without loading errors
- 100 dB typical common-mode rejection ratio for excellent noise suppression in differential measurement applications
- Wide ±18 V (36 V total) supply range accommodates standard ±15 V and ±12 V lab bench and industrial supply rails
What is TL072IPE4 used for?
The TL072IPE4 is a classic choice for audio preamplifiers, active filter stages, and signal conditioning circuits where low-noise JFET inputs minimise interaction with high-impedance microphone or guitar pickup sources. Its 3 MHz bandwidth and wide ±18 V supply range make it versatile across consumer audio, industrial instrumentation, and function generator designs. Engineers also use it in low-power analog computing stages, integrators, and comparator circuits where the standard 8-pin PDIP footprint simplifies breadboard prototyping and through-hole assembly.
What are the specifications of TL072IPE4?
| YTEOL | 0 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.02 µA |
| Bias Current-Max (IIB) @25C | 0.0002 µA |
| Common-mode Reject Ratio-Min | 70dB |
| Common-mode Reject Ratio-Nom | 100dB |
| Frequency Compensation | YES |
| Input Offset Current-Max (IIO) | 0.002 µA |
| Input Offset Voltage-Max | 6000 µV |
| JESD-30 Code | R-PDIP-T8 |
| JESD-609 Code | e4 |
| Low-Bias | YES |
| Low-Offset | NO |
| Micropower | NO |
| Neg Supply Voltage Limit-Max | -18 V |
| Neg Supply Voltage-Nom (Vsup) | -15 V |
| Number of Functions | 2 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | DIP8,.3 |
| Package Shape | RECTANGULAR |
| Package Style | IN-LINE |
| Packing Method | TUBE |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Min | 8V/us |
| Slew Rate-Nom | 13V/us |
| Subcategory | Operational Amplifier |
| Supply Current-Max | 5mA |
| Supply Voltage Limit-Max | 18V |
| Supply Voltage-Nom (Vsup) | 15V |
| Surface Mount | NO |
| Technology | BIPOLAR |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Form | THROUGH-HOLE |
| Terminal Pitch | 2.54mm |
| Terminal Position | DUAL |
| Unity Gain BW-Nom | 3000 |
| Voltage Gain-Min | 25000 |
| Wideband | NO |
| ## TL072IPE4 Alternates Showing results | Image |
| Package | Dual-In-Line Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Malaysia, Mexico, Taiwan |
Where can I find the TL072IPE4 datasheet?
TL072IPE4 Datasheet DownloadOfficial datasheet from Texas Instruments
What are equivalent replacements for TL072IPE4?
Compatible alternatives and drop-in replacements for TL072IPE4:
suggested
suggested
suggested
Frequently Asked Questions
What makes TL072IPE4 JFET inputs advantageous over bipolar inputs for audio preamplifier designs?
TL072IPE4 JFET inputs have a maximum bias current of only 0.02 µA compared to microamperes or more for bipolar op-amps. This extremely low bias current prevents voltage errors across high-impedance sources such as guitar pickups or condenser microphones, resulting in lower distortion and reduced noise in audio preamplifier stages.
What gain-bandwidth product does TL072IPE4 offer and how does it affect active filter cutoff frequency?
TL072IPE4 has a 3 MHz gain-bandwidth product. For an active Sallen-Key low-pass filter set to unity gain, the -3 dB frequency can reach close to 3 MHz, but at a closed-loop gain of 10 dB the bandwidth reduces to approximately 900 kHz. Designers must account for this rolloff when cascading multiple stages in audio crossover or equaliser designs.
Can TL072IPE4 run from a single 12 V supply in automotive or industrial systems, and what output swing results?
TL072IPE4 can operate from a single 12 V supply, as its total supply voltage range spans from ±5 V to ±18 V (10 V to 36 V total). On a single 12 V rail, the output typically swings to within 1 V to 2 V of each rail, yielding approximately 8 V to 10 V of output range, which is adequate for most industrial signal-level applications.
How does the PDIP-8 package of TL072IPE4 compare to SOT-23 or SOP-8 alternatives for prototyping and production?
The 8-pin PDIP package with 2.54 mm pin pitch is the easiest to insert into standard breadboards and DIP sockets, making TL072IPE4 ideal for prototyping analog circuits. For production boards with tight space constraints, designers typically migrate to SOP-8 or TSSOP-8 surface-mount variants, but the PDIP offers simpler hand-soldering and faster iteration during early development phases.
Related Guides
150141RS73100 Red LED Indicator and Current-Resistor Design Guide
Design a reliable 150141RS73100 red LED indicator with worst-case resistor sizing, GPIO checks, PWM drive, layout, and production validation.
Jul 11, 2026
742792651 Ferrite Bead EMI Filter and Power Integrity Design Guide
Practical guidance for using 742792651 in ferrite-bead EMI filters, including bias, DCR, damping, layout, and validation.
Jul 11, 2026
How to Choose a Ferrite Bead for EMI Suppression Rails: Selection Guide
Compare 742792651 and related ferrite beads by impedance, current rating, DCR, package, layout, and EMI test context.
Jul 10, 2026
150141BS73100 Design Guide for 3528 Status Indicator LED Circuits
Design 3528 status indicator LED circuits with 150141BS73100: current setting, resistor sizing, polarity, optics, and sourcing checks.
Jul 10, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit