TFM-115-01-S-D-A-P-TR SAMTEC Connector (Other) In Stock
SAMTEC TFM-115-01-S-D-A-P-TR is a high-reliability Tiger Eye terminal strip with 0.050 inch (1.27 mm) pitch, dual-row, 15-position straight SMT design providing 30 gold-plated contacts for compact fine-pitch board interconnection. Tape-and-reel packaging enables automated SMT assembly. Available from authorized distributors with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 30
- Lifecycle
- ACTIVE
- Datasheet
- TFM-115-01-S-D-A-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TFM-115-01-S-D-A-P-TR?
- 15-position dual-row straight SMT at 0.050 inch (1.27 mm) pitch delivering 30 contacts in an approximately 19 mm row length
- Tiger Eye contact geometry provides superior mating retention force and contact resistance below 20 milliohms per pin
- Tape-and-reel (TR) packaging for seamless integration with automated pick-and-place SMT production lines
What is TFM-115-01-S-D-A-P-TR used for?
The TFM-115-01-S-D-A-P-TR is designed for high-volume automated assembly of compact embedded modules, sensor interface boards, and multi-channel analog-to-digital converter cards requiring 30 fine-pitch connections in minimal PCB space. Its 0.050 inch pitch enables designers to replace a 0.100 inch pitch connector with roughly half the board footprint, and the tape-and-reel format ensures continuous feeder operation without machine stoppages.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TFM-115-01-S-D-A-P-TR datasheet?
TFM-115-01-S-D-A-P-TR Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TFM-115-01-S-D-A-P-TR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
For a 30-signal sensor interface board, how does TFM-115-01-S-D-A-P-TR reduce PCB area compared to standard-pitch connectors?
The TFM-115-01-S-D-A-P-TR accommodates 30 contacts across 15 dual-row positions at 0.050 inch (1.27 mm) pitch, creating a row length of approximately 19 mm. A standard 0.100 inch (2.54 mm) pitch connector for 30 contacts would require about 38 mm of row length. This 50 percent reduction in connector footprint frees significant PCB area for additional signal conditioning components or routing layers on constrained sensor interface designs.
What production volumes justify selecting the tape-and-reel version of TFM-115-01-S-D-A-P-TR over tray packaging?
Tape-and-reel packaging for TFM-115-01-S-D-A-P-TR is most cost-effective for production runs above approximately 200 boards per day, where automated feeder loading eliminates manual tray refills that take 30 to 60 seconds each. At quantities above 500 pieces per order, tape-and-reel pricing is often 5 to 10 percent lower per unit than tray pricing, and reel sizes of 500 or 1000 units reduce procurement frequency.
Can TFM-115-01-S-D-A-P-TR be used on both sides of a board-to-board stack, and what stack heights are available?
Yes, the TFM-115 series is designed to mate with corresponding TFM-series receptacle strips on the opposing board. SAMTEC offers mating receptacle stack heights ranging from approximately 4 mm to over 20 mm in 2 mm increments, accommodating a wide variety of component heights on the mating PCB. Gold over nickel contacts on both connector halves maintain signal integrity at frequencies up to several hundred MHz across the full -55°C to +125°C operating range.
When is TFM-115-01-S-D-A-P-TR a better choice than TFM-115-01-S-D-A-P without the TR suffix?
The TR (tape-and-reel) version is the preferred choice whenever the PCB assembly process uses automated pick-and-place equipment. The non-TR version is typically supplied in trays or cut tape, suitable for prototype builds or low-volume manual assembly of fewer than 50 boards. For medium or high volumes exceeding 200 to 500 units, the TR reel format reduces feeder changeover time and minimizes the risk of misfeeds on fine-pitch 1.27 mm SMT pads.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector